Springfield Hellcat 9mm 10/13 Magblock

- Fits 13 round 9mm Hellcat Compact  magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for CZ P-07, P-10, P-09 Nocturne Compact 15 Round Magazines

- Fits 15 round 9mm CZ P-07, P-10, P-09 Nocturne Compact factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 Magblock 10 and 15 Round Limiter for Heckler & Koch P30 and VP9 9mm

- Fits 20 round 9mm H&K P30 and VP9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

FYI: This block is made from our Universal Pistol Limiter and is cut so that the number "22" shows up in the indicator notch. The lock tab is not used and the slide is cut so that it is flush with the base of the limiter. The 2 pieces are then bonded together. See photos for details. 

-This block is for factory HK 20 round VP9/P30 magazines, and will not work on magazines with HK +5 extensions.

Magblock 10 Round Limiter for CZ P-10 Compact - P-09 Nocturne Compact 17 Round Magazines

- Fits 17 round 9mm CZ P-10 Compact factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #17 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #17 will show in the limiter window notch like in the photos.  

Walther PPQ M2 Magblock 10 Round Limiters

- Fits 17 round 9mm Factory Walther PPQ M2 magazines as shown.
- Tested in M2 version PPQ Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number 18 shown in the indicator notch. Cement together after testing fit. 

Glock 9mm Magblock for 24 Round (9mm) Magazines

- Fits 24 round 9mm Foctory Glock 17 magazines 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type and magazine base extension shown in the pictures along with the newer black followers. If yours is different then modifications may be needed.

Magblock 10 Round Limiter for CZ P-10 Full-Size 19 Round Magazines

- Fits 19 round 9mm CZ P-10 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #18 and glue flush at the bottom for 10/19 limiter. Slide lock is not used. When epoxy cures assemble magazine. #18 will show in the limiter window notch like in the photos.  

Beretta PX4 Full Size Magblock 10/14 (.40) 10 Round Limiter

This Magblock fits the factory Full Size Beretta PX4 14 round .40 caliber magazines and will limit them to 10 rounds. Installs at the base of the spring. A notch allows room for the metal tab on the locking plate. It is held in place with spring tension alone or can be glued or epoxied if desired. (Compact magazines use a different limiter)

- Save time and your expensive factory magazines. Quick install to make 10/14 Beretta Full Size PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory 14 round Beretta PX4 magazines as seen in the photos. 

*Universal Instructions: Cut Universal limiter to #11.5 in the indicator notch. A cutout in the limiter base is needed or the slide lock can be used. See photos for details. 

Beretta 96 Magblock 10/12 (.40) 10 Round Limiter

This Magblock fits the factory Beretta 96 12 round magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/12 Beretta 96 magazines.
- Save time and money and keep your magazines legal. 
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" Beretta 96 magazines as seen in the photos.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Pmag 21 GL9 Magblock 10 Round Limiter 10/21

This Magblock fits the Magpul Pmag 21 GL9 magazines used in 9mm Glocks and will limit them to 10 rounds. It is held in place with spring tension alone or can be glued or epoxied if desired.

• Simple install to make 10/21 Pmag 21 GL9 Glock magazines.
• Save Time and Money converting your magazines.
• No modification to the magazine is required.
• Lightweight and will not interfere with magazine reliability.
• Patented Design 

Magblock 10 Round Limiter for CZ 75B Full Size 9mm 17 Round Magazines

- Fits 17 round 9mm CZ-75B and CZ-75 SP01 magazines as shown in the photos.
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested on CZ-75 magazines made by Mec-Gar as shown in the photos. 

*If using our Universal Limiter for this magazine: Cut to #11 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for Browning Hi Power 13 Round Magazines with Ejection Assist Spring. 

- Please note that different followers exist for Hi Power magazines. Please see the photos to determine which followers your magazines use so that you can order the correct limiter. This ONLY fits the magazine shown with the assist release spring.

- Fits 13 round 9mm Hi Power magazines with factory release assist spring at the bottom as shown.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made from a modified XDM limiter and will be marked as such.

Disclaimer: *Includes only limiters. Springs, magazines, and other parts shown for installation example only. 

Walther .40 PPQ M2 Magblock 10 Round Limiters

- Fits 11 round .40 Factory Walther PPQ M2 magazines as shown.
- Tested in M2 version PPQ Magazines.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal just cut flush at the base with number #8 shown in the indicator notch. Cement together after testing fit. 

Walther .40 P99 Magblock 10 Round Limiters

- Fits 12 round .40 Factory Walther P99 magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.