Pistols

Mecgar Beretta 92FS Compact - M9 Magblock 10/18 (9mm) 10 & 15 Round Limiter

This Magblock fits the Mecgar made Beretta 92FS Compact/M9 18 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/18 Mecgar Beretta 92FS Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar made Beretta 92FS Compact - M9 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ProMag SIG P320 Magblock (9mm)

- Fits 32 round 9mm Sig P320 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter Kimber Mako CDS9 (9mm) 13 Round Magazines

- Fits 13 round 9mm CDS9 magazines
- Easy installation under the follower.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako CDS9 13 round magazine.

Magblock 10 Round Limiter For Kimber 2K11 13 Round .45 Magazines

- Fits 13 round .45 Factory Kimber 2K11 magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for FN Reflex 18 Round Magazines

- Fits 18 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Tanfoglio Compact Magblock 10 Round Limiter (10mm)

-This Magblock fits the Tanfoglio Compact 10mm 11 round magazines and will limit them to 10 rounds. 

-Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Tanfoglio Compact 10mm Magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

*This block is designed for the Tanfoglio Compact 10mm magazine (ONLY) and will not work on Mec-Gar magazines. 

Mecgar Beretta 92FS Compact - M9 Magblock 10/16 (9mm) 10 & 15 Round Limiter

This Magblock fits the Mecgar made Beretta 92FS Compact/M9 16 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/16 Mecgar Beretta 92FS Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar made Beretta 92FS Compact - M9 magazines (Only) as seen in the photos (with Bright Green Followers). Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Springfield Kuna 9mm 30 Round Magazines

- Fits 30 round 9mm Springfield Kuna factory magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
 

Taurus GX2 Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus GX2 13 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX2 magazines to 10 rounds. No external modification to the magazine is required

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta APX Centurion Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta APX Centurion 15 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Beretta APX Full-Size magazines. This Block Won't Fit The 15-Round Full-Size Magazine.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX Centurion magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for SAR K245 .45 14 Round Magazines

- Fits 14 round .45 SAR K245 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory SAR K245 14 Round.45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 140mm 20 Round 9mm Magazines

- Fits 20 round 9mm Factory Atlas Gunworks 140mm magazines. This block will not work in the 140mm magazine with the +1 extension. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

-If you are running competition followers in your 140mm 20rd magazine, then choose the competition follower options. This block will install at the base of the   magazine and not into the follower like our lockback designed block.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Mec-Gaer 2011 - Prodigy 18 Round 9mm Magazines

- Fits 18 round 9mm Mecgar 2011 - Prodigy 2011 magazines. 
- Easy installation into the base of the magazine (See pictures).
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Palmetto State Armory Five-Seven Compact Magblock Limiter

- Fits 21 round 5.7 mm Factory PSA Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.