Rifles
-
E-Lander Elander 10/30 Magblock 10 Round Limiter
E-Lander Magblock 10/30 Magazine Capacity Limiter (10 Round Limiter)
- For use in E-Lander 30 round magazines.
- These blocks will convert a 30 round E-Lander magazine to hold only 10 rounds.
- Replaces the E-Lander locking plate and has a built in floor plate lock.- These can be used with USGI Ranger Plates and L-Plates. The bottom of the limiter can be modified for this and the block shortened by 2mm to allow room for the Magpul locking plate. We offer this as an option. You can also do it yourself following the instuctions found in the FAQ section here: http://www.magazineblocks.com/magento/faq FYI: Once the block is modified for use with a Ranger Plate or L-Plate the block can not be used without one of these products in place ot it will hold >10 rounds.
$5.95 As low as: $4.50 -
Thermold 15/30 Magblock
Magblock 15/30 MCL (15 Round Magazine Capacity Limiter) for Thermold 30 round AR-15/M16 Magazines.
- Fits Thermold 30 round black Zytel Nylon magazines in 5.56 mm, 223 Cal.
- Will convert a 30 round magazine to hold 15 rounds.
- Fits current production Thermold magazines as seen in the photos.
- Easy install using all of the original magazine components.$5.95 As low as: $5.50 -
Mini 14 MCL 10/30 Block (Tapco)
Mini 14 Magblock 10/30 MCL - Magazine Capacity Limiter for Tapco 30 Round .223/5.56mm Magazines)
- Fits new Tapco 30 round magazines for the Ruger Mini 14.
- These blocks will attach to the bottom of the spring.
- Converts a 30 round magazine to hold only 10 rounds.
*Only for use in TAPCO Mini 14 magazines.$6.95 As low as: $5.95 -
Sale
USGI "Curved Body" 5/20 Magblock (5 Round Limiter)
USGI "Curved Body" Magblock 5/20 (5 Round Magazine Capacity Limiter) .223/5.56mm and .300BLK
- Fits USGI 20 round "Curved body" magazines made by C-Products and ACS.
- This block will attach to the bottom of the spring.
- Will convert a 20 round magazine to hold only 5 rounds.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
- Works with .223, 5.56mm, and .300BLK -
USGI .458 SOCOM 5/20 Magblock (5 Round Limiter)
USGI .458 SOCOM Magblock 5/20 (5 Round Magazine Capacity Limiter)
- Fits USGI 20 round "Curved body" magazines made by C-Products and ACS when used with .458 SOCOM adapter.
- This block will attach to the bottom of the spring.
- Will convert a 20 round (.223/5.56) magazine to hold only 5 rounds of .458 SOCOM.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
ONLY FITS PICTURED MAGAZINES USED WITH FOLLOWER ADAPTER AND .458 SOCOM AMMUNITION.$6.50 As low as: $5.95 -
AR10 ArmaLite Magblock 10/25 (.308)
Magblock for ArmaLite AR10 25 Round Magazines. 10 and 15 Round Limiters.
Fits ArmaLite AR10 .308/7.62x51mm 25 round magazines and will convert them to hold only 10 or 15 rounds.
- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications.
- Select 10 or 15 round limiter below.$6.95 As low as: $5.95 -
ProMag DPMS LR-308 Magblock 10/20
Magblock for ProMag DPMS LR-308 20 Round Magazines. 10 or 15 Round Limiters available.
Fits Promag DPMS LR-308 20 round magazines in .308/7.62x51mm and will convert them to hold only 10 or 15 rounds.- Easy to install in seconds.
- No need to drill any holes.
- Load magazines on a closed bolt in most rifles.
- No external magazine modifications.$6.59 As low as: $5.49 -
Ruger Mini 14 Magblock 10/20
Mini 14 Magblock 10/20 MCL (Magazine Capacity Limiter for Ruger Magazines
This block is for use in RUGER 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 10 or 15 rounds. (Select option below).
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
H&K416 22LR 10/30 Magblock
HK416 22LR 10/30 Magblock 10 Round Limiter
- This block will convert 30 round HK 416 22LR magazines into a 10 round magazine.
- Easy to install without damage to your magazines.
$6.95 As low as: $5.49 -
Promag AK-47 Magblock 10/30 (7.62)
Magblock for Promag and some Bulgarian AK47 (7.62x39mm) Magazines.
- This block fits the Promag and Bulgarian (Plastic follower only) 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- Note: This is a modified Tapco limiter so will be marked with Tapco markings. The cut down lines for other sizes are not accurate. Only for use with 30 round magazines.
$7.49 As low as: $5.95 -
PMAG AK47 10/30 Magblock (7.62)
Magblock 10 and 15 Round Limiter for Magpul 30 Round AK-47 Pmag (7.62x39mm)
This block fits the new Magpul 30 round AK47 magazines and will convert them to hold 10 rounds.
- Replaces the lower locking plate for an easy and secure install.
- Built in spring catch holds the limiter securely in place and prevents noise.
- Also available as a 5 round limiter for 20 round Pmags and a 15 round option is available.
- Patented design not available anywhere else.*Made using out new Universal AK Limiter. If using the universal AK kit to make this limiter, cut so #39 shows in the indicator notch and use the Pmag lock insert. The block sold here come pre-cut for this size.
Upgrade Stainless Steel AK replacement springs available for Pmag AK Magazines! Add to order below for a discount. See our upgrade springs here: LINK$7.49 As low as: $5.95 -
VZ58 Magblock 10/30 Limiter
Magblock for VZ 58 (7.62x39mm) Magazines.
- This block fits the VZ.58 30 round magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- These are marked as an "AK47" limiter but is modified to work in the VZ.58. I know these rifles don't usually share any parts :)
-NOTE: Only fits the type of VZ.58 magazine shown in the photos. These will not work if your magazine internals are significantly different than those pictured.
$7.49 As low as: $6.49 -
GEN 3 PMAG 5/30 Magblock (5 Round Limiter)
Magblock 5/30 (5 Round Magazine Capacity Limiter)
This block is for use in Magpul 30 round Pmags. Both Gen 2 and M3. These blocks will replace the lower spring attachment point (locking plate) and convert a 30 round magazine to hold only 5 rounds where required for hunting. Note: This is a custom made limiter, not like the other injection molded Pmag limiters.
$6.50 As low as: $5.50 -
M1_Carbine 5/15 Magblock (5 Round Limiter)
This easy to install 5 round magblock will limit a standard 15 round M1 carbine magazine. It simply slides onto the top of the spring right under the follower. Marked on the block for correct installation. No external modifications are needed. this block will limit the magazine capacity to 5 rounds, but still allow normal magazine function and bolt operation.$6.50 As low as: $5.95 -
LaRue Tactical 10/20 Magblock (.308)
Magblock for the LaRue Tactical 20 round AR-10 Magazines. Made of heat and impact resistant fiber reinforced polymer. Won't deform even in the most hostile environments. This is the same as the M14 Limiter. Will be a tight fit in the base. Thanks to EBR Works for this compatibility update. Check them out at for compliance work: http://www.ebrwebstore.com/middleman-ffl-services
$6.50 As low as: $5.95