Smith& Wesson

Mecgar Smith & Wesson 5900 Series Magblock 10/20 (9mm)

This Magblock fits the Mecgar Smith & Wesson 5900 Series 20 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine, and It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/20 Mecgar S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Smith & Wesson M&P 22 Magnum Magblock 10 Round Limiters

- Fits 30 round .22 Magnum M&P magazines. 
- New design installs at the base of the magazine and is held in place with spring tension. You will use the factory locking plate.
- Limits the magazine to 10 rounds of 22 magnum. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 30 Round M&P 22 Magnum Magazines. 

Smith & Wesson M&P Shield Plus 30 Super Carry 10 Round Limiter

- Fits 16 round 9mm M&P Shield Plus magazines chambered in 30 Super Carry. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 30 Super Carry. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

Smith & Wesson Model 41, 422, 622, and 2206  (.22LR) Magblock 10 Round Limiter 

- Fits 12 round .22 Model 41, 422, 622, and 2206 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Smith & Wesson M&P FPC, 2.0 9mm Magblock 10 Round Limiters

- Fits 23 round 9mm M&P FPC (Folding Pistol Caliber Carbine) magazines. 
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate..  

 

Smith & Wesson SD9 VE 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm SD9VE, SD9G, SD9E, SD9P, SD9V and SIGMA magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W 17 Round Magazines. 
- Save time and money, easier than pinning a magazine. Easily Block Magazines. 

*Universal Pistol Limiter Instructions: Cut to #16 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.  (Block purchased here already has this done).

Smith & Wesson SW99 9mm Magblock 10 Round Limiters

- Fits 16 round 9mm SW99 magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W SW99 16 Round Magazines. 

*Universal Pistol Limiter Instructions: Cut to #16 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.  

Smith & Wesson M&P .45 Magblock 10 Round Limiters

- Fits 14 round .45ACP M&P magazines. 
- New design installs at the base of the spring with the "L" shape of the spring going through the block.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P .45acp

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Universal Pistol Limiter Instructions: Cut to #16+hole and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #16 will show in the limiter window notch like in the photos.  

Smith & Wesson M&P 2.0 Compact Magblock 10/15 Limiter

This Magblock fits the Smith & Wesson M&P 2.0 15 round 9mm magazines and will limit them to 10 rounds.   New design easily installs at the base of the spring. It is held in place with spring tension alone or can be glued or epoxied if desired. Block comes ready to install.

*If using our Universal Limiter for this magazine: Cut to #9-10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #9-10 will show in the limiter window notch like in the photos. 

Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures below.

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Smith & Wesson M&P22 (.22LR) Magblock 10 Round Limiter New Improved Fit

- Fits 12 round .22 M&P-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Epoxy, Machinable Fast Setting.

Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
Features a longer working time than the Red fast set epoxy:
- Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
- Handling strength: 4 hours.
- Color: Aluminum.
- Viscosity: Honey.
- Full Strength: 24 hours

3.5 Grams.

Epoxy Fast Setting

Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours

4.0 Grams.

M&P15 .22LR 10/25 Magblock 10 Round Limiter

- This block will convert 25 round M&P15 .22LR magazines into a 10 round magazine.

- Easy to install without damage to your magazines.

- Replaces the original locking plate.