Canik

Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFx, Mete SFX, Mete SFT, Rival 18 Round Magazines

- Fits 18 round 9mm Factory Canik TP9 series magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

-We now offer a Canik Rival option. If you're running the Canik Rival aluminum +0 base plates, please select the Canik Rival option. If you choose this option, you will have the run the +0 plates only. 

Maglula UpLula Magazine Loader/Unloader - Fits 9mm-45 ACP 

• Takes One-Third the Time of Thumb Loading 

• Durable Polymer Construction

• Works with Single and Double Stack Magazines

Magblock 10 Round Limiter for Canik Taran Tactical Combat 18 Round Magazines

- Fits 18 round 9mm Factory Canik w/ +0 TTI extension series magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik magazines with a Taran Tactical +0 extension. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik Taran Tactical Combat 21 Round Magazines

- Fits 18 round 9mm Factory Canik w/ +3 TTI extension series magazines. 
- Easy installation under the follower and is held in place with spring tension.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik magazines with a Taran Tactical +3 extension. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik TP9SF Elite Compact 15 + 3 Round Magazines

- Fits 15 + 3 round 9mm Factory Canik TP9SF Elite, Combat, Mete SF, SF Pro Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9SF Elite, Combat, Mete SF, SF Pro Compact magazines that have the +3 adapter.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #18 showing in the notch to make this limiter. 

Magblock 10 Round Limiter for Promag Canik TP9 18 Round Magazines (ONLY)

- Fits 18 round 9mm Promag Canik TP9 magazines (This Block Will Not Work In Factory Canik TP9 Magazines). 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on Promag (Only) Canik TP9 magazines. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock 10 Round Limiter for Canik TP9SF Elite and METE MC9 Compact 15 Round Magazines

- Fits 15 round 9mm Factory Canik TP9 Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 Compact magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #10 showing in the notch to make this limiter. 

Magblock 10 Round Limiter for Canik TP9 Elite Sub-Comp 12 Round Magazines

- Fits 12 round 9mm Factory Canik TP9 Elite and Mete MC9 Subcompact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 Subcompact 12 round magazine.The block may need to be modified to work with magazines from other manufactures.

Magblock 10 Round Limiter for Canik TP9 17 Round Magazines

- Fits 17 round 9mm Factory Canik TP9 Subcompact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 Subcompact 17 round magazine.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #18 showing in the notch to make this limiter. 

Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFX, Mete SFT 20 Round Magazines

- Fits 20 round 9mm Factory Canik TP9, TP9SF, TP9SA, TP9SFx magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #23 showing in the notch to make this limiter. 

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-Size magazines from .380, 9mm, .40, 10mm and .45 magazines (might need modifcation for sub-compact magazines).

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal