Magblock 10 Round Limiter for Canik TP9 17 Round Magazines

- Fits 17 round 9mm Factory Canik TP9 Subcompact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 Subcompact 17 round magazine.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #18 showing in the notch to make this limiter. 

Colt 1911 (.22LR) Magblock 10 Round Limiter 

- Fits 12 round .22 Colt 1911 .22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Magblock 10 Round Limiter for ETS Sig P320 17 Round Magazines

- Fits 17 round 9mm ETS Sig P320 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

- This block will only work in ETS Sig P320 10/17 magazines. **It will not work in Sig factory P320 magazine without modification. 

We make a block for the factory Sig P320 10/17 magazine. 

 Magblock 10 Round Limiter for Heckler & Koch USP/P2000 Compact .40

 - Fits 12 round .40 H&K USP and P2000 magazines. 
- Limits the magazinbe to 10 rounds of .40
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "3" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

Walther PPQ (.22LR) Magblock 10 Round Limiter 

- Fits 12 round .22 Walther PPQ .22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Pmag 27 GL9 Magblock 10 Round Limiter 10/27

This Magblock fits the Magpul Pmag 27 GL9 magazines used in 9mm Glocks and will limit them to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if desired.

• Simple install to make 10/27 Pmag 27 GL9 Glock magazines.
• Save Time and Money converting your magazines.
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Patented Design 

Magblock 10 Round Limiter for Pmag 12 GL9 Magazines.

- Fits 12 round Magpul Pmag GL9 magazines for Glock 26.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 12 GL9 Magazines Only. Will not fit standard Glock type Magazines.

ETS Glock 9mm Magblock 10 Round Limiter for 17 round Magazines

This Magblock fits the ETS 17 round 9mm magazines for Glocks and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired for a permanent modification where required. (Epoxy sold separately). 

- Simple install to make 10/17 Glock 9mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Fits ETS magazines like the one pictured.

-This block is designed for the ETS Glock 17-round 9mm magazines only.

FN 509 Magblock 10 and 15 Round Limiters

- Fits 17 round 9 mm Factory FN 509 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 or 15* rounds of 9 mm.
    *Must select below for 15 round or will be shipped as a 10 round limiter
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block will also work in the FN 509 Compact and Edge 17-round magazine too.

FNS-9 Magblock 10 Round Limiter

- Fits 16 round 9 mm Factory FNP-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Beretta 96 Magblock 10/11 (.40) 10 Round Limiter

This Magblock fits the factory Beretta 96 11 round magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/11 Beretta 96 magazines.
- Save time and money and keep your magazines legal. 
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" Beretta 96 magazines as seen in the photos.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ P-10 Sub-Compact 12 Round Magazines

- Fits 12 round 9mm CZ P-10 Sub-Compact factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

FNS-9 Compact Magblock 10 Round Limiters

- Fits 12 round 9 mm Factory FNS-9 compact magazines. 
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Shadow System CR920, CR920P Factory 10/13  (9mm) Magblock

- Fits 13 round 9mm Shadow System CR920, CR920p, and CR920 War Poet  magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 -Block is designed to work in the Shadow Systems subcompact pistol magazine, made by Shadown Systems.