Rifles
-
Century Arms AP51 and AP53 Magblock (.308)
Century Arms AP51 and AP53 Translucent Polymer Magblock
- For use in the Century Arms AP51 and AP53 Translucent Polymer 20 round magazines (Like in the Photos)
- These blocks will convert a 20 round Century Arms AP51 and AP53 Translucent Polymer magazine to hold only 10 or 15 rounds.
- NOTE: For use only in Century Arms AP51, AP53 Translucent Polymer manufactured magazines. You will use the factory retaining plate with this block to work.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Zastava Metal AK47 10/30 Magblock (7.62x39)
Magblock for Zastava Metal AK47 (7.62x39mm) Magazines.
- This block fits the Zastava Metal USA Made 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
KCI AK-47 10/40 Magblock (7.62)
Magblock for KCI Gen 2 AK47 (7.62x39mm) Magazines.
- This block fits the KCI Gen 2 40 round AK47 magazines in 7.62x39mm and will convert them to a 10 or 15 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- You must use the 2-piece adapter with our block to function correctly.
*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$9.95 As low as: $7.95 -
H&K UMP Magblock 10/30 (10mm)
Heckler & Koch UMP 10mm/40 Magblock
- Works with H&K UMP 10mm - 40S&W 30rd Magazines as shown.
- 10 and 15 round options available below. Also a 5 round options for hunting
- This block will replace the factory locking plate
- Simple quick installation.
- With our block it allows for the full power of the spring to be used.
-This block has only been tested in the German made UMP 10mm - .40 magazines.
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $6.49 -
SIG MCX-SPEAR Magblock 10/20 (6.8x51)
SIG SAUER MCX-SPEAR 6.8X51, 7.62x51, 6.5 CREED, 277 FURY Magblock Limiter
- This block will convert a 20 round magazine to hold only 10 rounds.
- Only fits the "New" Sig Sauer made MCX-Spear 6.8x51mm, 7.62 nato, 277 Fury 20-round magazines.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and allows for use of the factory locking plate. This block will not work in the Lancer MCX-Spear 20-round magazines. If you need a magblock for the Lancer MCX-Spear 20-round magazine check in the related products under this posting.*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Valmet M76, M78 Magblock 10/20 (.308)
Magblock for Valmet M76, M78 - AK-47 (.308) Magazines.
- This block fits the Valmet M76. M78 type 20 round magazines in .308 and will convert them to a 10 round magazine.
- This block allows for the use of the factory retaining plate.
- This block is designed for the Valmet M76, M78 type 20-round .308 magazines only.
*This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $4.95 -
Valmet M76 Magblock 10/15 (.223)
Magblock for Valmet M71, M76, M82, M88 - AK-47 (.223) Magazines.
- This block fits the Valmet M71 type 15 round magazines in .223/5.56 and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
- This block is designed for the Valmet M71 type 15-round .223/556 magazines only.
*This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $5.95 -
DURAMAG AR-15 Magblock 10/20 (6.8mm)
Duramag 6.8 Remington SPC Magblock (5, 10, and 15 Round Limiter)
- Converts the DURAMAG AR-15 6.8 Remington SPC 20 round magazine to 10 rounds.
- Easy installation
- Does not affect reliability
- This block is constucted from our "New" Universal AK magazineblocks cut to #21.5
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.49 As low as: $5.95 -
SIG MCX-SPEAR Magblock 10/20 (.308)
SIG MCX SPEAR Pmag LR20 Magblock GEN M3 Magazine Capacity Limiters (5, 10, and 15 Round Limiters Available)
Fits the Magpul LR20 .308/7.62x51mm Pmags and will convert them to hold only 5, 10, or 15 rounds. Select desired size below. Easy to install.
- Will NOT fit older version magazines. Gen M3 Only.
- Dust covers still fit with 10 rounds loaded.
- Load magazines on a closed bolt in most rifles.
- Easy to install.
- No external magazine modifications.
-This block requires you use the factory Magpul locking plate with our block (See picture 1 and 2).
-The factory Sig Sauer MCX-Spear 7.62x51 comes with the Magpul Gen M3 LR308 20-round magazine. Make sure this is the magazine you're trying to block. This block has only been tested on the magazine in the photos.
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.50 As low as: $5.95 -
SIG SAUER PMAG CROSS Magblock 5/10 (.308)
Sig Sauer Cross PMAG10 ACIS Pattern Magblock (2 or 5 Round Limiter for Hunting)
Fits the Sig Cross Magpul PMAG10 chambered in .308/7.62x51mm, .227 Fury, and 6.5 Creedmoor 10 round Pmags and will convert them to hold only 2 or 5 rounds for hunting.
- Load magazines on a closed bolt in most rifles.
- Easy to install. New style block allows you to use the stock locking plate.
- No external magazine modifications.
Magpul Part# for magazine: MAG1169-BLK
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $6.25 -
Maglula UpLula Magazine Loader/Unloader (5.56)
Maglula UpLula Magazine Loader/Unloader - Fits 223 Rem/556 Nato AR-15 Magazine
- Eliminates Wear on Feed Lips
- Takes One-Third the Time of Thumb Loading
- Prolongs Magazine Liffe
$25.95 -
Ohio Ordnance HCAR, BAR Magblock 10/20 (.30-06)
Fits Ohio Ordnance Works H.C.A.R. and BAR .30-06 30 round magazines.
- Easiest and quickest way to make a 10 and 15 round HCAR and BAR Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$7.95 As low as: $6.95 -
Lancer XM5/MCX-Spear 10/20 Magblock (6.8x51)
LANCER NGSW XM5 / MCX-SPEAR 6.8X51MM - 277 SIG FURY MAGBLOCK
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 10 rounds.
- Only fits Lancer MCX-Spear 6.8x51mm 20-round magazines.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and will replace the original base.*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.95 As low as: $5.95 -
Adjustable Universal AK47, AK74 Magazine Limiter (RETAIL 3 PACK)
MAGBLOCK UNIVERSAL AK LIMITER KIT (Retail 3 Pack)
ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST METAL AK TYPE MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST 30 ROUND MAGAZINES TO SLIGHTLY LESS THAN 10 ROUNDS.
* Optional Locking tab can be added for Pmag AK Magazines below.
Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
Fits most steel 30 round AK47, AK74, AKS, SKS, VZ, and Saiga magazines and will convert them to hold only 10 or 15 rounds. Replaces the flat locking plates at the bottom of the spring. This part must be removed. Tested with Romanian, Russian, Korean, Promag, Saiga, IO, Chinese magazines and more.
- Features a spring catch which will allow an easy attachment point to the spring. This prevents the block making noise and epoxy can be added at this point to make it permanent.
- Pre notched cut outs in the most common lengths for easy cutting.
- Works on many military spec steel AK47 magazines.$21.95 As low as: $20.95 -
ASC 6.5 Grendel Magblock 5/10 (Hunting)
ASC USGI 6.5 Grendel, 6mm ARCMagblock 5/10 MCL (Magazine Capacity Limiter)
- For use in ASC USGI 6.5 Grendel & 6mm ARC 10 round magazines.
- These blocks will convert a 10 round magazine to hold only 5 or 2 rounds.*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.
$6.59 As low as: $5.95
