AR15

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags. 

- Compatable with original Pmags and "M" Series only.  These will not work without modifications in Gen 3 or M3 Pmags. We will have another product set up to buy pre-trimmed M3 blocks. Here are instructions on how to trim blocks to work with Gen M3 Pmags:   http://www.calguns.net/calgunforum/showpost.php?p=9787410&postcount=261

- Fits Gen 2 Pmag 20 only (Straight body)

10 Block Bulk Pack

• 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33. 
• You MUST specify the quantity and type of each block below. Please be specific. 

Excludes 10/20 Colt blocks and Gen 3 blocks

10 Round Limiter for Gen M3 30 Round Pmags

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- This block will work in the New Magpul TMAG Gen M3 30-round magazines.

- Attention: We now offer the option to use our block with the Magpul factory retaining plate with our block. The block will sit on top of the Magpul retaining plate and is cut differently than our standard Gen M3 10/30 magblock. If you're planning on not using the factory retaining plate then we have an options for you.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 Pmags in .223/5.56mm, 300 Blackout

- Fits NEW Gen M3 Pmag 20  (Curved body)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed in most rifles. Some trimming of the limiter may be required for this.

- Does not affect reliability.

- No increase in spring pressure. 

ITAC Defense 10 Round Limiter Magblock 10/30

- For use in Itac Defense type 30 round magazines for the AR15. 
- These blocks will convert a 30 round magazine to hold only 10 rounds. 

Kriss Vector 22LR 10/30 Magblock 10 & 15 Round Limiter

- This block will convert 30 round Kriss Vector Extended Magazine 22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

New Hexmag AR-15 Magblock 10/20 Magblock

- Magblock 10/20 MCL block for use in polymer Hexmag AR-15 magazines.

- This block will convert a 20 round magazine to hold only 10 rounds. 

- Uses the original Hexmag locking plates.

Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Steyr Aug Pmags in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Ruger Mini 30 Magblock 5/10 Magazine Capacity Limiter

 This block is for use in RUGER 10 round factory Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 10 round magazine to hold only 5 rounds for hunting.

- Only for use in RUGER manufactured magazines. 

Magazineblock Mag-Rack Magazine Storage Wall Rack For AR-15 PMags and Glock mags

• Mag-Rack magazine storage racks will hold 6-AR15 Pmags or 12-Glock magazines
• Are Mag-Rack magazine storage racks are made from 18-gauge steel and proudly made in the USA
• Each rack comes powder coated for durability
• Will come with magnet kit installed to be mounted on the side of your safe (Best Results) or other metal surface
• Magnets can be removed for wall mounting. 
• Holes allow screw mounting to GallowTech Gun Walls!
• Add a Maglula Rifle or Pistol Loader for a discounted price when you buy a Mag-Rack

Magblock 10/30 limiter for FAB Defense 5.56x45/.223 mm AR Magazines only.

- Tested and designed for FAB Defense AR-15 magazines.
- These blocks will convert a 30 round 5.56x45 mm magazine to hold only 10 rounds with the use of the provided adapter.

Gen M3 Magpul PMag 10/30 limiter 3 Pack Kit

Save time and money by making your magazines legal. 

- This Magblock fits the Gen3/M3 Magpul 30-round Pmags.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for Gen3 20-round and 10-round magazines.

-Magazines can be loaded with the bolt closed.

ASC USGI 6.8 SPC Magblock 10/25 MCL (Magazine Capacity Limiter)

- For use in ASC USGI 6.8 SPC 25 round magazines. 
- These blocks will convert a 25 round magazine to hold only 10 rounds.