Smith& Wesson

Smith & Wesson CSX 9mm Magblock 10 Round Limiter 

- Fits 15 round 9mm CSX magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 15 Round CSX Magazines. 

Magblock 10 Round Limiter for Act-Mag - Armscor Smith & Wesson M&P 17 Round Magazines

- Fits 17 round 9mm Act-Mag - Armscor Smith and Wesson M&P magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*This block is designed for the Act-Mag - Armscor S&W M&P 17-round magazines. This block won't work in factory S&W M&P magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mecgar Smith & Wesson 5900 Series Magblock 10/15 (9mm)

This Magblock fits the Mecgar Smith & Wesson 5900 Series 15 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine, and It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/15 Mecgar S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

-This block will also work on the Lionheart LH9 15-round magazines.

*This block has been tested on the MecGar Smith and Wesson 5900 series magazines only, and will not work in the factory S&W magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

S&W BODYGUARD 2.0 (.380) Magblock

- Fits 12 round .380 auto caliber Smith & Wesson Bodyguard 2.0 Magazines.  

- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of .380 auto caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block has only been tested on factory Smith and Wesson Bodyguard 2.0 12-round magazines, and will not work in other magazines without testing.

-This block is also used in the S&W 4006 series 11-round .40 magazines and is labed 4006.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Maglula UpLula Magazine Loader/Unloader - Fits 9mm-45 ACP 

• Takes One-Third the Time of Thumb Loading 

• Durable Polymer Construction

• Works with Single and Double Stack Magazines

Taran Tactical Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm M&P w/ a Taran Tactical +6 extensions
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines with a Taran Tactical +6 Magazine Extension with factory S&W mag spring.

Taran Tactical Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm M&P w/ a Taran Tactical +4 extensions
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines with a Taran Tactical +4 Magazine Extension with factory S&W mag spring.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Universal Pistol Limiter Instructions: Cut to #23 and glue flush at the bottom for 10/21 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #23 will show in the limiter window notch like in the photos.  

Smith & Wesson M&P Shield Plus 30 Super Carry 10 Round Limiter

- Fits 13 round 9mm M&P Shield Plus magazines chambered in 30 Super Carry. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 30 Super Carry. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Smith & Wesson 5900, 459, 559, & 659 Series Magblock 10/14 (9mm)

This Magblock fits the Smith & Wesson 5900 Series 14 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds under the magazine follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/14 S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

-Block is designed for the 14 round, black follower, early version, 659 series magazines. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P Shield Plus, Shield X, and Equalizer 9mm Sub-Compact Magblock 10 Round Limiter

- Fits 13 round 9mm M&P Shield Plus and Shield X magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- See video below for magazine disassembly instructions. 

 -This block is marked 6900. This block is also used for the S&W 6900 series magazine. 

ProMag 1911  .45 Magblock

• Fits 15 round ProMag 1911 .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Smith & Wesson 6900 Series Magblock 10/12 (9mm)

This Magblock fits the Smith & Wesson 6900 Series 12 round 9mm magazines and will limit them to 10 rounds.  The Smith & Wesson 69 Series magazine is a high-capacity magazine designed for Smith & Wesson's 69 Series. As such, this magazine will fit and function in any pistol from the series, including any of the following: 469, 669, 6904, 6906, 6924, 6926, 6944 and 6946. 

-Simple install to make 10/12 S&W magazines.
- Instals at the base of the magazine. 
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 15 round 9mm M&P full size magazines. (Identified by extra spring coils at the base) 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 15 Round Magazines. 

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.  

*This block will not work on M&P Compact 9mm magazines, and are only designed for Full-Size magazines.

Smith & Wesson M&P .40 2.0 Magblock 10 Round Limiter

- Fits 15 round .40 M&P 2.0 Magazines. 
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Will only fit 2.0 version. Other versions require a shlightly shorter limiter. 

*Universal Limiter Instructions: Cut to #9 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #9 will show in the limiter window notch like in the photos.  

Attention: Smith and Wesson has just recently changed their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.