Shopping Cart - $0.00

You have no items in your shopping cart.

 
Return to Previous Page

15 Round

15 Round magazine capacity limiters for our friends in New Jersey and Colorado.
Set Descending Direction

Grid List

  1. The Pmag LR20 15 Round limiter installs using the included screw. This limiter attaches to the original locking plate. No drilling is required. Easy installation.

    Pmag LR 20 Magblock 15/20 (.308) Gen 2

    Pmag LR20 Magblock 15/20 (15 rounds in a 20 round body)

    Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 15 rounds. Easy to install. Video instructions available under the FAQ Video link. Attaches to the original locking plate with an included screw. No need to drill any holes. 

    - Will NOT fit new Gen M3 Version. We are currently working on a new Magblock for those.

     - Dust covers still fit with 15 rounds loaded.

     - Load magazines on a closed bolt.

     - Easy to install. 

     - Includes required screw. 

    - No external magazine modifications. 

  2. Troy BattleMag 15/30 Magblock

    Troy BattleMag 15/30 Magblock

    Troy BattleMag 15/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.

    - This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 15 rounds.

    - The optional shock absorbing floor plate will still function normally.

    - Does not affect reliability.

    - No increase in spring pressure or wear. 

    (Note: This is a custom trimmed Pmag block)

  3. Sale
    USGI 10/30 MCL

    USGI MCL 15/30 Block

    Magblock 15/30 USGI MCL (Magazine Capacity Limiter)

    - For use in USGI type 30 round magazines.
    - These blocks will convert a 30 round magazine to hold only 15 rounds.
    - Works great Magpul anti-tilt followers.
    - Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

    -Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

    - See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
    We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended (Method #2). You can also convert them yourself using the pictures in the FAQ section as a guide. 

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  4. Sale
    Gen M3 Magblock 15/30

    GEN M3 Pmag MCL 15/30 Block ***NEW*** 15 Round Limiter

    15 Round Limiter for Gen M3 30 Round Pmags

    Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Magazines can be loaded with the bolt closed on many rifles.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  5. Sale
    Pmag MCL 15/20 Block for NJ and CO 15 Round Limiter (Gen 2)

    Pmag MCL 15/20 Block for NJ and CO 15 Round Limiter (Gen 2)

    Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  6. Sale
    Pmag MCL 15/30 Block for NJ and CO 15 Round Limiter (GEN 2)

    Pmag MCL 15/30 Block for NJ and CO 15 Round Limiter (GEN 2)

    Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

    - This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

    - Magazines can be loaded with the bolt closed.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Will also fit 30 round Emags.

    Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  7. 10 Round Magblock for IMI Defense 30 Round Magazines.

    IMI Defense Polymer 10/30 Magblock 10 and 15 Round Limiters

    10 and 15 Round Limiter for IMI Defense AR15 30 Round Polymer Magazines

    Magblock 10/30 and 15/30 MCL (Magazine Capacity Limiter) for IMI Defense 30 round polymer magazines in .223/5.56mm. 

    - This block will attach to the bottom of the spring, and sits on top of the original locking plate.

    - Easy conversion of 30 round magazine IMI magazines to hold only 10 rounds. Option to cut for 15 rounds available. Check box below.

    - Does not affect reliability.

    - No increase in spring pressure. 


  8. Sale
    Magblock Gen M3 15 Round Limiter for 20 Round Magazines.

    GEN M3 Pmag MCL 15/20 Block (15 Round Limiter)

    15 Round Limiter for Gen M3 20 Round Pmags

    Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Gen M3 (curved) Pmags in .223/5.56mm. 

    - This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

    - The Pmag dust covers will still fit when loaded.

    - Does not affect reliability.

    - No increase in spring pressure. 

    - Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.

    Regular Price: $6.25

    Special Price $4.95

    As low as: $3.95
  9. 15 Round Limiter for 30 Round Thermold Magazines. This easy to install limiter attaches to the bottom of the spring. The floor plate is then installed normally.

    Thermold 15/30 Magblock

    Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.

    - Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
    - Will convert a 30 round magazine to hold 15 rounds.
    Fits current production Thermold magazines as seen in the photos.
    - Easy install using all of the original magazine components. 
  10. Magblock 10 Round Limiter for the CAA 30 Round MAG-17 Magazine.

    CAA 15/30 Magblock 15 Round Limiter

    15 Round Limiter for CAA Indicative 30 Round Polymer Magazines

    Magblock 15/30 MCL (Magazine Capacity Limiter) for CAA 30 round polymer magazines in .223/5.56mm. 

    - This block will attach to the bottom of the spring, and sits on top of the original locking plate.
    - Easy conversion of 30 round CAA magazines to hold 15 rounds.
    - Does not affect reliability.
    - No increase in spring pressure. 


Set Descending Direction

Grid List