Glock
-
Magblock Universal Pistol Limiter Kit
Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal
$6.50 As low as: $5.49 -
PMAG 15 GL9 Glock Magblock 10/15 (9mm)
Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.
- Fits 15 round Magpul Pmag GL9 magazines for Glock 19.
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.
Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used.Note: This block will fit the New Shadow Systems MR920 15 round magazine.
$6.59 As low as: $5.95 -
PMAG 17 GL9 Glock Magblock 10/17 (9mm)
Magblock 10 Round Limiter for Pmag 17 GL9 Magazines.
- Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.
$6.59 As low as: $5.95 -
Glock Magblock for 33 Round Magazine (9mm)
Glock 9mm Magblock for 33 Round (9mm) Magazines
- Fits 33 round 9mm Foctory Glock 33 round magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.$7.49 As low as: $6.49 -
Glock 19 Magblock 10/15 (9mm) for Older Style Follower
Glock 19 (9mm) Magblock (For Older Style Followers Only)
- Fits 15 round 9mm Foctory Glock 19 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures.$6.59 As low as: $5.95 -
Glock .45 Magblock for 27 Round Magazines
Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines
- Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.** Select desired magazine capacity before adding to your cart.
$7.49 As low as: $6.49 -
Glock .45 Magblock for 27 Round Scherer Magazines
Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines
- Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.** Select desired capacity below.
Patent pending$7.49 As low as: $6.49 -
Glock 20, 40 Magblock 10/15 (10 mm)
Glock 20 (10 mm) Magblock
- Fits 15 round 10 mm Glock 20 magazines. *See details on correct follower types below.
-Will also fit Korean Glock Magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm ammunition.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Patent Pending
Only compatable with the follower type shown in the pictures.$6.50 As low as: $5.95 -
Glock Magblock -2 Limiter for +2 Extension
Glock Magblock -2 (9mm)
This Magblock fits the Glock magazines with a +2 extension. Will basically limit just the +2 extension so you can add it to a magazine without changing the capacity.
- Minus 2 round adapter to limit the extended floorplate.
- Easily installed in seconds. It is held in place with spring tension alone or can be glued or epoxied if desired.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.*This item ONLY includes the small -2 adapter. Does not include the Glock 10/17 limiter shown.
*This will not work on all +2 Glock magazine extenios. It's only been tested on G19X and G17 magazines.
$5.49 As low as: $4.50 -
Epoxy Machinable- Fast Set
Epoxy, Machinable Fast Setting.
Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used. Features a longer working time than the Red fast set epoxy:
- Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
- Handling strength: 4 hours.
- Color: Aluminum.
- Viscosity: Honey.
- Full Strength: 24 hours 3.5 Grams.$4.09 As low as: $3.89 -
Epoxy Fast Setting
Epoxy Fast Setting
Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used. Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours 4.0 Grams.$3.95 As low as: $3.79 -
Glock Follower 9mm
Glock Follower (9mm) Replaces #4,5,6, & Gen 4
Replacement Glock 9 mm follower which is compatible with our Magblocks.
-Replaces #4,5,6, and Gen 2,3 and 4 magazine followers in 9 mm.
$4.95 -
Sale
Large 6" Flush Cutters
Flush cut pliers make easy work of cutting through the Glock, XD/XDM, Universal and Pmag limiters. Can cut universal limiters flush with the base.
Good for detail work.
Regular Price: $13.95
Special Price $10.95
-
Glock Magazine Spring for G17, 18, 20, 21, 22, 34, 35
Glock Magazine Spring 10 Coil Replacements
-Works with Magblock Limiters and Glock 9 mm Followers sold here.Compatable with the following magazines:
- G17, G18 and G35 17 round magazines.
- G20 15 round magazines
- G21 13 round Pre-Ban & older LE marked mags with follower 3955
- G21 10 round magazines only.
- G22, G35 Pre Ban and older LE marked mags.$7.49 -
Glock Magazine Spring for G17, 34, 35 and G22 (19 round magazines)
Glock Magazine Spring 11 Coil Replacements
Compatable with the following magazines:
- Fits 19 round G17, G18, G34, and G22 magazines
- Will fit Glocks 22, 31, 35, 37 newer mags.
- Can be cut down to fit 17 round G17 magazines.
$7.49