Magblock 10 Round Limiter CZ-75 Compact, P-01, PCR, Shadow Compact, Shadow Carry 15 Round Magazines

- Fits 15 round 9mm CZ75 Compact, P-01, PCR, Shadow 2 Compact and Shadow 2 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #8 and glue flush at the bottom for 10/15 limiter. 

*Tested on factory CZ75 Compact 15 round magazine that are marked 11rd .40 on the other side. This block will fit the new Shadow 2 Compact and Carry magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

New Magblock 10 Round Limiter for Sig P320-FLUX LEGION 30 Round Magazines

- Fits 30 round 9mm Factory Sig P320 & P320 Flux Legion amagazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Bersa Thunder Plus Magblock 10/15 (.380) 10 Round Limiter

This Magblock fits the factory Bersa Thunder 15 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder .380 magazines to 10 rounds. No external modification to the magazine is required. 

- Simple install to make 10/15 Bersa Thunder Plus magazines. 
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
*Please click on photos for installation instructions. 

If using the Universal Limiter: Cut the universal limiter to between number "9" showing in the indicator notch. Also, sides and front of base sanded down. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

ETS Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm ETS M&P magazines (ONLY). 
- New design installs into the follower like in the pictures.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with ETS S&W Magazines.

-This block is for the ETS S&W M&P 9mm 17-round magazine only.

ETS Glock 9mm Magblock 10 Round Limiter for 31 round Magazines

This Magblock fits the ETS 31 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed under the follower of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/31 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

Magblock 10 Round Limiter for CZ-75 SP-01 18 Round Magazines

- Fits 18 round 9mm CZ-75 SP-01 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*If using our Universal Limiter for this magazine: Cut to #21 and glue flush at the bottom for 10/18 limiter. Slide lock is not used. When epoxy cures assemble magazine. #21 will show in the limiter window notch like in the photos.  

Taurus G3, GX2, GX4 Carry Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus G3 and GX4 Carry, GX2 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus G3 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

 Magblock 10 Round Limiter for ETS Heckler & Koch VP9 9mm

- Fits 17 round 9mm ETS (Elite Tactical Systems) H&K VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation into the follower as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

 *This block is designed for the ETS HK VP9/P30 17-round magazine only. It has not been tested on factory HK VP9 magazines.

AREX Rex Delta Magblock 10 Round Limiters

- Fits 15 round 9mm Factory AREX Rex Delta magazines as shown.
- Tested in AREX Rex Delta 15 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taurus G2C Magblock 10/17 (9mm) 10 Round Limiter

-This Magblock fits the factory Taurus G2C 17 round 9mm magazines and will limit them to 10 rounds.

-Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required.

-This provides an easy method to convert your factory Taurus G2C magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Ruger BX-15 Magblock 10 Round Limiters for .22WMR & .17HMR

- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for ETS Heckler & Koch VP9SK 9mm

- Fits 12 round 9mm H&K VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "6" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

Beretta APX Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta APX Full-Size 15 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Beretta APX Full-Size magazines. This Block Won't Fit The 15-Round Compact/Centurion Magazine.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Para Ordnance P13 .45 magazines

- Fits 13 round .45 Para Ordnance P13 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory Para Ordnance P13 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

*This block is made using a Universal Pistol block cut to #5.