ETS Glock 9mm Magblock 10 Round Limiter for 17 round Magazines

This Magblock fits the ETS 17 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/17 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

-This block is designed for the ETS Glock 17-round 9mm magazines only.

Bersa Thunder Ultra Compact Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Bersa Thunder Ultra Compact 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired. This provides an easy method to convert your factory Bersa Thunder Ultra Compact 9mm magazines to 10 rounds. No external modification to the magazine is required. 

- Simple install to make 10/13 Bersa Thunder Plus Ultra Compact magazines. 
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Bersa Thunder magazines as shown in the photos. Other types of magazines will likely require modification of the limiter. 
*Please click on photos for installation instructions. 

If using the Universal Limiter: Cut the universal limiter to between number "6" showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

Smith & Wesson M&P .40 Magblock 10 Round Limiter

- Fits 15 round .40 M&P magazines. 
- Easy installation on top of the locking plate.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Will not fit 2.0 version which needs a slightly longer version  

*Universal Limiter Instructions: Cut to #8 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #8 will show in the limiter window notch like in the photos.  

Springfield XDM .40 Magblock 15 or 10 Round Limiter

• Fits 16 round XDM .40 magazines to limit to 15 rounds. Can also limit 11 round magazine to 10 Rounds. 
• Easy installation under the magazine follower.
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

FN Five-Seven Magblock 10 Round Limiter

- Fits 20 round 5.7 mm Factory FN magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

NOTE: May need to be trimmed a little shorter for proper function with 10 rounds loaded and the slide closed in some pistols.

Now offering a 5 round limiter for those who plan to use this for hunting.

* This block will work in standard FN 5.7 and FN 5.7 MK3 magazines.

Magblock 10 Round Limiter for Sig P229 and P226  12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P229 and P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
-*Same as CZ 10/12 limiter and likely marked as "CZ".

Magblock 10 Round Limiter for Sig P226 (.40) 13 Round Magazines

- Fits 13 round .40 Sig P226 magazines made by Mec-Gar. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
  *Universal Limiter can be used to make this block. Cut the base flush with #8 showing in the indicator notch. 

Magblock 10 Round Limiter for Sig P226 (.40) 15 Round Magazines

- Fits 15 round .40 Sig P226 magazines made by Mec-Gar.  (13+2 extension)
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Glock .45 Magblock 10 and 15 Round Limiter for 27 Round Magazines

- Fits 27 round Factory Glock .45 magazines and Korean manufacture magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of .45
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures. If yours is different then modifications may be needed.

** Select desired magazine capacity before adding to your cart.

Magblock 10 Round Limiter for Sig P226 X-Carry Legion 18 Round Magazines

- Fits 18 round 9mm Sig P226 magazines made by Mec-Gar. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*This Limiter can be made using the Universal Pistol Limiter by cutting flush at the base with #16 in the indicator notch. 
*The product sold at this link is pre-cut and fixed at this length. 

* This block will work in the Tisas Zigan 9mm Mecgar 18-round magazine along with the Steyr ATD 18-round magazine.

 Magblock 10 Round Limiter for Original Heckler & Koch P30, VP9 9mm

- Fits older original (See Pictures for details) 15 round 9mm H&K P30, VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

*Attention: This block will not fit the new HK VP9 A1 15-round magazine. Scroll down below and you will see a posting for the new VP9 A1 K 10/15 round magblock.

Magblock 10 Round Limiter for Sig P229 & P228 13 Round Magazines

- Fits 13 round 9mm Factory Sig P228 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

Smith & Wesson M&P 9 mm Compact Magblock 10 Round Limiter

- Fits 12 round 9mm M&P and M&P 2.0 Subcompact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

FNS-9 and FNS-9 Compact Magblock 10 and 15 Round Limiters

- Fits 17 round 9 mm Factory FNS-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 or 15 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-We now offer this block in 2 options if your magazine has a different follower type. (Please See Photos for Examples).

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.