H&K

Magblock 10 Round Limiter for KCI, KCI Gen2 HK MP5, SP5, HK94 9mm 20 Round Magazines

- Fits 20 round 9mm KCI HK MP5 style magazines.

- Limits the magazine to 10 rounds of 9mm

-Held in place with spring tension or can be epoxied for a permanent modification. 

- Lightweight, efficient design.

- This block sits in the follower (See Pictures for Install).

NOTE: This block is designed for the KCI HK MP5 style magazine, and has not been tested on any other magazines.

- This block will also work in the PTR 9C, 9R, 9KT, 20-round MP5 style magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch CC9 9mm

- Fits 12 round 9mm H&K CC9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch VP9 A1 K 9mm

- Fits 15 round 9mm H&K VP9 A1 K magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 *Attention: This block will not fit the standard HK VP9 & P30 15-round magazine.

H&K Promag USC .45 Magazine Magblock 10/15 Limiter

- For use in H&K Promag USC .45 15 round polymer magazines as pictured.

- These blocks will convert a 15 round magazine to hold only 10 rounds.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

 Magblock 10 Round Limiter for Heckler & Koch P30, VP9 and VP9SK 9mm

- Fits 15 round 9mm H&K P30, VP9 and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be at #9.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

 *Attention: This block will not fit the new HK VP9 A1 15-round magazine.

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-Size magazines from .380, 9mm, .40, 10mm and .45 magazines (might need modifcation for sub-compact magazines).

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

 Magblock 10 Round Limiter for Heckler & Koch USP and P30 .40

 - Fits 13 round .40 H&K USP and P30 magazines. 
- Limits the magazinbe to 10 rounds of .40
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "6" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

 Magblock 10 Round Limiter for Heckler & Koch USP, P30 and VP9 9mm

- Fits 15 round 9mm H&K USP, P30 and VP9 magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "9" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 Magblock 10 Round Limiter for Heckler & Koch USP .45 

- Save time and money converting your magazines.
- Fits 12 round .45 H&K USP magazines. 
- Limits the magazinbe to 10 rounds of .45
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "3" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

 Magblock 10 and 15 Round Limiter for Heckler & Koch P30 and VP9 9mm

- Fits 20 round 9mm H&K P30 and VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "22" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

-This block is for factory HK 20 round VP9/P30 magazines, and will not work on magazines with HK +5 extensions.

 Magblock 10 Round Limiter for Heckler & Koch USP9 Compact & P2000 Full-size Magazine

- Fits 13 round 9mm H&K USP, P2000 full-size magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 Magblock 10 Round Limiter for Heckler & Koch USP Expect 9mm

- Fits 18 round 9mm H&K USP expert magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "16" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 Magblock 10 Round Limiter for Heckler & Koch P30SK and VP9SK 9mm

- Fits 13 round 9mm H&K P30SK and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be cut around 4-5.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "4-5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details.