Taurus GX4 Magblock 10/11 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus GX4 11 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX4 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Taurus PT111 G2 Magblock 10/12 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT111 G2 12 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus PT111 G2 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

***This is the same Limiter as the Sig P320 10/12 blocks and may be marked as such.***

*This block will also work in G3C 12 round magazines and limit them to 10 rounds. 

Taurus PT92 and PT99 Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT92 and PT99 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. Save time and money converting your magazines to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if a permanent modification is needed to be legal.

- Simple install to make 10/15 Taurus PT92 and PT99 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92/PT99 magazines as shown in the photos. Magazines marked "Made in Brazil" with metal followers. Other types of magazines will require modification of the limiter or a different size.

Please click on photos for installation instructions.

FYI: This limiter can also be made using our Universal limiter kit. Cut the Universal Pistol limiter flush at the base with the #9 showing in the indicator notch then set in place using glue. * The right rear part at the base of the limiter may need to be sanded down if it interferes with the magazine relaease hole. (See photos)

Taurus G3 Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus G3 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Taurus G2C Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus G2C 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus PT111 G2 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Taurus PT24/7 Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT24/7 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Taurus PT24/7 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT24/7 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

Taurus PT1911 Magblock 5/8 (.45) 5 Round Limiter for Hunting

This Magblock fits the factory Taurus PT1911 8 round .45acp magazines and will limit them to 5 rounds for hunting. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 5/8 Taurus PT1911 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT1911 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Taurus TX-22  (.22LR) Magblock 10 Round Limiter 

- Fits 15 round Taurus TX-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

ProMag 1911  .45 Magblock

• Fits 15 round ProMag 1911 .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Taurus G3 Magblock 10/17 and 15/17 (9mm) 10 and 15 Round Limiter

This Magblock fits the factory Taurus G3 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Taurus TX-22  (.22LR) Magblock 10 Round Limiter for 16 Round Magazine.

- Fits 16 round Taurus TX-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.