H&K

Magblock 10 Round Limiter for H&K MP7 4.6x30mm 30 Round Magazines

- Fits 30 round 4.6x30mm HK MP7 factory magazines.
- Limits the magazine to 10 rounds of 4.6x30mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

 

 Magblock 10 Round Limiter for ProMag Heckler & Koch VP9 9mm

- Fits 17 round 9mm ProMag H&K VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 

FYI: This Magblock has been designed to be used with ProMag HK VP9 10/17 magazines. 

Will not work in factory HK magazines.

Magblock 10 Round Limiter for H&K MP5 9mm 30 Round Magazines

- Fits 30 round 9mm HK MP5 factory magazines.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. (Follower insert requires epoxy or silicone to securely hold in place).
- Lightweight, efficient design. 

ATTENTION: This block will not work in the Zenith MP5 style magazines. We have blocks listed for that under Zenith ZF-5
 

 

 Magblock 10 Round Limiter for Heckler & Koch P30 and VP9 9mm

- Fits 15 round 9mm H&K P30 and VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be cut around 8-9.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "8-9" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 

Epoxy Fast Setting

Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used.
Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours

4.0 Grams.

Epoxy, Machinable Fast Setting.

Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used.
Features a longer working time than the Red fast set epoxy:
- Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
- Handling strength: 4 hours.
- Color: Aluminum.
- Viscosity: Honey.
- Full Strength: 24 hours

3.5 Grams.

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

 Magblock 10 Round Limiter for Heckler & Koch USP and P30 .40

 - Fits 13 round .40 H&K USP and P30 magazines. 
- Limits the magazinbe to 10 rounds of .40
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "6" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

 Magblock 10 Round Limiter for Heckler & Koch USP, P30 and VP9 9mm

- Fits 15 round 9mm H&K USP, P30 and VP9 magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "9" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 

 Magblock 10 Round Limiter for Heckler & Koch USP .45 

- Save time and money converting your magazines.
- Fits 12 round .45 H&K USP magazines. 
- Limits the magazinbe to 10 rounds of .45
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "3" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

 Magblock 10 Round Limiter for Heckler & Koch P30 and VP9 9mm

- Fits 20 round 9mm H&K P30 and VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "22" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 

-This block is for factory HK 20 round VP9/P30 magazines, and will not work on magazines with HK +5 extensions.

 

 Magblock 10 Round Limiter for Heckler & Koch USP9 Compact & P2000 Full-size Magazine

- Fits 13 round 9mm H&K USP, P2000 full-size magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 

 Magblock 10 Round Limiter for Heckler & Koch USP Expect 9mm

- Fits 18 round 9mm H&K USP expert magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "16" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

 

 Magblock 10 Round Limiter for Heckler & Koch P30SK and VP9SK 9mm

- Fits 13 round 9mm H&K P30SK and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be cut around 4-5.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "4-5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details.