Products
-
DURAMAG & SIG MCX SPEAR AR 7.62x39 10/28 Magblock
- New Design
- Converts the updated DURAMAG AR-15 7.62x39 28 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
This block will work in the Sig Sauer 7.62x39 MCX SPEER 28-round magaziens.
$7.49 As low as: $5.95 -
H&K Polymer MR556, HK416 10/30 Magblock (.556)
H&K AR-15 Polymer Magazine Magblock 10/30 Limiter
- For use in H&K MR556 and HK416 type 30 round polymer magazines as pictured.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
*This block is desinged for the polymer magazine only.
$6.95 As low as: $5.95 -
SUREFEED E2 USGI AR15 Magblock 10/30 (5.56)
Okay Industries Surefeed E2 Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines
- For use in Surefeed E2 USGI type 30 round magazines for the AR15/M16.
- These blocks will convert a 30 round magazine to hold only 10 rounds.$6.95 As low as: $5.95 -
Magblock Universal Pistol Limiter Kit (RETAIL 3 PACK)
Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal
$19.95 As low as: $18.95 -
H&K UMP Magblock 10/30 (9mm)
Heckler & Koch UMP 9mm Magblock 10/30
- Works with H&K UMP 9mm 30 rd Magazines as shown.
-Uses the factory locking plate.
- Simple quick installation.
-Tested on USA made UMP 9mm 30 round magazines.
$7.49 As low as: $6.49 -
Beretta ARX160 10/30 Magblock (.22)
Beretta ARX160 22LR 10/30 Magblock 10 Round Limiter
- This block will convert 30 round Beretta ARX160 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.49 As low as: $4.95 -
DURAMAG AR 7.62x39 10/20 MagBlock
- New Design
- Converts the updated DURAMAG AR-15 7.62x39 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
$7.49 As low as: $5.95 -
DURAMAG AR 6.5 Grendel 10/20 Magblock
Duramag 6.5 Grendel 10/20 Round Magblock
- Converts the DURAMAG AR-15 6.5 Grendel 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
- This block is constucted from our "New" Universal AK magazineblocks cut to #20.5
$7.49 As low as: $5.95 -
Magpul D60 10/60 Magblock (5.56)
Magblock 10/60 MCL (Magazine Capacity Limiter) for Magpul 60 round D60 Drum in .223/5.56mm.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Easy to install. See the video for instructions.$14.95 -
Ruger Mini 14 Magblock 10/30
Mini 14 Magblock 10/30 MCL (Magazine Capacity Limiter for Ruger Magazines
This block is for use in RUGER 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 10 rounds.
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
H&K MP5 10/25 Magblock (.22LR)
HK MP5 .22LR 10/25 Magblock 10 Round Limiter
- This block will convert 25 round HK MP5 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines. Installs at the base, using the stock locking plate.
$6.59 As low as: $5.95 -
American Tactical Schmeisser S60 Magblock 10 Round Limiter (10/60)
American Tactical Schmeisser S60 10/60 Magazine block Limiter
- This block will replace the lower spring attachment point or locking plate and convert a 60 round magazine to hold only 10 rounds.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Disclaimer Warning: The spring in this magazine is under a lot of pressure. When dissambling the magazine to insert the block, keep it pointed in a safe direction. Away from your face and eyes.
$12.95 As low as: $12.50 -
CZ Scorpion Evo 10/30 WINDOW & 3 Plus Magblock (9mm)
Magblock 10 Round Limiter for CZ Scorpion Evo Window (9mm) 30 Round Magazines
- Fits 30 round 9mm CZ Scorpion Evo Window magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.* This block is designed for the CZ factory Window and Blackout 3+ 30 Round magazine only. It will not work in the CZ Smoke Gray magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines.
CZ Evo Factory Smoke Gray 10/30 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-magblock-10-30-9mm.html
$6.95 As low as: $5.95 -
CZ P-09/P-10 Tactical Magblock 10/21 (9mm)
Magblock 10 Round Limiter for CZ P-09 (9mm) 21 Round Magazines
- Fits 21 round Tactical 9mm CZ P-09 magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
H&K 417 & MR762 Magblock 10/20 (.308)
H&K Magblock 10/20 Limiter
- For use in HK417 and HK MR762 type 20 round magazines as pictured.
- These blocks will convert a 20 round magazine to hold only 10 rounds.
$7.95 As low as: $5.95