Sig Sauer

Magblock 10 Round Limiter for MAGPUL AMAG 15 SIG P320 Compact Magazines

- Fits 15 round 9mm MAGPUL AMAG 15 SG9 Sig P320 Compact Magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*This block is designed for the NEW MAGPUL AMAG 15 SG9 P320 COMPACT 15-round magazines. This block won't work in factory Sig Sauer P320 magazines.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Sig P365 .380 auto12 Round Magazines

- Fits 12 round .380 auto Factory Sig P365-380, P365 Luxe AXG, P365-380 Rose magazines. 
- Save time and money with a simple install.
- Easy installation at the base of the spring, with the bottom of the block locking into the base locking plate.
- Limits the magazine to 10 rounds of .380. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

- This block is designed for the P365 .380 12-round magazine, and will not work in 9mm P365 magazines

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag Sig Sauer P226 Magblock 10 Round Limiter for 15 Round Magazines

This Magblock fits the Promag Sig P226 (Only) 15 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/15 Promag Sig Sauer P226 magazines. 
- No modification to the magazine is required.
-  Lightweight and will not interfere with magazine reliability.
- Tested on Promag Sig P226 magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures. 

Note: This block is designed for the Promag Sig P226 15-Round Magazines only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taran Tactical +1 Extension for Sig Sauer P320 10/18 (9mm) Magblock

- Fits 17 round 9mm Sig P320 with the TTI (Taran Tactical Innovations) +1 Magazine Extension.  *See Pictures For Details
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block is designed to work with the +1 TTI Extension for the Sig P320 Full-size 17-round magaiznes.

Magblock 10 Round Limiter for Sig P226 19 Round Mec-Gar Magazines

This Magblock fits the Sig P226 X-Five Mec-Gar 19 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.

- Easy installation at the base of the spring.

- Limits the magazine to 10 rounds of 9mm.

- Held in place with spring tension or can be epoxied for a permanent modification.

- Lightweight, efficient design.

- Made of a super strong, heat resistant, fiber reinforced polymer.

Block used is a Universal Pistol Limiter cut to #21.

Magblock 10 Round Limiter for ETS Sig P320 21 Round Magazines

- Fits 21 round 9mm ETS Sig P320 magazines. 
- Easy installation into the follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

- This block will only work in ETS Sig P320 10/21 magazines. It will not work in Sig factory P320 magazine without modification. 

We make a block for the factory Sig P320 10/21 magazine. 

Magblock 10 Round Limiter for ETS Sig P320 15 Round Magazines

- Fits 15 round 9mm ETS Sig P320 magazines. 
- Easy installation into the follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

- This block will only work in ETS Sig P320 10/15 magazines. It will not work in Sig factory P320 magazine without modification. 

We make a block for the factory Sig P320 10/15 magazine. 

Magblock 10 Round Limiter for ETS Sig P320 17 Round Magazines

- Fits 17 round 9mm ETS Sig P320 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

- This block will only work in ETS Sig P320 10/17 magazines. **It will not work in Sig factory P320 magazine without modification. 

We make a block for the factory Sig P320 10/17 magazine. 

Sig Sauer P320 and P250 Magblock 10 round limiter for 18 round magazines.

This Magblock fits the Sig P320 and P250 18 round .40 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/18 Sig Sauer P320 and P250 magazines. 

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Tested on factory Sig P320 and P250 18 round magazines. The block may need to be modified to work with magazines from other manufactures.

-NOTE: Universal Limiter Instructions: Use at maximum length with "22" showing in the indicator notch. Use the locking tab, but cut off the lock button for a flat base. Cement Together.

Magblock 10 Round Limiter for Sig P226 Mec-Gar 20 Round Magazines

- Fits 20 round 9mm Sig P226 Italian made magazines as pictured
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*These blocks will not work in the Sig Sauer branded P226 X-Five/Legion 20-round magazines, as well as Mecgar Competition 20-round magazines. We sell blocks for those magazines located in our P226 section.

Magblock 10 Round Limiter for Sig P365/XL 15 Round Magazines

- Fits 15 round 9mm Factory Sig P365 magazines. 
- Save time and money with a simple install.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Sig P226 ,12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
- Uses the Universal Limiter cut with #6 in the indicator notch with a flush base.

Magblock 10 Round Limiter for Sig P229 and P226  12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P229 and P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-Size magazines from .380, 9mm, .40, 10mm and .45 magazines (might need modifcation for sub-compact magazines).

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal