Smith& Wesson
-
Smith & Wesson M&P Magblock 10/15 (.40)
Smith & Wesson M&P .40 Magblock 10 Round Limiter
- Fits 15 round .40 M&P magazines.
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Will not fit 2.0 version which needs a slightly longer version
*Universal Limiter Instructions: Cut to #8 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #8 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
Smith & Wesson M&P 2.0 Magblock 10/15 (.40)
Smith & Wesson M&P .40 2.0 Magblock 10 Round Limiter
- Fits 15 round .40 M&P 2.0 Magazines.
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Will only fit 2.0 version. Other versions require a shlightly shorter limiter.
*Universal Limiter Instructions: Cut to #9 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #9 will show in the limiter window notch like in the photos.
Attention: Smith and Wesson has just recently changed their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.
$6.59 As low as: $5.95 -
S&W M&P 2.0 Full Size 10/15 Magblock (9mm)
Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters
- Fits 15 round 9mm M&P full size magazines. (Identified by extra spring coils at the base)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 15 Round Magazines.*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
ETS Smith & Wesson M&P Magblock 10/21(9mm)
ETS Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters
- Fits 21 round 9mm ETS M&P magazines.
- New design installs into the follower like in the pictures.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with ETS S&W 21 round Magazines.$6.59 As low as: $5.95 -
ETS Smith & Wesson M&P 10/17 Magblock (9mm)
ETS Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters
- Fits 17 round 9mm ETS M&P magazines.
- New design installs into the follower like in the pictures.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with ETS S&W Magazines.-This block is for the ETS S&W M&P 9mm 17-round magazine only.
$6.50 As low as: $5.95 -
ProMag S&W M&P Magblock 10/17 (9mm)
ProMag Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters
- Fits 17 round 9mm ProMag M&P magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with ProMag S&W Magazines.*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #15 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #15 will show in the limiter window notch like in the photos.
$6.59 As low as: $5.95 -
S&W SD40 VE, SIGMA, SD40VE, SD40G Magblock 10/14 (.40)
Smith & Wesson SD40 VE .40 Magblock 10 Round Limiters
- Fits 14 round .40 SD40VE, SD40G, SD40E, SD40P, SD40V and SIGMA magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of .40 cal.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 14 Round Magazines.
- Save time and money, easier than pinning a magazine. Easily Block Magazines.*Universal Pistol Limiter Instructions: Cut to #8-9 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #8-9 will show in the limiter window notch like in the photos. (Block purchased here already has this done).
$6.59 As low as: $5.95 -
S&W M&P 2.0 Magblock 10/13 (.40)
Smith & Wesson M&P .40 2.0 Magblock 10 Round Limiter for 13 Round Magazines
- Fits 13 round .40 M&P 2.0 Magazines.
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Will only fit 2.0 version.
*Universal Limiter Instructions: Cut to #5 and glue flush at the bottom for 10/13 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #5 will show in the limiter window notch.
Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.
$6.59 As low as: $5.95 -
S&W SD9 VE, SIGMA, SD9VE, SD9G Magblock 10/16 (9mm)
Smith & Wesson SD9 VE 9mm Magblock 10 Round Limiters
- Fits 16 round 9mm SD9VE, SD9G, SD9E, SD9P, SD9V and SIGMA magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 16 Round Magazines.
- Save time and money, easier than pinning a magazine. Easily Block Magazines.*Universal Pistol Limiter Instructions: Cut to #12-13 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #12-13 will show in the limiter window notch like in the photos. (Block purchased here already has this done).
$6.59 As low as: $5.95 -
Smith & Wesson 469, 669 and 6900 Series Magblock 10/12 (9mm)
Smith & Wesson 6900 Series Magblock 10/12 (9mm)
This Magblock fits the Smith & Wesson 6900 Series 12 round 9mm magazines and will limit them to 10 rounds. The Smith & Wesson 69 Series magazine is a high-capacity magazine designed for Smith & Wesson's 69 Series. As such, this magazine will fit and function in any pistol from the series, including any of the following: 469, 669, 6904, 6906, 6924, 6926, 6944 and 6946.
-Simple install to make 10/12 S&W magazines.
- Instals at the base of the magazine.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.$6.50 As low as: $5.95 -
Smith & Wesson 6900 Series (6904,6906,6924,2926,6944 and 6946) Magblock 10/12 (9mm)
Smith & Wesson 6900 Series Magblock 10/12 (9mm)
This Magblock fits the Smith & Wesson 6900 Series 12 round 9mm magazines and will limit them to 10 rounds. The Smith & Wesson 69 Series magazine is a high-capacity magazine designed for Smith & Wesson's 69 Series. As such, this magazine will fit and function in any pistol from the series, including any of the following: 469, 669, 6904, 6906, 6924, 6926, 6944 and 6946.
-Simple install to make 10/12 S&W magazines.
- Instals at the base of the magazine.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.$6.50 As low as: $5.95 -
Smith & Wesson 5900 Series, 5906 Magblock 10/15 (9mm)
Smith & Wesson 5900 Series Magblock 10/15 (9mm)
This Magblock fits the Smith & Wesson 5900 Series 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds under the magazine follower. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10/15 S&W 5900 Series magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.
$6.50 As low as: $5.95