15 Round

Magblock 15/30 USGI MCL (Magazine Capacity Limiter)

- For use in USGI type 30 round magazines.
- These blocks will convert a 30 round magazine to hold only 15 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

- See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended (Method #2). You can also convert them yourself using the pictures in the FAQ section as a guide. 

Troy BattleMag 15/30 MCL (Magazine Capacity Limiter) for 30 round Troy BattleMags in .223/5.56mm.

- This block will sit on top of the Troy locking plate and convert a 30 round magazine to hold only 15 rounds.

- The optional shock absorbing floor plate will still function normally.

- Does not affect reliability.

- No increase in spring pressure or wear. 

(Note: This is a custom trimmed Pmag block)

15 Round Limiter for Gen M3 30 Round Pmags

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- The Pmag dust covers will still fit when loaded.

- Magazines can be loaded with the bolt closed on many rifles.

- Does not affect reliability.

- No increase in spring pressure. 

- Compatable with new Magpul Gen 3 Pmags only.  These will not work in original Pmags.'

- Attention: We now offer the option to use our block with the Magpul factory retaining plate with our block. The block will sit on top of the Magpul retaining plate and is cut differently than our standard Gen M3 10/30 magblock. If you're planning on not using the factory retaining plate then we have an options for you.

Magblock 15/20 MCL (Magazine Capacity Limiter) for Magpul 20 round Pmags in .223/5.56mm. (Gen 2 only)

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

Note: This is a trimmed down 10 round block to allow 15 rounds.  These fit Straight Body Gen 2 Pmags only.  Gen 3 limiters are available as a different product. 

Magblock 15/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Pmags in .223/5.56mm. (Gen 2)

- This block will replace the lower spring attachment point  or locking plate and convert a 30 round magazine to hold only 15 rounds.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- No increase in spring pressure. 

- Will also fit 30 round Emags.

Note: This is a trimmed down 10 round block to allow 15 rounds.  These will not work in Gen M3 Pmags. Gen M3 Pmag 15 round limiters are available as a different product. These fit Gen 2 Pmags only.  

Strike Industries Magblock 10/30 for AR15/M16 Magazines

- For use in Strike Industries 32 round magazines for the AR15/M16. 
- These blocks will convert a 32 round magazine to hold only 10 or 15 rounds.

-Magazine is marked 32 round but the magazine can easily accept 33 rounds. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

CMMG MK4 - AR-15 5.7x28 10/32 Magblock 10 Round Limiter

- This block will convert 32 round CMMG MK4/AR-15 5.7x28 magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.

 -This block is for CMMG Mk4 (See photos) 5.7x28 magazines in the pictures only. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiters for Patriot Ordnance Factory Tombstone and Phoenix 9mm 20 Round magazine

- This block fits the POF Tombstone - Phoenix 20 round 9mm magazines and will convert them to hold 10 or 15 rounds.

-Installs right under the follower and is held in place by spring tension.

- Made of super strong heat resistant polymer.

Magblock Limiters for Patriot Ordnance Factory Tombstone and Phoenix 9mm 35 Round magazine

- This block fits the POF Tombstone - Phoenix 35 round 9mm magazines and will convert them to hold 10 or 15 rounds.

-Installs right under the follower and is held in place by spring tension.

- Made of super strong heat resistant polymer.

ProMag GSG-16, GSG-5, 522 .22LR 10/22 Magblock 10 & 15 Round Limiter

- This block will convert 22 round Promag GSG .22LR magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

-Installs at the base of the magazne.

Kore Essentials B1 Coyote Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

Magblock Cement 8oz Large Bottle

Magblock Cement (8 oz bottle). Features:
- Starts to set in only 1-3 minutes. Can be built up.
- Handling strength: 5 minutes.
- Color: Black.
- Viscosity: paste.
- Full Strength: 12 hours 

Large 8 ounce bottle 

Magblock 10/30 limiter for FAB Defense 5.56x45/.223 mm AR Magazines only.

- Tested and designed for FAB Defense AR-15 magazines.
- These blocks will convert a 30 round 5.56x45 mm magazine to hold only 10 rounds with the use of the provided adapter.

CMMG MK4 - AR-15 .22LR 10/25 Magblock 10 Round Limiter

- This block will convert 25 round CMMG MK4/AR-15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Allows use of factory locking plate and base plate.

 -This block is for CMMG Mk4 (See photos) .22LR magazines in the pictures only. Will not work in Clear CMMG or USGI style .22LR magazines.