Pistols

Glock 20, 40 (10 mm) Magblock Michigan Hunting

- Fits 15 round 10 mm Glock 20 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 8 rounds of 10mm ammunition for hunting in Michigan. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures. 

-This block is design to limit stock 15 round magazines to 8 rounds for hunting in Michigan.

-This block is a cutdown XD/XDM Springfield block and can be used in Gen3 thru Gen5 Glock 20 magazines, including the orange follower Gen5 magazines. You must choose which Generation Glock 20 magazine you have, as that Gen3 thru 4 use the same block and Gen 5 (orange follower) use a differrent block. The Gen 5 Magblock installs at the base of the magazine.

Springfield XDM Elite 10mm Magblock 10 and 15 Round Limiter

• Fits 16 round XDM Elite 10mm magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of 10mm
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 
• NOTE: (Same limiter as the XDM 9mm 10/19, just cut down)

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Sig P365 XMacro 17 Round Magazines

• Fits 17 round 9mm Factory Sig P365XMacro magazines. 
• Save time and money with a simple install.
• Easy installation at the base of the spring.
• Limits the magazine to 10 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
• Lightweight, efficient design. 
• Made of a super strong, heat resistant, fiber reinforced polymer. 

This block will work in the X-Macro, Tacops, and P365-AXG Legion, Fuse, Flux and XL 17-round magazines.

Mossberg MC2C 9mm Sub-Compact Magblock 10 Round Limiter for 13 Round Magazine

- Fits 13 round 9mm Mossberg MC2C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Mossberg MC2C 9mm Compact Magblock 10 Round Limiter for 15 Round Magazine

- Fits 15 round 9mm Mossberg MC2C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for ProMag Sig P320 21 Round Magazines

• Fits 21 round 9mm ProMag Sig P320 and P250 magazines. 
• Also works in factory Sig X-Five 21 round magazines.
• Easy installation at the base of the spring.
• Limits the magazine to 10 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch Mk23 .45 

- Save time and money converting your magazines.
- Fits 12 round .45 H&K Mk23 magazines. 
- Limits the magazinbe to 10 rounds of .45
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 17 Round 9mm Magazines

- Fits 17 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 20 Round 9mm Magazines

- Fits 20 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Springfield DS 1911 Prodigy 26 Round 9mm Magazines

- Fits 26 round 9mm Factory Springfield Prodigy 1911 DS magazines. 
- Easy installation into the follower (See pictures).
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

MecGar (K9) Tanfoglio Stock Master Magblock Round Limiter for 17 Round Magazines

This Magblock fits the Mecgar Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "15" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

*This block is designed for the MecGar (K9) Tanfoglio Stock Master magazine (ONLY), and will not work for factory magazines. 

Ruger Security 9 Compact, PC Carbine Compact Magblock 5 Round Limiter for 10 Round Magazines

This Magblock fits the Ruger Security 9 Compact, PC Carbine Compact, 10 round magazines and will limit them to 5 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 5 round Ruger Security 9 Compact Magazines for New York City.

-No modification to the magazine is required. The spring bottom will need to be bent so that the block can go into the spring.

-Lightweight and will not interfere with magazine reliability.

Remington Model-597 Magblock 10 Round Limiters

- Fits 30 round 22LR Remington Model-597 magazines.
- Easy installation.
- Limits the magazine to 10 or 15 rounds of 22LR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Taurus PT-58 Magblock 10/12 (.380) 10 Round Limiter

This Magblock fits the Taurus PT-58 12 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/12 Taurus PT-58 .380 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original Taurus PT-58 magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.