Pistols

Beretta PX4 Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta PX4 13 round 9mm magazines and will limit them to 10 rounds.  Installs at tje base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired. 

- Quick install to make 10/13 Beretta PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 13 round Beretta PX4 magazines as seen in the photos. 

 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Sig Sauer P226 Magblock 10 Round Limiter for 15 Round Magazines

This Magblock fits the Sig P226 15 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/15 Sig Sauer P226 magazines. 
- No modification to the magazine is required.
-  Lightweight and will not interfere with magazine reliability.
- Tested on factory Sig P226 magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures. 

*This magazine is known to use two different types of followers depending on where they were manufactured. Please select the country of manufacture or your follower length below. The most accurate way is to measure your follower as shown in the photos. 

Springfield XD .40 Magblock 10 Round Limiter

• Fits 12 round XDM .40 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .40
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Glock 21 and 41 10/13 (.45) Magblock

- Fits 13 round .45 caliber Glock 21 and 41 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45 caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

* Uses a cut off Glock Limiter. The end will not end on a rib, so is not as smooth of a cut, but works great. 

* This block will work in the Ruger LC Carbine 13-round magazine chambered in .45 acp.

Beretta 92 Magblock 10/20 (9mm) 10 Round Limiter for ProMag 20 Round Magazines.

This Magblock fits the ProMag Beretta 92 (20 round) 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is not used. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/20 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Promag Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ-75, Shadow, Shadow 2  17 Round Magazines

- Fits 17 round 9mm CZ-75, CZ Shadow 2 magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-This block works in the Shadow, Shadow2, and AccuShadow 2 17-round magazines.

*If using our Universal Limiter for this magazine: Cut to #11 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines

- Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use so that you can order the correct limiter.

- Fits 13 round 9mm Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

*Will not work with 13 round spring assist ejection magazines. See alternative compatible product HERE. 

Glock .40 Magblock for 22 Round (.40) Magazines

- Fits 22 round .40 Glock and Korean manufacture magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. If yours is different then modifications may be needed.

Smith & Wesson M&P 2.0 Compact Magblock 10/15 Limiter

This Magblock fits the Smith & Wesson M&P 2.0 15 round 9mm magazines and will limit them to 10 rounds.   New design easily installs at the base of the spring. It is held in place with spring tension alone or can be glued or epoxied if desired. Block comes ready to install.

Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures to determine which type you have.

Please Scroll over to see both Type A and Type B photos. Both sets of photos are labeled.

Glock 17 and Glock 34 (9mm) Magblock

- Fits 17 round 9mm Factory Glock 17, Glock 19X and Glock 34 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

New patent pending design allows this limiter to be adapted to fit all other Glock 9mm and .40 magazines including a 15 round option for the Glock 17 magazine. Cutting using an appropriate tool is required. Pre-cut limiters are available.

FNX and FNP .40 Magblock 10 Round Limiter

This Magblock fits the FNX and FNP .40 14 round magazines and will limit them to 10 rounds.  Easily installed in seconds under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round FNX and FNP .40 Magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Magblock Cement

Magblock Cement (15 ml bottle with applicator tip). Will work for a few rifle or up to 15+ pistol limiters depending on amount used.
Features:
- Starts to set in only 1-3 minutes. Can be built up.
- Handling strength: 5 minutes.
- Color: Black.
- Viscosity: paste.
- Full Strength: 12 hours

15 ml bottle

CZ-75 Czechmate Tactical Sport (TSO) Magblock 10 & 15 Round Magblock Limiter

This Magblock fits the CZ-75 Czechmate Tactical Sport 20 round magazines will limit them to 10 rounds. Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/20 CZ-75 magazines.

- No external modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

NOTE: Universal Limiter Instructions: Indicator notch should show "23" which is the maximum length, the base is flush.

Magblock 10 Round Limiter for Sig P229 and P226  12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P229 and P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.