Ruger

Ruger P89 and P85/95 Magblock 10 Round Limiter

This Magblock fits theRuger P89 and P85 and P95 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Ruger P89 and P85 Magazines.

-No external modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instructions: If using the Universal limiter to make this cut to #9 in the indicator notch and cement the base. Next the sides of the base will need to be sanded down to fit into the bottom of the magazine. The block sold here is pre cut and sanded. 

Ruger BX-15 Magblock 5 Round Limiters for .22WMR & .17HMR for hunting.

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 5 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Magblock 10 Round Limiter for Ruger LCP Max (.380 ) 12 Round Magazines

- Fits 12 round .380 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger LCP Max 

Magblock 10 Round Limiter for Ruger Max 9 (9mm) 12 Round Magazines

- Fits 12 round 9mm magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger Max 9. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Ruger Security-380 Magblock 10 Round Limiter for 15 Round Magazines

This Magblock fits the Ruger Security-380 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired. This block works inconjuntion with the factory spacer from Ruger. Please see pictures for details.

-Simple install to make 10 round Ruger Security .380 Magazines.

-No modification to the magazine is required. The spring bottom can fit into the drilled hole in the limiter or you can bend the spring if desired.

-Lightweight and will not interfere with magazine reliability.

Ruger Security 9 Compact, PC Carbine Compact Magblock 5 Round Limiter for 10 Round Magazines

This Magblock fits the Ruger Security 9 Compact, PC Carbine Compact, 10 round magazines and will limit them to 5 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 5 round Ruger Security 9 Compact Magazines for New York City.

-No modification to the magazine is required. The spring bottom will need to be bent so that the block can go into the spring.

-Lightweight and will not interfere with magazine reliability.

Ruger American Compact 10/12 Magblock 10 Round Limiter for 12 Round Magazines

This Magblock fits the Ruger American Compact Pistol  9mm, 12 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger American Pistol Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "3" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Promag Ruger SR9 and SR9C 10/17 Magblock 10 Round Limiter for 17 Round Magazines

This Magblock fits the Promag Ruger SR9 ands SR9C 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Ruger SR9 Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

- This block is designed for the Promag Ruger SR9 17-rd magazine only, and will not fit factory Ruger SR9 magazines.

Maglula UpLula Magazine Loader/Unloader - Fits 9mm-45 ACP 

• Takes One-Third the Time of Thumb Loading 

• Durable Polymer Construction

• Works with Single and Double Stack Magazines

Ruger LC Carbine - SGM Tactical Glock 10mm Magblock 10 and 15 Round Limiter for 30 Round Magazines

- Fits 30 round Ruger LC Carbine / SGM Tactical Glock 10mm magazines manufactured in Korea.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of 10mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ProMag 1911  .45 Magblock

• Fits 15 round ProMag 1911 .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Ruger BX-15 Magblock 10 Round Limiters for .22WMR & .17HMR

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

- Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used. 

Note: This block will fit the New Shadow Systems MR920 15 round magazine and the New Ruger RXM 15-round magaizne.

.