AR15
Magblock 10 and 15 round limiters for AR15 and M16 magazines in multiple calibers including 5.56/.223, .308, 9mm, 7.62x39 and 6.8mm.
We have solutions for most popular AR15 Magazines.
-
Magblock Resist Snap-Back Trucker Hat
Magazineblock "RESIST" Trucker Snap-Back Hat
- Snap-Back design perfect for all head sizes
- Trucker style is perfect for spring, summer and fall time wheather
- Great to show off your "Resist" pride
- Offering in Black with red logo and FDE base with OD green front
$28.95 -
Century Arms MKE HK Magblock (5.56)
Century Arms MKE HK 93, 53 and 33 Translucent Polymer Magblock
- For use in the Century Arms MKE HK 93, 53 and 33 Translucent Polymer 30 round magazines (Like in the Photos)
- These blocks will convert a 30 round Century Arms MKE HK 93, 53, 33 Translucent Polymer magazine to hold only 10 or 15 rounds.
- NOTE: For use only in Century Arms MKE HK Translucent Polymer manufactured magazines. You will not use the factory retaining plate with this block to work this block will replace the factory retaining plate.
-Note: You will have to pull the end of the spring out just a little bit to allow for the block to be inserted into the spring. This can be done with a pair of pliers or a screwdriver.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $5.95 -
Century Arms AP51 and AP53 Magblock (.308)
Century Arms AP51 and AP53 Translucent Polymer Magblock
- For use in the Century Arms AP51 and AP53 Translucent Polymer 20 round magazines (Like in the Photos)
- These blocks will convert a 20 round Century Arms AP51 and AP53 Translucent Polymer magazine to hold only 10 or 15 rounds.
- NOTE: For use only in Century Arms AP51, AP53 Translucent Polymer manufactured magazines. You will use the factory retaining plate with this block to work.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Duramag 400 Legend Magblock (Hunting)
USGI Duramag, C-Products 400 Legend Magblock (2 or 5 Round Magazine Capacity Limiter)
- Fits USGI 5 or 10 round magazines made by C-Products/Duramag/ASC.
- This block will attach to the bottom of the spring.
- Will convert a 5 or 10 round (400 Legend) magazine to hold only 2 or 5 rounds for hunting.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
- Installs at the base of the magazine.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Duramag 350 Legend 2 Round Magazine (2 Round Magazine)
Duramag, C-Products 350 Legend 2 Round Blocked Magazine USGI Style
- This listing is for a Duramag 350 Legend magazine blocked to 2-rounds for hunting.
- Magaizne will come block, ready to go, with the Magblock limiter installed and blocking the magazine to 2-rounds for hunting.
- Magazine is made by Duramag and blocked by us.
- All factory parts including Duramag limiter along with the Magblock limiter installed.
- Magazine will come with a 5-round limiter and the Magblock branded 2-round limiter.
- Magazine can be converted back to a 5-round magazine or 10-round magazine in the off hunting season.
- Magazine is USGI style and will only work in firearms that accept USGI pattern style magazine.
This listing is for the sale of a blocked 2-round Duramag magazine chambered in 350 Legend. Limited supplies on hand.
$24.95 -
ASC - Duramag 6.8 SPC Magblock (Hunting)
ASC - Duramag USGI 6.8 SPC Magblock For Hunting (2 or 5 Round Limiter)
- For use in ASC - Duramag USGI 6.8 SPC 10 round magazines.
- These blocks will convert a 10 round magazine to hold only 2 or 5 rounds for hunting.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $6.49 -
Promag H&K USC Magblock 10/20 (.45)
H&K Promag USC Magblock Limiter for 20 Round Magazine (.45)
- For use in H&K Promag USC .45 20 round polymer magazines as pictured.
- These blocks will convert a 20 round magazine to hold only 10 or 15 rounds.
- This block allows you to use the factory Promag retaining plate with our block.
- This block is designed for the Promag HK USC 20-round magazine only.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
ASC - DURAMAG AR-15 6.5 Grendel 10/15 Magblock
ASC - Duramag AR-15 6.5 Grendel Magblock
- Converts the ASC brand and DURAMAG brand AR-15 6.5 Grendel 15 round magazine to 10, 5 or 2 rounds for hunting.
- Easy installation
- Does not affect reliability
- This block is constucted from our Gen M2 PMAG block cut down. We have options for 2, 5, or 10 round limiters.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.50 As low as: $5.95 -
Tippman Arms M4-22 Magblock 10/15 (.22WMR)
Tippmann Arms M4-22 .22WMR 10/15 Magblock 10 Round Limiter
- This block will convert 15 round Tippman Arms M4-22 .22WMR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne and allows you to use all factory parts of the magazine.
-This block has only been tested in the .22WMR 15-round magazine and might not work in the .22LR 15-round magazine.
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $6.30 -
DURAMAG AR-15 Magblock 10/20 (6.8mm)
Duramag 6.8 Remington SPC Magblock (5, 10, and 15 Round Limiter)
- Converts the DURAMAG AR-15 6.8 Remington SPC 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
- This block is constucted from our "New" Universal AK magazineblocks cut to #21.5
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $5.95 -
ProMag GSG-16 Magblock 10/22 (.22LR)
ProMag GSG-16, GSG-5, 522 .22LR 10/22 Magblock 10 & 15 Round Limiter
- This block will convert 22 round Promag GSG .22LR magazines into a 10 or 15 round magazine.
- Easy to install without damage to your magazines.
- Installs at the base of the magazne.
** This block will not work in factory GSG-5 .22LR magazines. It's only intended to work in the Promag GSG magazine.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.69 As low as: $5.95 -
Kel-Tec PLR-22, SU-22 Magblock 10/26 (.22LR)
Kel-Tec PLR-22 & SU-22 .22LR 10/26 Magblock 10 Round and 15 Round Limiter
- This block will convert 26 round Kel-Tec PLR-22, SU-22 .22LR magazines into a 10 or 15 round magazine.
- Easy to install without damage to your magazines. Installs at the base, using the stock locking plate.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Mission First Tactical AR-10 Magblock (.308)
Mission First Tactical Extreme Duty AR-10 Magazine Limiter for 20 Round Magazines
Fits the Mission First Tactical AR-10 .308/7.62x51mm magazines and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you to use the factory Mission First Tactical locking plate with our block to work correctly.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.50 As low as: $5.95 -
Duramag 350 Legend 2/5 Magblock (2 Round Limiter)
USGI Duramag, C-Products 350 Legend Magblock 2/5 (2 Round Magazine Capacity Limiter)
- Fits USGI 5 round magazines made by C-Products/Duramag.
- This block will attach to the bottom of the spring.
- Will convert a 5 round (350 Legend) magazine to hold only 2 rounds for hunting.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
-Installs at the base of the magazine.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 -
Duramag 350 Legend Magblock (2 & 5 Round Limiter)
USGI Duramag, C-Products 350 Legend Magblock 5/10 (5 Round Magazine Capacity Limiter)
- Fits USGI 10 round magazines made by C-Products/Duramag.
- This block will attach to the bottom of the spring.
- Will convert a 10 round (350 Legend) magazine to hold only 5 rounds.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
-Installs at the base of the magazine.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $6.49






