Sig Sauer

Magblock 10 Round Limiter for Sig 550 / PE90 30 Round Magazines

- Fits 30 round 5.56mm Sig 550, PE90, SG 550 factory 30 round magazines.
- Easy installation. limiter replaces the original locking plate.
- Limits the magazine to 10 rounds of 5.56mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. 
- Made of strong, lightweight polymer. 
 

Magblock 10 Round Limiter for Sig P226 18 Round Magazines

This Magblock fits the Sig P226 X-Five 18 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.

- Easy installation at the base of the spring.

- Limits the magazine to 10 rounds of 9mm.

- Held in place with spring tension or can be epoxied for a permanent modification.

- Lightweight, efficient design.

- Made of a super strong, heat resistant, fiber reinforced polymer.

Please Note: These limiters are designed for the older P226 X-Five magazines and won't work in the newer X-Five P226.

Magblock 10 Round Limiter for Sig P229 and P226  12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P229 and P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
-*Same as CZ 10/12 limiter and likely marked as "CZ".

Magblock 10 Round Limiter for Sig P226 (.40) 13 Round Magazines

- Fits 13 round .40 Sig P226 magazines made by Mec-Gar. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
  *Universal Limiter can be used to make this block. Cut the base flush with #8 showing in the indicator notch. 

Magblock 10 Round Limiter for Sig P226 X-Carry Legion 18 Round Magazines

- Fits 18 round 9mm Sig P226 magazines made by Mec-Gar. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*This Limiter can be made using the Universal Pistol Limiter by cutting flush at the base with #16 in the indicator notch. 
*The product sold at this link is pre-cut and fixed at this length. 

* This block will work in the Tisas Zigan 9mm Mecgar 18-round magazine along with the Steyr ATD 18-round magazine.

Magblock 10 Round Limiter for Sig P229 & P228 13 Round Magazines

- Fits 13 round 9mm Factory Sig P228 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for Sig P226 20 Round Magazines

- Fits 20 round 9mm Sig P226 US made magazines as pictured
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-This block will not work in the newer P226 X-Five/Legion 20-round magazines.

Magblock 10 Round Limiter for Sig Sauer P320 Factory 17 Round Magazines

- Fits 17 round 9mm Factory Sig P320 and P250 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

-This block will work in the 17rd X-Carry, M18, M17, X-Legion magazines. It will also work in the P250 16-round magazines too.

Magblock 10 &15 Round Limiter for Factory Sig P320 21 Round Magazines

- Fits 21 round 9mm Factory Sig P320 and P250 magazines. 
- Also works in factory Sig X-Five 21 round magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

- This is also the same product as the Sig X-Five limiter for 21 round and "new" P211-GTO magazines.

-NOTE: Universal Limiter Instructions: Use at maximum length with 25 showing in the indicator notch. Use the locking tab, but cut off the lock button for a flat base. Cement Together.

Magblock 10 Round Limiter for Sig P320 and P250 Subcompact 12 Round Magazines

- Fits 12 round 9mm Factory Sig P320/P250 Subcompact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for Sig P320 (.40) 13 Round Magazines

- Fits 14 round .40 Sig P320 factory magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 FYI: Universal Limiter can be used to make this item. Cut limiter flush at the base with between 11-12 in the indicator notch. 

Sig Sauer P320 and P250 Compact Magblock 10 Round Limiter for Factory 15 Round Magazines

This Magblock fits the Sig P320 and P250 Compact 15 round 9 mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/15 Sig Sauer P320 and P250 compact magazines. 
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Tested on factory Sig P320/P250 compact, XCompact, Xcompct Pro magazines. The block may need to be modified to work with magazines from other manufactures.

Options: See attached photos and video. Sig has changed their locking plate/retaining plate on the Sig P320 15 round magazine recently. They now use a thinner locking plate on the newer magazines. It's important to watch the whole video to determine which size retaining plate you have in your magazine.

Magblock 10 Round Limiter for Sig P226 (.40) 15 Round Magazines

- Fits 15 round .40 Sig P226 magazines made by Mec-Gar.  (13+2 extension)
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for ProMag Sig P320 17 Round Magazines

- Fits 17 round 9mm ProMag Sig P320 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

- This block will only work in PROMAG BRANDED Sig P320 17-round magazines and will not work in factory Sig P320 17-round magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.