Rifles

Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

AR10 Magblock 10/20

Fits ACS and C-Products .308/7.62x51mm 20 round magazines and will convert them to hold only 10 rounds.

 - No need to drill any holes. 

 - Load magazines on a closed bolt.

 - Easy to install. 

- No external magazine modifications. 

- May fit other brand AR 10 Magazines. 

Tapco Intrafuse AR-15 Magblock

- Magblock 10/30 MCL block for use in polymer Tapco Intrafuse AR-15 magazines.

- This block will convert a 30 round magazine to hold only 10 rounds. 

- The block replaces the lower Tapco locking plate.

NOTE: The Tapco follower must be modified like in the picture to hold all 10 rounds. 

Saiga 7.62 x 39 mm 10/30 Magblock

- Converts the Saiga polymer 7.62 x 39 mm 30 round magazine to 10 rounds.

- This block fits the 30 round Saiga SMG (Surefire Gun Mags) or Surefire Magazines. (May fit others, but not tested at this time)

- This block will replace the original magazine locking plate.

Heckler & Koch G36 Magblock

- Works with Magpul Pmag Magazines for the HK G36 only.

- 10/30 configuration (10 rounds in a 30 round body)

- Replaces the original locking plate

- Simple quick install. 

Limits 36 round Suomi magazines to 10 rounds.

New design does not replace the difficult to remove lower floor plate but instead rests on top of it.

The spring can also be epoxied to the block which allows for disassembly and cleaning.

Easy and simple way to make 10/36 Suomi magazines without damaging your hard to find magazine. 

Arsenal Bulgarian AK47 10/30 Magblock

This block fits the Arsenal 30 round AK47 magazines and will convert them to a 10 round magazine.

-Replaces the lower locking plate.

-Works on Arsenal Bulgarian 7.62x39mm AK magazines.

Note: This block is made from our Universal AK Kits cut to #38 using a square locking plate.

• Converts 9mm AR-15 32 round magazine to 10 rounds.
• This block will work with 9mm AR-15 magazines made by ProMag only.
• It replaces the lower floor plate. 
• The spring can also be epoxied to the block which allows for disassembly and cleaning. 
• We have a separate block available for UZI, C-Products, and ASC 32 round magazines. This one only fits Promag magazines.

Troy BattleMag 10/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.

- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 10 rounds.

- The optional shock absorbing floor plate will still function normally.

- Does not affect reliability.

- No increase in spring pressure or wear. 

(Note: This is a custom trimmed Pmag block)

Lancer L5 10/30 MCL (Magazine Capacity Limiter) for 30 round Lancer L5 Advanced WarFighter magazines in .223/5.56mm.

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 10 rounds.

- Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

- Does not affect reliability.

- No increase in spring pressure or wear. 

(Note: This is a custom modified Pmag block)

-This block will also work int he 30-round 300 Blackout Lancer magazines.

Lancer L5 10/20 MCL (Magazine Capacity Limiter) for 20 round Advanced Warfighter L5 magazines in .223/5.56mm.

- This new design block will sit on top of the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.—

- Only fits L5 Advanced Warfighter with slide on base. Will not fit older L5 magazines.

- Does not affect reliability.

- No increase in spring pressure or wear. 

- Uses a custom modified Pmag Block. 

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags.

Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

Magblock 10 Round Limiter for Century Arms OEM AP5 MP5 9mm 30 Round Magazines

- Fits 30 round 9mm Century Arms OEM MP5 style magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

NOTE: This block is designed for the Century Arms OEM MP5 Magazines and the factory H&K MP5 magazines.
 

HK33, C93 and V53 Magazine

- This block will convert 25 round "Made in Germany" Heckler & Koch magazines into a 10 round magazine.

- Works with factory HK .223/5.56mm magazines thats shown in the picture.

- This block allows you to use the factory locking plate.