Rifles

10 Round Limiter for Gen M3 40 Round Pmags

Magblock 10/40 MCL (Magazine Capacity Limiter) for Magpul 40 round Gen M3 Pmags in .223/5.56mm. 

- This block will replace the lower spring attachment point or locking plate and convert a 40 round magazine to hold only 10 rounds.

- Includes 2 part limiter for extra height.

- Magazines can be loaded with the bolt closed.

- Does not affect reliability.

- Compatible with the 40 round Magpul Gen 3 Pmags only.

Magblock 10 Round Limiter for Sig MPX 9mm 30 Round Magazines

- Fits 30 round 9mm Sig MPX factory magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. (Follower insert requires epoxy or silicone to securely hold in place).
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
 

ATTENTION: This block will not work on the new Sig MPX magazines. See picture #2 for an example of the new style Sig MPX magazine.

 

HK33 and C93

- This block will convert 20 round Promag HK magazines into a 10 round magazine.

- Works with Promag .223/5.56mm magazines.

- Replaces factory locking plate 

This block will work with 25 round 9mm UZI and Metalform magazines to make a 10 round magazine. It replaces the floor plate locking tab. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

PS90 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit original 5.7x28mm PS90 Magazines made by FNH and some aftermarket magazines as well.

- The block attaches to the bottom of the magazine spring and will convert 50 round magazines to hold only 10 rounds.

- No modifications to your expensive FN PS90 magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

*PATENT PENDING*

 

MAGBLOCK UNIVERSAL AK LIMITER KIT

ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.

Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15  rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
- Pre notched cut outs in the most common lengths for easy cutting.
- Works on many military spec steel AK47 magazines.

Don't forget to check out our new upgrade stainless steel AK springs for polymer and steel magazines here or add below to your order. 

This block will work with 32 round 9mm UZI and Metalform magazines to make a 10 round magazine. It replaces the lower floor plate. The spring can also be epoxied to the block which allows for dis-assembly and cleaning, or epoxy the floor plate closed for a more secure modification.

Magblock 10/30 USGI MCL (Magazine Capacity Limiter) for AR15/M16 Magazines

- For use in USGI type 30 round magazines for the AR15/M16. 
- Will also fit SCAR 16 GI Magazines.
- These blocks will convert a 30 round magazine to hold only 10 rounds.
- Works great Magpul anti-tilt followers.
- Fits Brownells, C-Products, ACS, D&H, NHMTG, Colt, and most other metal .223/5.56 mm 30 round magazines.

-Original military style green USGI followers may need to be trimmed or replaced to work properly. If your followers have a green spike in the middle this will have to be cut down to work properly. Please see the training video section or the other photo here for instructions on how to do this. The link to the FAQ section also provides more information. 

- See our FAQ section for details about using with Magpul Ranger Plates and L-Plates. http://www.magazineblocks.com/magento/faq 
We have found two different methods that can be used for USGI Ranger Plates and L-Plates. We have added custom options below to buy with the bottom locking tab still in place (Method #1), or converted for use with both parts of the Ranger/L-plate as Magpul intended. You can also convert them yourself using the pictures in the FAQ section as a guide. 

Magblock 10/20 USGI MCL (Magazine Capacity Limiter)

Magblock 10/20 MCL (Magazine Capacity Limiter) for use in most USGI 20 round magazines in .223/5.56mm.

-Will convert a 20 round magazine to hold only 10 rounds.

-Magazines can be loaded with the bolt closed. 

You must specify the type or brand of magazine when ordering. for example Colt 20 round magazines use a modified block, but are straight 20 magazine bodies. Magazines with a slightly curved body (such as some C-Products) use different block and must be specified when ordering.

- See our FAQ section for details about using with Magpul Ranger Plates. http://www.magazineblocks.com/magento/faq or select the custom option below to buy with the bottom locking tab still in place. 

Galil and Golani 10 Round Limiter

This block fits the steel 35 round magazines for Galil and Golani rifles and convert them to hold only 10 rounds.

New design ncludes a lower magazine spring attachment point to make installation easier. This makes a convenient epoxy location.

*(FYI some blocks may be marked 10/30. These are really 10/35 limiters)

Magblock for Tapco AK47 10/30, 10/20. 15/30 Limiter  (7.62x39mm)

- This block fits the Tapco 30 round AK47 magazines 7.62x39mm and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

- Also marked where to cut to make 10 round blocks for the 20 round Tapco AK magazines.

- Now marked where to cut for a 15 round limiter for 30 round Tapco Magazines. 

Pmag LR20 Magblock 10/20 GEN 2

Fits the Magpul LR20 .308/7.62x51mm Pmags (All older versions) and will convert them to hold only 10 rounds. Easy to install. You will not use the original factory locking plate with this block.

- Will NOT fit new Gen M3 Version. Fits all prior versions.

 - Dust covers still fit with 10 rounds loaded.

 - Load magazines on a closed bolt.

 - Easy to install. 

 - Includes required screw. 

- No external magazine modifications. 

10 Block Bulk Pack

• 10 block bulk pack. Includes ONLY the following: Pmag M2/MOE 10/30, Pmag M2/MOE 10/20, USGI 10/30, and USGI 10/20, HK G36, XD/XDm 9 and .40 Pistol blocks, and Glock 9 and .40 Pistol blocks, excluding the Glock 10/33. 
• You MUST specify the quantity and type of each block below. Please be specific. 

Excludes 10/20 Colt blocks and Gen 3 blocks