Rifles

Magblock for Riley Defense RAK-308 M77 .308 20 Round Magazines. 10 and 15 Round Limiters.

Fits Riley Defense RAK308-C .308/7.62x51mm 20 round magazines made by Riley Defense.

- Easy to install in seconds.
- Allows the use of the stock locking plate.
- No external magazine modifications.
- Select 10 or 15 round limiter below. 

- Tested in Riley Defense RAK308-C M77 magazines made by Riley Defense.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock for Chinese Norinco AKS - AK-47 (.223) Magazines.

- This block fits the Norinco 30 round AKS - AK47 magazines in .223/5.56 and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK

- This block is designed for the Norinco AKS-AK-47 .223/556 magazines only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 ASC - Duramag AR-15 6.5 Grendel Magblock

• Converts the ASC brand and DURAMAG brand AR-15 6.5 Grendel 15 round magazine to 10, 5 or 2 rounds for hunting.
• Easy installation 
• Does not affect reliability 
• This block is constucted from our Gen M2 PMAG block cut down. We have options for 2, 5, or 10 round limiters.

M+M INDUSTRIES AK-47 10/30 Magblock Limiter

This block fits the M+M Industries 30 round AK47 magazines and will convert them to a 10 or 15 round magazine.

-Replaces the lower locking plate.

-Works on M+M Industries 7.62x39mm AK magazines shown in the photos.

Note: This block is made from our Universal AK Kits cut to #38 using a square locking plate.

5 Round Limiter for SR-25 Mod2 10 Round Amend2 Magazines

Magblock (Magazine Capacity Limiter) for Amend2 10 round in .308/7.62x51. 

- This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

-Note: You will use the factory locking plate/retaining plate with our magblock. See photos for details.

Century Arms MKE HK 93, 53 and 33 Translucent Polymer Magblock 

- For use in the Century Arms MKE HK 93, 53 and 33 Translucent Polymer 30 round magazines (Like in the Photos)

- These blocks will convert a 30 round Century Arms MKE HK 93, 53, 33 Translucent Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in Century Arms MKE HK Translucent Polymer manufactured magazines. You will not use the factory retaining plate with this block to work this block will replace the factory retaining plate.

-Note: You will have to pull the end of the spring out just a little bit to allow for the block to be inserted into the spring. This can be done with a pair of pliers or a screwdriver.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Bulgarian Tanker AK47 10 and 15 Round Magblock

This block fits the Bulgarian Tanker 20 round AK47 magazines and will convert them to a 10 or 15 round magazine.

-Replaces the lower locking plate.

-Works on Bulgarian Polymer Tanker 20 round magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magazineblock "RESIST" Trucker Snap-Back Hat

- Snap-Back design perfect for all head sizes

- Trucker style is perfect for spring, summer and fall time wheather

- Great to show off your "Resist" pride 

- Offering in Black with red logo and FDE base with OD green front

Magblock Limiter for Russian PPSh-41 35 Round Magazines (7.62x25 Tokarev)

- Fits Russian PPSh-41 35 round magazines chambered in 7.62x25 Tokarev.

- Easy installation under the follower and stays in place with spring tension - Limits the magazine to 10 or 15 rounds of 7.62 Tokarev.

- Held in place with spring tension or can be epoxied for a permanent modification. 

- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*To ensure proper Fitment of our block, your magazine should look like the one in the pictures.

AMEND2 SCAR 17 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit the Amend2 (Only) 7.62x51mm NATO/.308 for the SCAR 17 Magazines made by Amend2.

- The block installs at the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your Amend2 SCAR 17 polymer magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

- This block is designed and tested for the Amend2 SCAR 17 magazine only and won't work in factory FN SCAR 17 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 & 15 Round Limiter Overwatch Precision Mod2 MP5 9mm 32 Round Magazines

- Fits 32 round 9mm Overwatch Precision Mod2 MP5 style magazines.
- Limits the magazine to 10 or 15 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

NOTE: This block is designed for the Overwatch Preceision Mod2 Magazines MP5 Magazines Only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
 

USGI Duramag, C-Products 7.62x39 AR-15 Magblock 5/10 (2 and 5 Round Magazine Capacity Limiter)

- Fits USGI 10 round magazines made by C-Products/Duramag. 
- This block will attach to the bottom of the spring.
- Will convert a 10 round (7.362x39) magazine to hold only 5 or 2 rounds.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure. 
-Installs at the base of the magazine.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

SDS Imports AR-15 Polymer 10/30 Magblock 

- For use in the SDS Imports AR-15 Polymer 30 round magazines (Like in the Photos)

- These blocks will convert a 30 round SDS Imports AR-15 Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in SDS Imports AR-15 Polymer manufactured factory magazines. You will use the factory retaining plate with this block to work.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Kriss Vector Gen 2 10mm 10/33 Magblock 10 & 15 Round Limiter

- This block will convert 33 round Kriss Vector Extended Magazine 10mm magazines into a 10 round magazine.

- Easy to install without damage to your magazines. Block installs into the follower, like other Glock blocks, and stays in place with spring tension.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.