Ruger BX-15 Magblock 10 Round Limiters

- Fits 15 round 22LR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 22LR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Magblock 10 Round Limiter for Sig P226 ,12 Round .40 Magazines. 

- Fits the new 12 round .40 Factory Sig P226 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
- Uses the Universal Limiter cut with #6 in the indicator notch with a flush base.

Beretta PX4 Compact Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Compact Beretta PX4 15 round 9mm magazines and will limit them to 10 rounds. Installs at the base of the spring. A notch allows room for the metal tab on the locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired. (Compact magazines use a different limiter)

- Save time and your expensive factory magazines. Quick install to make 10/15 Beretta Compact PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 15 round Beretta PX4 magazines and CX4 as seen in the photos. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch USP .45 

- Save time and money converting your magazines.
- Fits 12 round .45 H&K USP magazines. 
- Limits the magazinbe to 10 rounds of .45
- Easy installation at the base of the magazine. Sits on top of the locking plate as shown.
- Held in place with tension or can be epoxied in place.
- Lightweight, efficient design. 

FYI: The Universal Pistol Limiter cut to "3" in the indicator notch with a flush base works to limit this magazine to 10 rounds.

Magblock 10 Round Limiter for Sig P365, P365X, 365XL, P365 Luxe 12 Round Magazines

- Fits 12 round 9mm Factory Sig P365, P365X and P365XL magazines. 
- Save time and money with a simple install.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
-See installation video below 

Beretta 92 Compact Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta 92 Compact 13 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Beretta 92 Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" Beretta 92 magazines as seen in the photos.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for CZ P-10 Full-Size 19 Round Magazines

- Fits 19 round 9mm CZ P-10 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #18 and glue flush at the bottom for 10/19 limiter. Slide lock is not used. When epoxy cures assemble magazine. #18 will show in the limiter window notch like in the photos.  

Beretta PX4 Full Size Magblock 10/14 (.40) 10 Round Limiter

This Magblock fits the factory Full Size Beretta PX4 14 round .40 caliber magazines and will limit them to 10 rounds. Installs at the base of the spring. A notch allows room for the metal tab on the locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired. (Compact magazines use a different limiter)

- Save time and your expensive factory magazines. Quick install to make 10/14 Beretta Full Size PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 14 round Beretta PX4 magazines as seen in the photos. 

*Universal Instructions: Cut Universal limiter to #11.5 in the indicator notch. A cutout in the limiter base is needed or the slide lock can be used. See photos for details. 

 Magblock 10 Round Limiter for Heckler & Koch USP Expect 9mm

- Fits 18 round 9mm H&K USP expert magazines. 
- Limits the magazinbe to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "16" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

Magblock 10 Round Limiter for Pmag 12 GL9 Magazines.

- Fits 12 round Magpul Pmag GL9 magazines for Glock 26.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 12 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Pmag 27 GL9 Magblock 10 Round Limiter 10/27

This Magblock fits the Magpul Pmag 27 GL9 magazines used in 9mm Glocks and will limit them to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if desired.

• Simple install to make 10/27 Pmag 27 GL9 Glock magazines.
• Save Time and Money converting your magazines.
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Patented Design 

Ruger Five-Seven Magblock 10 Round Limiter

- Fits 20 round 5.7 mm Factory Ruger magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design.

-The 10-round limiter is marked Ruger 57-15 Round

 Magblock 10 Round Limiter for Heckler & Koch P30SK and VP9SK 9mm

- Fits 13 round 9mm H&K P30SK and VP9SK magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the Universal Kit below or un-glued option below. With this you can easily trim the slide down if needed. Most need to be cut around 4-5.  The Universal Limiter below also gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: 
http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "4-5" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

Magblock 10 Round Limiter for Magpul PMAG 35 CZ Scorpion Evo 3 (9mm) 35 Round Magazines

- Fits 35 round 9mm Magpul PMAG 35 CZ Scorpion Evo and Daniel Defense PCC magazines
- Easy installation at the base of the spring on top of the original locking plate so you wont loose your original.
- Limits the magazine to 10 rounds of 9mm. 
- Lightweight, efficient design. 
- Made of a strong, heat resistant, polymer.

- The new Daniel Defense PCC 9mm is being issued with the Magpul PMAG CZ Evo 35-round magazine.