Springfield

Magblock Limiter Mec-Gaer 2011, Prodigy, Tisas Duty DS 22 Round 9mm Magazines

- Fits 22 round 9mm Mecgar 2011 - Prodigy 2011 magazines. 
- Easy installation into the base of the magazine (See pictures).
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Kore Essentials B1 Coyote Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

Magblock Cement 8oz Large Bottle

Magblock Cement (8 oz bottle). Features:
- Starts to set in only 1-3 minutes. Can be built up.
- Handling strength: 5 minutes.
- Color: Black.
- Viscosity: paste.
- Full Strength: 12 hours 

Large 8 ounce bottle 

Springfield Echelon Full-Size 9mm 10/15 Magblock

- Fits 15 round 9mm Echelon Factory magazines (Not Compact). 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield Echelon 9mm Magblock - This block is designed for the factory 15-round Full-Size (Not Compact) magazine, only.

Springfield Hellcat Pro 9mm 10/17 Magblock

- Fits 17 round 9mm Hellcat Pro magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Springfield Echelon 9mm 10/20 Magblock

- Fits 20 round 9mm Echelon magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Springfield Echelon 9mm Magblock

Springfield Echelon 9mm Magblock

- Fits 17 round 9mm Echelon magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Springfield Echelon 9mm Magblock

Springfield XDM Elite 9mm Magblock

- Fits 35 round 9mm XDM magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Springfield XDM Elite 9mm Magblock for 35 round magazine

Springfield SA35, SDS Imports L9A1 Hi-Power 9mm 10/15 Round Magblock

• Fits 15 round SA-35 and SDS Imports Hi-Power 9mm magazines. 
• Easy installation at the base of the magazine.
• Limits the magazine to 10 rounds of 9mm.
• Can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 26 Round 9mm Magazines

- Fits 26 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 20 Round 9mm Magazines

- Fits 20 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

ProMag Springfield XD-9 9mm Magblock

- Fits 15 round 9mm XD-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

ProMag Springfield XD-9 9mm Magblock

Magblock 10 Round Limiter for Springfield Double Stack 1911 .45 ACP magazines

- Fits 14 round .45 Springfield Double Stack 1911 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on Springfield Double Stack 1911 made by MecGar for Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

*WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield XDM-XD Pistol Limiter 3 Pack Kit

Save time and money by making your magazines legal. 

- This Springfield XDM-XD Magblock fits most magazines from Springfield XDM series and XD series in 9mm, .40, .45 up to 19- round capacity magazines.

- Easily installs into the follower (For Factory Springfield XDM-XD Magazines Only). It is held in place with spring tension alone or can be epoxied if desired.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

-Now offering Hellcat and Hellcat Pro Cut Blocks (Choose 1 or up to 3) to be cut to fit Hellcat 11, 13, 15 or 17 round magazines. If you choose only 1 then all 3 will be cut to that lenght. 

-If you have a Hellcat/Hellcat Pro with different capacity magazines you can now let us know and we will send the 3-pack cut to size and ready to go for the Hellcat-Hellcat Pro magazines.