10 Round
-
PUFGUN AK/Vepr .223 Magblock 10/30 (5.56x45)
PufGun AK-74 Vepr .223 Magblock for 5.45x45mm 30 round magazines
- This AK-74 Vepr block fits 30 round polymer PufGun marked 5.45x45 mm magazines and will convert them to hold only 10 rounds.
- This prevents the block making noise and epoxy can be added at this point to make it permanent.
IMPORTANT: This block is designed for the AK Vepr .223 marked PufGun magazines only. The block has a special adapter fixed to the bottom of the block,
so that you can use the stock locking plate with no issues. These blocks are designed to fit the PufGun Russian made magazines only.
$7.49 As low as: $5.95 -
H&K Gen2 PM Stanag 10/30 Magblock (5.56x45)
H&K AR-15 Polymer Gen2 PM Stanag Magazine Magblock 10/30 Limiter
- For use in polymer 30 round Gen2 PM Stanag magazines as pictured.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
*This block is desinged for the polymer magazine in the pictures only.
*This block allows you to use your factory locking plate. To use this block, you will need to bend the bottom spring end just a little bit, so that the magblock can sit in place.
$6.95 As low as: $6.50 -
AC-Unity AK556/.223 Magblock 10/30 (5.56)
AC-Unity AK-74 556/.223 Magblock for 5.45x45mm 30 round magazines
- This AK-74 block fits 30 round polymer AC-Unity marked 5.45x45 mm magazines and will convert them to hold only 10 rounds.
$6.95 As low as: $5.95 -
Tippman Arms M4-22 Magblock Limiter
Tippmann Arms M4-22 .22LR 10/22 Magblock 10 and 15 Round Limiter
- This block will convert 25 round Tippman Arms M4-22 .22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
-Installs at the base of the magazne and allows you to use all factory parts of the magazine.
$6.59 As low as: $6.30 -
Lancer L5 300 BlackOut 10/20 Magblock
Lancer L5 10/20 MCL (Magazine Capacity Limiter) for 20 round Advanced Warfighter L5 magazines in 300 Blackout
- This new design block will sit on top of the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.—
- Only fits L5 Advanced Warfighter with slide on base.
- Does not affect reliability.
- No increase in spring pressure or wear.
- Uses a custom modified Pmag Block.
$6.59 As low as: $5.95 -
Sale
Steyr Aug PMag 10/30 Magblock Limiter
Magblock 10/30 MCL (Magazine Capacity Limiter) for Magpul 30 round Steyr Aug Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
Regular Price: $5.95
Special Price $4.95
-
HEXMAG .223 /5.56mm AR15 10/20 Magblock
New Hexmag AR-15 Magblock 10/20 Magblock
- Magblock 10/20 MCL block for use in polymer Hexmag AR-15 magazines.
- This block will convert a 20 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.95 -
KRISS VECTOR 22LR 10/30 Magblock
Kriss Vector 22LR 10/30 Magblock 10 & 15 Round Limiter
- This block will convert 30 round Kriss Vector Extended Magazine 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.95 As low as: $5.49 -
FAB Defense Ultimag AR15 Magblock 10/30 Limiter
Magblock 10/30 limiter for FAB Defense 5.56x45/.223 mm AR Magazines only.
- Tested and designed for FAB Defense AR-15 magazines.
- These blocks will convert a 30 round 5.56x45 mm magazine to hold only 10 rounds with the use of the provided adapter.$6.50 As low as: $4.95 -
Thermold 10/15 Magblock Limiter
Magblock 10 Round Magazine Capacity Limiter for Thermold 15 and 20 round AR-15/M16 Magazines.
- Fits Thermold 20 round and 15 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.- Will convert both a 20 or 15 round magazine to hold only 10 rounds.
- Only fits current production Thermold magazines. Has not been tested on older versions. Some modification may be needed for older production magazines.
- The Thermold 15 and 20 round magazines use the same body size and differ only by a slight internal modification. The same limiter will limit both magazines to 10 rounds.$6.50 As low as: $5.95 -
HEXMAG .223 /5.56mm AR15 10/30 Magblock
Hexmag AR-15 Magblock 10/30
- Magblock 10/30 MCL block for use in polymer Hexmag AR-15 magazines.
- This block will convert a 30 round magazine to hold only 10 rounds.
- Uses the original Hexmag locking plates.
$6.50 As low as: $5.95 -
MSAR 10/30 Magblock 10 Round Limiter
10 Round Limiter for MSAR 30 Round Polymer Magazines
Magblock 10/30 MCL (Magazine Capacity Limiter) for MSAR 30 round polymer magazines in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 30 round magazine to hold only 10 rounds.
- Customized base of the Magblock includes one locking point.
- Does not affect reliability.
- No increase in spring pressure.
$6.59 As low as: $5.95 -
Gen 3 Pmag 10/40 Magblock
10 Round Limiter for Gen M3 40 Round Pmags
Magblock 10/40 MCL (Magazine Capacity Limiter) for Magpul 40 round Gen M3 Pmags in .223/5.56mm.
- This block will replace the lower spring attachment point or locking plate and convert a 40 round magazine to hold only 10 rounds.
- Includes 2 part limiter for extra height.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- Compatible with the 40 round Magpul Gen 3 Pmags only.
$7.49 As low as: $5.95 -
Magblock Epoxy Cement
Magblock Cement
Magblock Cement (15 ml bottle with applicator tip). Will work for a few rifle or up to 15+ pistol limiters depending on amount used. Features:
- Starts to set in only 1-3 minutes. Can be built up.
- Handling strength: 5 minutes.
- Color: Black.
- Viscosity: paste.
- Full Strength: 12 hours 15 ml bottle$3.95 -
5.45x39 AR15 Magblock 10/30 Limiter
Magblock 10/30 limiter for 5.45x39 mm AR Magazines only.
- Tested in C-Products and ACS magazines.
- These blocks will convert a 30 round 5.45x39 mm magazine to hold only 10 rounds.
$5.95 As low as: $4.50