Pistols
-
Brugger & Thomet TP9, APC9, MP9, GHM9 10/30 Magblock (9mm)
Magblock 10 Round Limiter for B&T 30 Round Magazines
- Fits 30 round 9mm B&T factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.-Block will work in B&T TP9, APC9, MP9, and GHM9 30-round magazines.
$7.49 As low as: $5.95 -
Ruger BX-15 Hunting Magblock 5/15 (.22WMR & 17HMR) (Hunting)
Ruger BX-15 Magblock 5 Round Limiters for .22WMR & .17HMR for hunting.
- Fits 15 round .22WMR & .17HMR Ruger BX15 magazines.
- Easy installation.
- Limits the magazine to 5 rounds of .22WMR & .17HMR
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.59 As low as: $5.95 -
MecGar Para Ordnance P14 .45 Magblock 10/14
Magblock 10 Round Limiter for MecGar Para Ordnance P14 .45 magazines
- Fits 14 round .45 MecGar Para Ordnance P14 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*** Tested on MecGar Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work.
WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES
$6.59 As low as: $5.95 -
Glock 23 Magblock 10/13 (.40) for Older Style Follower
Glock 23 (9mm) Magblock (For Older Style Followers Only)
- Fits 13 round .40 Foctory Glock 23 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures.$6.59 As low as: $5.95 -
Beretta M9-22, 92FS-22 & M9A1-22 Magblock 5/15 (.22LR) (5 Round Limter)
Beretta M9-22, 92FS-22, M9A1-22 (.22LR) Magblock 5 Round Limiter New Improved Fit
- Fits 15 round .22 Beretta 92-22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 5 rounds of .22 for hunting.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$13.95 As low as: $11.95 -
CZ Scorpion VZ61 Magblock 10/20 (32auto)
Magblock 10 Round Limiter for CZ Scorpion (.32) 20 Round Magazines
- Fits 20 round .32auto CZ Scorpion magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .32auto.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-This block will only work in the ,32 auto, 20 round magazine.
$6.95 As low as: $5.95 -
AREX REX ZERO S1, S2 Magblock 10/17 (9mm)
AREX Rex Zero S1 Magblock 10 Round Limiters
- Fits 17 round 9mm Factory AREX Rex Zero S1 magazines as shown.
- Tested in AREX Rex Zero S1 17 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.Universal Limiter Instructions: To make this limiter out of the Universal just cut flush at the base with number 16 shown in the indicator notch. Cement together after testing fit.
Note: This block has only been tested with magazine that has the spring bunch at the bottom.
$6.59 As low as: $5.95 -
Springfield Elite OSP 10mm 10/11 Magblock (10mm)
Springfield OSP Elite 10mm 10/11 Magblock
- Fits 11 round OSP Elite 10mm magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.$6.50 As low as: $5.95 -
S&W M&P 2.0 10mm Magblock 10/15 (10mm)
Smith & Wesson M&P 2.0 10mm Magblock 10 Round Limiters
- Fits 15 round 10mm M&P magazines.
- Limits the magazine to 10 rounds of 10mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines M&P 10mm-This block will fit standard, 2.0, and Performace Center 15-round 10mm magazines
*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
$6.59 As low as: $5.95 -
Ruger LCP MAX Magblock 10/12 (.380)
Magblock 10 Round Limiter for Ruger LCP Max (.380 ) 12 Round Magazines
- Fits 12 round .380 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger LCP Max$6.59 As low as: $5.95 -
S&W CSX 9mm 10/12 Magblock
Smith & Wesson CSX 9mm Magblock 10 Round Limiters
- Fits 12 round 9mm CSX magazines.
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 12 Round CSX Magazines.$6.59 As low as: $5.95 -
H&K VP70 Magblock 10/18 (9mm)
Magblock 10 Round Limiter for Heckler & Koch VP70 9mm
- Fits 18 round 9mm H&K VP9 magazines.
- Limits the magazine to 10 rounds of 9 mm
- Easy installation under the follower as shown in the photos.
- Lightweight, efficient design.$6.95 -
Promag Canik TP9 Magblock 10/18 (9mm)
Magblock 10 Round Limiter for Promag Canik TP9 18 Round Magazines (ONLY)
- Fits 18 round 9mm Promag Canik TP9 magazines (This Block Will Not Work In Factory Canik TP9 Magazines).
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-Tested on Promag (Only) Canik TP9 magazines. The block may need to be modified to work with magazines from other manufactures.
.* Universal limiter can be cut to #20 showing in the notch to make this limiter.
$6.59 As low as: $5.95 -
Taurus GX4, GX4XL Magblock 10/13 (9mm)
Taurus GX4 Magblock 10/13 (9mm) 10 Round Limiter
This Magblock fits the factory Taurus GX4 13 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX4 magazines to 10 rounds. No external modification to the magazine is required
Has been tested on original factory magazines.
$6.59 As low as: $5.95 -
Sig Sauer 1911 Magblock 10/12 (.22LR)
Sig Sauer 1911 (.22LR) Magblock 10 Round Limiter
- Fits 12 round .22 Sig Sauer 1911 magazines.
- Easy installation. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95