Pistols

Walther P99 and PPQ Magblock 10 Round Limiters

- Fits 15 round 9mm Factory Walther P99 and PPQ magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Walther PPQ and P99 Magblock 10 Round Limiters

- Fits 15 round 9mm Factory Walther PPQ and P99 magazines as shown.
- Will also work in M2 version PPQ Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions: 
To make this limiter out of the Universal  just cut flush at the base with number 15 shown in the indicator notch. Cement together after testing fit. 

Magblock 10 Round Limiter for Sig P226 20 Round Magazines

- Fits 20 round 9mm Sig P226 US made magazines as pictured
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-This block will not work in the newer P226 X-Five/Legion 20-round magazines.

Glock 20 (10 mm) Magblock

- Fits 15 round 10 mm Glock 20 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines like KCI Glock mags.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures. 

* This block will work in factory Glock 20, 40 15-round magazines in Gen 3 through Gen 5 generations. 

Patent Pending

Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.

Save time and money by making your magazines legal. 

NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut.  Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.

- This Magblock fits most Compact and Full-Size magazines from .380, 9mm, .40, 10mm and .45 magazines (might need modifcation for sub-compact magazines).

- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.

- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds. 

Refrence page. Lengths for tested magazines: http://www.magazineblocks.com/universal

The Walther PPX 10/16 limiter will fit this magazine and limit to 10 rounds.

Order here: http://www.magazineblocks.com/magento/products/magblock-kits/pistols/smith-wesson/smith-wesson-m-p-magblock-10-17-9mm.html

Magblock 10 Round Limiter for CZ 75 Compact and Subcompact 9mm 14 Round Magazines by Mec-Gar

- Fits 14 round 9mm CZ-75 compact and subcompact magazines as shown in the photos.
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. CZ brand factory magazines are listed as a different product.

*If using our Universal Limiter for this magazine: Cut to #6 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. #6 will show in the limiter window notch like in the photos.  

Beretta APX Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta APX 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Beretta APX magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta APX magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ETS Glock .40 Magblock 10 Round Limiter for 19 round Magazines

This Magblock fits the ETS 19 round .40 magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/19 Glock .40 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

 *This block is designed for the ETS Glock .40 19 round magazine only. If used in other magazines it might need to be modified. 

Shield Arms Glock 43X and Glock 48 (9mm) Magblock

- Fits Shield Arms 20 round 9mm Glock 43x and Glock 48.
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Bul Armory SASII 2011 170mm 28 Round 9mm Magazines

- Fits 28 round 9mm Factory Bul Armory SAS2 170 mm magazines. 
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for EAA Girsan MC28 15 Round Magazines

- Fits 15 round 9mm EAA Girsan MC28 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #11.5 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 with the top part of #12 will show in the limiter window notch like in the photos.  

Walther PDP, PDP Compact Pro SD Magblock 10 Round Limiters

- Fits 18 round 9mm Factory Walther PDP magazines as shown.
- Tested in Walther PDP Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

-This block will fit the new 18-round PDP SD Pro Compact, Pro-X, E, Pro SD, F-Series Pro Full-Size magazines, along with Q5 Match SF 9mm 18 round mag.

-This block is only intended for the 18-round Walther PDP magazines and won't work in the Compact 15-round magazine. We offer the Walther Compact PDP under Walther Magblocks.

-ATTENTION: Walther has recently changed their locking plate design. So you need to determine which size locking plate you have. An easy way to tell is the new magazines have the blue follower and thin locking plate.

SEE PICS for example. 

Arsenal Strike One Magblock 10 & 15 Round Limiters for 17 Round Magazine

- Fits 17 round 9mm Arsenal Strike One magazines as shown.
- Tested in Arsenal Strike One 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.