CZ-75

Magblock 10 Round Limiter for CZ-75 - CZ-85 Pre-Ban 15 Round Magazines

- Fits 15 round 9mm CZ75 - CZ-85  Pre-Ban factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

- This block is designed for the very early CZ-75 - CZ-85 Pre-Ban 15-round magazines shown in the photos.

- This listing is for the magblock (only) and not for the magazine. You will not receive a magazine with your order.

Magblock 10 Round Limiter for CZ-82, CZ-83 (.380 and 9x18) 12 Round Magazines

- Fits 12 round .380, 9x18 CZ-82, CZ-83 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380 and 9x18.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on CZ55 - CZ-82, CZ-83 factory magazines

Tanfoglio Stock Master Magblock 10/17 Round and 15/17 Round Limiter for 17 Round Magazines

This Magblock fits the Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "18" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

*This block is designed for the Tanfoglio Stock Master Factory magazine (ONLY), and will not work on Mec-Gar magazines. 

CZ-75 CzechmateTactical Sport 10/26 Magblock 10 Round Limiter for 26 Round factory magazines

This Magblock fits the CZ-75 Czechmate Tactical Sport 26 round magazines will limit them to 10 rounds. Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/26 CZ-75 Czechmate Tactical Sport magazines.

- No external modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

Magblock Universal Pistol Limiter 3 Pack Kit
Allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-size magazines from .380, 9mm, .40, 10mm and .45 magazines. (custom work needed to work in sub-compact magazines.

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

Magblock 10 Round Limiter for CZ-75, CZ-75B, CZ-75D, CZ-85 16 Round Magazines

- Fits 16 round 9mm CZ-75, CZ-85, CZ-75B, and CZ-75D factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #11.5 and glue flush at the bottom for 10/16 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11.5 with the top part of #11.5 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for CZ Scorpion Evo 3 Plus (9mm) 30 Round Magazines

- Fits 30 round 9mm CZ Scorpion Evo Window/Blackout 3+ magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

* This block is designed for the CZ factory Window and Blackout 3+ 30 Round magazine only. It will not work in the CZ Smoke Gray magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines. 

CZ Evo Factory Smoke Gray 10/30 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-magblock-10-30-9mm.html

Magblock 10 Round Limiter for CZ P-09 (9mm) 21 Round Magazines

- Fits 21 round Tactical 9mm CZ P-09 magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for CZ-75 SP-01 18 Round Magazines

- Fits 18 round 9mm CZ-75 SP-01 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*If using our Universal Limiter for this magazine: Cut to #21 and glue flush at the bottom for 10/18 limiter. Slide lock is not used. When epoxy cures assemble magazine. #21 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for CZ Scorpion Evo PGS Hybrid (9mm) 32 Round Magazines

- Fits 32 round 9mm CZ Scorpion Evo PGS Hybrid magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter CZ-75 Compact, P-01, PCR, Shadow Compact, Shadow Carry 15 Round Magazines

- Fits 15 round 9mm CZ75 Compact, P-01, PCR, Shadow 2 Compact and Shadow 2 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #8 and glue flush at the bottom for 10/15 limiter. 

*Tested on factory CZ75 Compact 15 round magazine that are marked 11rd .40 on the other side. This block will fit the new Shadow 2 Compact and Carry magazines.

Magblock 10 Round Limiter for CZ Scorpion (.32) 20 Round Magazines

- Fits 20 round .32auto CZ Scorpion magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .32auto. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 -This block will only work in the ,32 auto, 20 round magazine.

MecGar Competiton CZ-75 10 & 15 Round Magblock 

- Fits 19 round 9mm Mec-Gar Competition CZ-75B, SP-01, Shadow 2 magazines
- ***Reported to work with factory 18 round magazines also, may need to be slightly shortened for all 10 rounds in some if these magazines.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Maglula UpLula Magazine Loader/Unloader - Fits 9mm-45 ACP 

• Takes One-Third the Time of Thumb Loading 

• Durable Polymer Construction

• Works with Single and Double Stack Magazines