STI, 2011

Magblock Limiter For Tisas Checkmate, Military Arms Corp Mac 9 126mm 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Checkmate 2011 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

* This block will work in the Military Arms Mac 9 Double Stack 1911 magaziens along with the Tisas Night Stalker 2011 126mm magazines. 

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-Size magazines from .380, 9mm, .40, 10mm and .45 magazines (might need modifcation for sub-compact magazines).

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock 10 Round Limiter for STI Staccato - Checkmate 170mm 20 Round 9mm Magazines

- Fits 26 round 9mm Factory Staccato - Checkmate 170 mm magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below. If you're running the Checkmate 170mm magazines, then choose the G3 options.

Magblock 10 Round Limiter for STI Staccato 126mm 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Staccato STI P, XC, XL 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

- This block will also fit the MasterPiece arms DS9 Hybrid/2011 17-round 126mm magazines.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below. This block will also work in the New Checkmate 126mm magazines. Just choose the G3 option.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock 10 Round Limiter for STI Staccato 120mm 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Checkmate - Staccato STI C2 120 mm magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: If you have a newer Staccato STI magazine that has G3 on the back of the magazine, then you will need to click G3 option below. If you're running the Checkmate 120mm magazines, then choose the G3 options.

Magblock 10 Round Limiter for STI Staccato CS and C 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Staccato STI CS  magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Attention: Staccato has recently started offering the 16-round CS/C magazine with with a new spring and retaining plate. If you have them on your magazine, make sure to choose the correct option below. You will need a shorter block. See Pictures 

Type A Option: The spring is a silver color and the retaining plate doesn't have the raised cross inside of it.

Type B Option: The spring has a black tint to it and the retaining plate has a raised cross.

Magblock 10 Round Limiter for STI Staccato 120mm 15 Round 9mm Magazines

- Fits 15 round 9mm Factory Staccato STI C2 120 mm magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for MBX Extreme 126mm 15 Round .45 Magazines

- Fits 15 round .45 Factory MBX Extreme Staccato STI 126 mm magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of .45acp. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 126mm 18 Round 9mm Magazines

- Fits 18 round 9mm Factory Atlas Gunworks 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 140mm 21 Round 9mm Magazines

- Fits 21 round 9mm Factory Atlas Gunworks 140mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Atlas Gunworks Slidelock 120mm 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Atlas Gunworks 120 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the Slidelock (lock-back) follower style magazines. See pictures below of a Slidelock follower.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for MBX Extreme 155mm 26 Round 9mm Magazines

- Fits 26 round 9mm Factory MBX Extreme Bul Armory 155 mm magazines with COMPETITION FOLLOWER . 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9MM. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.