Glock
-
Glock .45 Follower G21
Glock .45 OEM Replacement Follower
Replacement Glock .45 follower which is compatible with Magblock Limiters
- Fits Glock 21 and other .45 Glock Magazines.
$4.95 -
Sale
Large 6" Flush Cutters
Larger 6" Flush cut pliers make easy work of cutting through the Universal Limiters, Glock, XD/XDM, and Pmag limiters. Can cut universal limiters flush with the base, but may take a cut on each side to get through.
Regular Price: $13.95
Special Price $10.95
-
Glock Extended Magazine Release
Glock Extended Magazine Release
Aids In Fast, Positive Mag Changes
Drop-in replacement for factory magazine catch has a deeply serrated button that protrudes farther from the frame to ensure positive, fast mag release on the first try. Gives a small but critical performance edge to the practical pistol competition shooter.Fits all 9mm, .40 S&W, .357 SIG, and .45 GAP Glocks as an extended release.
Same length as the factory catch on the G20, 21, 29, and 30, so it can be used as a direct replacement for the original part.
Here is one of the better YouTube videos that show how to install this part. It's an easy to install upgrade.$5.95 -
Glock Magazine Spring for G17, 34, 35 and G22 (19 round magazines)
Glock Magazine Spring 11 Coil Replacements
Compatable with the following magazines:
- Fits 19 round G17, G18, G34, and G22 magazines
- Will fit Glocks 22, 31, 35, 37 newer mags.
- Can be cut down to fit 17 round G17 magazines.
$7.49 -
Glock Magazine Spring for G17, 18, 20, 21, 22, 34, 35
Glock Magazine Spring 10 Coil Replacements
-Works with Magblock Limiters and Glock 9 mm Followers sold here.Compatable with the following magazines:
- G17, G18 and G35 17 round magazines.
- G20 15 round magazines
- G21 13 round Pre-Ban & older LE marked mags with follower 3955
- G21 10 round magazines only.
- G22, G35 Pre Ban and older LE marked mags.$7.49 -
Sale
Large 6" Flush Cutters
Flush cut pliers make easy work of cutting through the Glock, XD/XDM, Universal and Pmag limiters. Can cut universal limiters flush with the base.
Good for detail work.
Regular Price: $13.95
Special Price $10.95
-
Glock Follower 9mm
Glock Follower (9mm) Replaces #4,5,6, & Gen 4
Replacement Glock 9 mm follower which is compatible with our Magblocks.
-Replaces #4,5,6, and Gen 2,3 and 4 magazine followers in 9 mm.
$4.95 -
Epoxy Fast Setting
Epoxy Fast Setting
Hardman Double Bubble Pouch (4.0 grams). Will work for a few rifle or up to 5-10 pistol limiters depending on amount used. Features:
- Starts to set in only 3- 5 minutes. Mix small batches if doing a lot of limiters.
- Handling strength: 15-30 minutes.
- Color: white.
- Viscosity: honey.
- Full Strength: 24 hours 4.0 Grams.$3.95 As low as: $3.79 -
Epoxy Machinable- Fast Set
Epoxy, Machinable Fast Setting.
Hardman Double Bubble Pouch (3.5 grams). Will work for a few rifle or up to 10 pistol limiters depending on amount used. Features a longer working time than the Red fast set epoxy:
- Starts to set in 25 minutes, Handling time 4 hours. Mix small batches if doing a lot of limiters.
- Handling strength: 4 hours.
- Color: Aluminum.
- Viscosity: Honey.
- Full Strength: 24 hours 3.5 Grams.$4.09 As low as: $3.89 -
Glock 19 Magblock 10/15 (9mm) for Older Style Follower
Glock 19 (9mm) Magblock (For Older Style Followers Only)
- Fits 15 round 9mm Foctory Glock 19 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures.$6.59 As low as: $5.95 -
Glock .45 Magblock for 27 Round Magazines
Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines
- Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.** Select desired magazine capacity before adding to your cart.
$7.49 As low as: $6.49 -
Glock .45 Magblock for 27 Round Scherer Magazines
Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines
- Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.** Select desired capacity below.
Patent pending$7.49 As low as: $6.49 -
Glock 20, 40 Magblock 10/15 (10 mm)
Glock 20 (10 mm) Magblock
- Fits 15 round 10 mm Glock 20 magazines. *See details on correct follower types below.
-Will also fit Korean Glock Magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm ammunition.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Patent Pending
Only compatable with the follower type shown in the pictures.$6.50 As low as: $5.95 -
Glock Magblock -2 Limiter for +2 Extension
Glock Magblock -2 (9mm)
This Magblock fits the Glock magazines with a +2 extension. Will basically limit just the +2 extension so you can add it to a magazine without changing the capacity.
- Minus 2 round adapter to limit the extended floorplate.
- Easily installed in seconds. It is held in place with spring tension alone or can be glued or epoxied if desired.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.*This item ONLY includes the small -2 adapter. Does not include the Glock 10/17 limiter shown.
*This will not work on all +2 Glock magazine extenios. It's only been tested on G19X and G17 magazines.
$5.49 As low as: $4.50 -
Glock Magblock for 33 Round Magazine (9mm)
Glock 9mm Magblock for 33 Round (9mm) Magazines
- Fits 33 round 9mm Foctory Glock 33 round magazines and Korean manufacture magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.$7.49 As low as: $6.49