Pistols

Magblock 10 Round Limiter for ProMag Sig P320 21 Round Magazines

- Fits 21 round 9mm ProMag Sig P320 and P250 magazines. 
- Also works in factory Sig X-Five 21 round magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch Mk23 .45 

- Save time and money converting your magazines.
- Fits 12 round .45 H&K Mk23 magazines. 
- Limits the magazinbe to 10 rounds of .45
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 20 Round 9mm Magazines

- Fits 20 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 26 Round 9mm Magazines

- Fits 26 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Smith & Wesson M&P Five-Seven Magblock 10 & 15 Round Limiter

- Fits 22 round 5.7 mm S&W M&P 5.7 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

MecGar (K9) Tanfoglio Stock Master Magblock Round Limiter for 17 Round Magazines

This Magblock fits the Mecgar Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "15" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

*This block is designed for the MecGar (K9) Tanfoglio Stock Master magazine (ONLY), and will not work for factory magazines. 

Ruger Security 9 Compact, PC Carbine Compact Magblock 5 Round Limiter for 10 Round Magazines

This Magblock fits the Ruger Security 9 Compact, PC Carbine Compact, 10 round magazines and will limit them to 5 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 5 round Ruger Security 9 Compact Magazines for New York City.

-No modification to the magazine is required. The spring bottom will need to be bent so that the block can go into the spring.

-Lightweight and will not interfere with magazine reliability.

EAA Girsan MC14T Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the EAA Girsan MC14T 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 EAA Girsan MC14T magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original EAA Girsan MC14T magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taurus PT24/7 Magblock 10/15 (.40) 10 Round Limiter

This Magblock fits the factory Taurus PT24/7 15 round .40 magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Taurus PT24/7 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT24/7 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taurus PT-58 Magblock 10/12 (.380) 10 Round Limiter

This Magblock fits the Taurus PT-58 12 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/12 Taurus PT-58 .380 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original Taurus PT-58 magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock For Bul Armory SASII Ultralight, Compact 110mm 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Bul Armory SASII Ultralight and Compact 110mm magazines. 
- Easy installation into the follower of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

AC-Unity Glock 17 and 34 (9mm) Magblock

- Fits 17 round 9mm AC Unity Glock 17 and 34 Magazines.  
- Easy installation at the base of the magazim.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

- This block is designed for the AC-Unity Glock 17 magazines only, and will not work correctly in factory Glock magazines. 

Mossberg MC2SC 9mm Compact Magblock 10 Round Limiter for 14 Round Magazine

- Fits 14 round 9mm Mossberg MC2SC Subcompact and MC2C Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.