Rifles
-
HEXMAG AR-10, SR25 5/20 Magblock (Hunting)
Hexmag AR-10/SR25 Magblock 5/20
- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.
- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds.
- Uses the original Hexmag locking plates.
$6.95 As low as: $5.95 -
PROMAG Mini 30 Ruger Magblock 10/30 (Polymer)
PROMAG Ruger Mini 30 Magblock 10/30 Magazine Capacity Limiter
This block is for use in PROMAG RUGER 30 round Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.
- Only for use in PROMAG manufactured magazines.
- Designed to work in the polymer magazine only.
$6.95 As low as: $5.95 -
PROMAG M14 -M1A Blocks 10/20
ProMag M14/M1A 7.62x51mm/.308 20 round magazines.
- Easiest and quickest way to make a 10 round M14 Promag (Only) Magazine.
- Can be permanently attached to the spring with epoxy.
- The block attaches to the spring to prevent noise and movement.
- No magazine modifications required.
-Allows loading on a closed bolt with 10 rounds installed.
-New light weight design.
-This block is designed for the PROMAG M14/M1A 20 Round magazine, only. Military surplus and other manufacturers use our standard block.
$6.50 As low as: $5.95 -
Pmag LR 10 Magblock 5/10 (.308) Gen M3 (5 Round)
Pmag LR10 Magblock GEN M3 Magazine Capacity Limiters (5 Round for Hunting)
Fits the Magpul LR10 .308/7.62x51mm 10 round Pmags and will convert them to hold only 5 rounds for hunting.
- Will NOT fit older version magazines. Gen M3 Only.
- Load magazines on a closed bolt in most rifles.
- Easy to install. New style block allows you to use the stock locking plate.
- No external magazine modifications.
$6.50 As low as: $5.95 -
Lancer L7 5/10 Magblock (.308)
Lancer L7 5/10 Limiter for 10 round magazines in .308/7.62x51mm.
- This block will replace the lower spring attachment point or locking plate and convert a 10 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and will replace the original base.$6.50 As low as: $5.75 -
US PALM AK47 10/30 Magblock (7.62x39)
Magblock for US Palm AK47 (7.62x39mm) Magazines.
- This block fits the US Palm 30 round AK47 magazines in 7.62x39mm and will convert them to a 10 round magazine.
Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK
$7.49 As low as: $5.95 -
Lancer L7 5/20 Magblock (Hunting) (.308)
Lancer L7 5/20 Limiter for 20 round magazines in .308/7.62x51mm.
- This block will replace the lower spring attachment point or locking plate and convert a 20 round magazine to hold only 5 rounds for hunting.
- Only fits L7 Advanced Warfighter with slide on base as shown.
- Does not affect reliability.
- No increase in spring pressure or wear.
Note: This is a custom modified Pmag block and will replace the original base.$6.95 As low as: $5.95 -
ASC 6.5 Grendel 10/25 Limiter
ASC USGI 6.5 Grendel Magblock 10/25 MCL (Magazine Capacity Limiter)
- For use in ASC USGI 6.5 Grendel 25 round magazines.
- These blocks will convert a 25 round magazine to hold only 10 rounds.$5.95 As low as: $5.49 -
ASC 6.5 Grendel 5/25 Magblock (5 Round Limiter Hunting)
ASC 6.5 Grendel USGI Magblock 5/25 (5 Round Magazine Capacity Limiter)
- Fits USGI 25 round magazines made by ASC 6.5 Grendel.
- This block will attach to the bottom of the spring.
- Will convert a 25 round (6.5 Grendel) magazine to hold only 5 rounds for hunting.
- Magazines can be loaded with the bolt closed in most rifles. Fitting may be required in some cases.
- Does not affect reliability.
- No increase in spring pressure.
-Installs at the base of the magazine.$6.95 As low as: $5.95 -
KCI AR15 Magblock 10/30 (5.56)
Magblock 10/30 limiter for KCI 5.56x45/.223 mm AR Magazines only.
- Tested and designed for KCI AR-15 magazines.
- These blocks will convert a 30 round 5.56x45 mm magazine to hold only 10 rounds.$6.50 As low as: $4.95 -
Ruger Mini 14 Magblock 5/30 (Hunting)
Mini 14 Magblock 5/30 MCL (Magazine Capacity Limiter for Ruger Magazines for Hunting
This block is for use in RUGER 30 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 30 round magazine to hold only 5 rounds for hunting.
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
Ruger Mini 14 Magblock 5/20 (Hunting)
Mini 14 Magblock 5/20 MCL (Magazine Capacity Limiter for Ruger Magazines for Hunting.
This block is for use in RUGER 20 round Mini 14 magazines. These blocks will attach to the lower spring and convert a 20 round magazine to hold only 5 rounds.
- Only for use in RUGER manufactured magazines.
- This is a modified USGI magblock.
$6.95 As low as: $5.95 -
Beretta BM-59 Magblock 5/20 (.308) Hunting
Beretta BM-59 5/20 Magblock .308win/7.62x51 (Hunting)
Fits Beretta BM-59 Magazines in .308/7.62x51mm 20 round magazines and will convert them to hold only 5 rounds for hunting.
- No need to drill any holes.
- Load magazines on a closed bolt.
- Easy to install.
- No external magazine modifications.
$7.95 As low as: $6.95 -
Beretta BM-59 Magblock 15/20 (.308)
Beretta BM-59 15/20 Magblock
Fits Beretta BM-59 Magazines in .308/7.62x51mm 20 round magazines and will convert them to hold only 15 rounds for Colorado.
- No need to drill any holes.
- Load magazines on a closed bolt.
- Easy to install.
- No external magazine modifications.
$7.95 As low as: $6.95 -
Sale
PMAG 15 MCL 10/15 Magblock (Gen 2)
Magblock 10/15 MCL (Magazine Capacity Limiter) for Magpul 15 round Pmags in .223/5.56mm Gen M1 and Gen M2 Only.
- This block will replace the lower spring attachment point or locking plate and convert a 15 round magazine to hold only 10 rounds.
- The Pmag dust covers will still fit when loaded.
- Magazines can be loaded with the bolt closed.
- Does not affect reliability.
- No increase in spring pressure.
- Fits Gen1 and Gen 2 Pmag 15 only.
Regular Price: $5.95
Special Price $4.49