Pistols

FNX-45 Magblock 10 Round Limiters

- Fits 15 round .45 Factory FNX-45 magazines.
- Must check follower type to determine the correct limiter. 
- Limits the magazine to 10 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*Please check your follower and see the photo to determine the correct limiter needed. One type installs under the follower at the top of the magazine. If the follower has a plastic part protruding downward then you need the follower that installs at the bottom of the magazine. 

Ruger P89 and P85/95 Magblock 10 Round Limiter

This Magblock fits theRuger P89 and P85 and P95 15 round magazines and will limit them to 10 rounds of 9mm  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10 round Ruger P89 and P85 Magazines.

-No external modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Universal Limiter Instructions: If using the Universal limiter to make this cut to #9 in the indicator notch and cement the base. Next the sides of the base will need to be sanded down to fit into the bottom of the magazine. The block sold here is pre cut and sanded. 

Beretta 84 Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the factory Beretta 84, 84F, 84FS 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Beretta 84 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 84 magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta 92 Magblock 10/30 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta 92 30 round 9mm magazines and will limit them to 10 rounds.  Easily installed under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/30 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch P30 and USP .40

 - Fits 13 round .40 H&K P30 and USP magazines. 
- Limits the magazine to 10 rounds of .40
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "6" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

Magblock 10 Round Limiter for Sig 15 Round P229-1 Magazines. 
Fits the Sig P228 M11-A1

- Fits the new 15 round 9mm Factory Sig P229-1 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Glock 21 and 41 10/13 (.45) Magblock

- Fits 13 round .45 caliber Glock 21 and 41 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .45 caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. 

* Uses a cut off Glock Limiter. The end will not end on a rib, so is not as smooth of a cut, but works great. 

* This block will work in the Ruger LC Carbine 13-round magazine chambered in .45 acp.

Springfield XDM .40 Magblock 10 Round Limiter

• Fits 16 round XDM .40 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .40
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Springfield XD 9mm Magblock

• Fits 16 round XD and XD Mod 2 9mm magazines.
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of 9mm.
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Springfield XDM XD .45 Magblock

• Fits 13 round XDM and XD .45 magazines. 
• Easy installation under the magazine follower.
• Limits the magazine to 10 rounds of .45
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

Springfield XD and XDM Compact 9mm Magblock

- Fits 13 round 9mm XD and XDM Compact  magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Glock 17, Glock 34 & DERYA DY9 (9mm) Magblock

- Fits 17 round 9mm Glock 17, 34, 45, and 47 Magazines along with Derya DY9 17 round magazine *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* This block is compatiable with Generation 3 thru Generation 6 Glock followers, including the new Orange Gen 5 followers.

* New Add On Option: Add a Glock OEM 10-coil factory spring to your order today. These are Glock factory OEM 10-coil springs (Glock part# SP33510) that will spring new life to your older worn magazine springs. Buy with our Glock 17 magblocks for a discounted price.

Smith & Wesson M&P Full Size 9mm Magblock 10 Round Limiters

- Fits 17 round 9mm M&P magazines. 
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Note: This block will work in the new M&P 2.0 Metal Series Pistols that come with 17rd magazines, along with the 17-round FPC magazine.

Attention: Smith and Wesson has just recenlty changing their locking plate/floor plate design. You will need to determine which type you have. Please see pictures to determine which type you have.

Please Scroll over to see both Type A and Type B photos. Both sets of photos are labeled.

Glock 19, Glock 43x & 48 (9mm) Magblock

- Fits 15 round 9mm Foctory Glock 19, 49, 43X and 48 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. If you have older followers we offer a different product. 

-These will work in the SGM Tactical Glock19 magazine.

-Will work in the "Gen5 Magazines"

-Block is cut slighly short to accomdate Gen5 Glock 19 followers. 

-This block is desinged for the Glock Gen3 thru Gen6 follower designed including Gen5 Orange follower magazines. 

-Now offering a 10-round limiter options if you're running Gen 3 thru Gen 6 factory Glock +2 extensions (See pictures for details).

-This block will work in the new Factory metal Glock 43X and 48 15-round magazines.