Rifles

LANCER NGSW XM5 / MCX-SPEAR 6.8X51MM - 277 SIG FURY MAGBLOCK

- This block will replace the lower spring attachment point  or locking plate and convert a 20 round magazine to hold only 10 rounds.
- Only fits Lancer MCX-Spear 6.8x51mm 20-round magazines.
- Does not affect reliability.
- No increase in spring pressure or wear. 
Note: This is a custom modified Pmag block and will replace the original base. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

MAGBLOCK UNIVERSAL AK LIMITER KIT (Retail 3 Pack)

ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.

Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15  rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.

- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
- Pre notched cut outs in the most common lengths for easy cutting.
- Works on many military spec steel AK47 magazines.

Don't forget to check out our new upgrade stainless steel AK springs for polymer and steel magazines here or add below to your order. 

ASC USGI 6.5 Grendel, 6mm ARCMagblock 5/10 MCL (Magazine Capacity Limiter)

- For use in ASC USGI 6.5 Grendel & 6mm ARC 10 round magazines. 
- These blocks will convert a 10 round magazine to hold only 5 or 2 rounds.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

5 Round Limiter for SR-25 Mod2 10 Round Amend2 Magazines

Magblock (Magazine Capacity Limiter) for Amend2 10 round in .308/7.62x51. 

- This block will replace the lower spring attachment point  or locking plate and convert a 10 round magazine to hold only 5 rounds.

- Does not affect reliability.

- No increase in spring pressure. 

-Note: You will use the factory locking plate/retaining plate with our magblock. See photos for details.

Palmetto State Armory AK-103 Magblock Limiter (7.62x39mm)

- This block fits the PSA AK-103 30 round AK47 magazines 7.62x39mm and will convert them to a 10 or 15 round magazine.

- Replaces the lower locking plate for an easy and secure install.

- This block is made from our Universal AK Kit cut to #39 

WILSON COMBAT AR-15 (5.56x45) 10 and 15 Round Magblock Limiter

This block fits the Wilson Combat AR-15 30 round 5.56x45 magazines and will convert them to a 10 or 15 round magazine.

-This block is designed to use the factory retaining plate with our block.

-Works on Wilson Combat 30 round AR-15  5.56x45 magazine shown in the photos.

Note: This block is made from a cut down Gen2 PMag block.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield - Checkmate M14/M1A 5 Round Limiter For 10 Round Magazine For Hunting

- Easiest and quickest way to make a 10 round M14 - M1A magazine into a 5 round magazine for hunting.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 5 rounds installed.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Century Arms AP51 and AP53 Translucent Polymer Magblock 

- For use in the Century Arms AP51 and AP53 Translucent Polymer 20 round magazines (Like in the Photos)

- These blocks will convert a 20 round Century Arms AP51 and AP53 Translucent Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in Century Arms AP51, AP53 Translucent Polymer manufactured magazines. You will use the factory retaining plate with this block to work.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Century Arms MKE HK 93, 53 and 33 Translucent Polymer Magblock 

- For use in the Century Arms MKE HK 93, 53 and 33 Translucent Polymer 30 round magazines (Like in the Photos)

- These blocks will convert a 30 round Century Arms MKE HK 93, 53, 33 Translucent Polymer magazine to hold only 10 or 15 rounds.

- NOTE: For use only in Century Arms MKE HK Translucent Polymer manufactured magazines. You will not use the factory retaining plate with this block to work this block will replace the factory retaining plate.

-Note: You will have to pull the end of the spring out just a little bit to allow for the block to be inserted into the spring. This can be done with a pair of pliers or a screwdriver.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Bulgarian Tanker AK47 10 and 15 Round Magblock

This block fits the Bulgarian Tanker 20 round AK47 magazines and will convert them to a 10 or 15 round magazine.

-Replaces the lower locking plate.

-Works on Bulgarian Polymer Tanker 20 round magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magazineblock "RESIST" Trucker Snap-Back Hat

- Snap-Back design perfect for all head sizes

- Trucker style is perfect for spring, summer and fall time wheather

- Great to show off your "Resist" pride 

- Offering in Black with red logo and FDE base with OD green front

Magblock Limiter for Russian PPSh-41 35 Round Magazines (7.62x25 Tokarev)

- Fits Russian PPSh-41 35 round magazines chambered in 7.62x25 Tokarev.

- Easy installation under the follower and stays in place with spring tension - Limits the magazine to 10 or 15 rounds of 7.62 Tokarev.

- Held in place with spring tension or can be epoxied for a permanent modification. 

- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*To ensure proper Fitment of our block, your magazine should look like the one in the pictures.

AMEND2 SCAR 17 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit the Amend2 (Only) 7.62x51mm NATO/.308 for the SCAR 17 Magazines made by Amend2.

- The block installs at the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your Amend2 SCAR 17 polymer magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

- This block is designed and tested for the Amend2 SCAR 17 magazine only and won't work in factory FN SCAR 17 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 & 15 Round Limiter Overwatch Precision Mod2 MP5 9mm 32 Round Magazines

- Fits 32 round 9mm Overwatch Precision Mod2 MP5 style magazines.
- Limits the magazine to 10 or 15 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

NOTE: This block is designed for the Overwatch Preceision Mod2 Magazines MP5 Magazines Only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.