Pistols

Beretta 92XI Squalo & Sabbia Magblock 10/22 (9mm) 10 Round Limiter

This Magblock fits the Beretta 92XI Squalo and Beretta 92XI Sabbia 22 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds under the follower. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/22 Beretta 92XI Squalo magazines.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

- This magblock is designed for the Mecgar made 18-round magazine with a Beretta made +4 extension.

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 5 Round Limiter for Pmag 10 GL9 Magazines.

- Fits 10 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 5 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 10 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #6 showing in the indicator notch. 

Glock 9mm Magblock for 33 Round (9mm) Magazines

- Fits 35 round 9mm Toolman Tactical Glock 35 round magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. This block has been designed and tested for the Toolman Tactical Glock 35-round magazine.

Magblock 10 Round Limiter for Act-Mag - Armscor Sig Sauer P320 17 Round Magazines

- Fits 17 round 9mm Act-Mag - Armscor Sig P320 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

*This block is designed for the Act-Mag - Armscor Sig P320 17-round magazines. This block won't work in factory Sig Sauer P320 magazines.

Magblock 10 Round Limiter for Tisas PX-5.7 20 Round Magazines

- Fits 20 round 5.7x28mm PX-5.7 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7x28mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for Tisas Zigana 15 Round Magazines

- Fits 15 round 9mm Tisas Zigana & PX-9 Carry factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #15 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #15 with the top part of #15 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for Tisas PX-9 Duty and Tactical 20 Round Magazines

- Fits 20 round 9mm Tisas PX-9 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #24 and glue flush at the bottom for 10/20 limiter. Slide lock is not used. When epoxy cures assemble magazine. #15 with the top part of #24 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for Tisas PX-9 Duty and Tactical 18 Round Magazines

- Fits 18 round 9mm Tisas PX-9 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #16 and glue flush at the bottom for 10/18 limiter. 

AREX Rex Zero 7.65 Magblock 10 Round Limiters 

- Fits 18 round 32acp Factory AREX Rex Zero 7.65 magazines as shown.
- Tested in AREX Rex Zero 7.65 18 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 7.65 (.32acp)
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Cement 8oz Large Bottle

Magblock Cement (8 oz bottle). Features:
- Starts to set in only 1-3 minutes. Can be built up.
- Handling strength: 5 minutes.
- Color: Black.
- Viscosity: paste.
- Full Strength: 12 hours 

Large 8 ounce bottle 

Kore Essentials B1 Coyote Micro Battle-Belt (Complete Kit)

-Introducing the World's First Micro Adjustable Battle belt

-Hidden track with 20+ sizing points to adjust in small ¼” increments

-Adjustable while sitting, walking, running, swimming, or even crawling

-Load Rating Of Up to 20lbs to allow for full-size firearms, magazine pouches, dump pouches, and trauma kt, etc

-Size Range for 24" to 48" 

-Each kit comes with Molle outer belt, reinforced velcro inner belt, B1 belt buckel, 1 tip keeper, measuring tape, hex wrench & set screw

-This Battle Belt is ideal for Range Days, Law Enforcement, or Firearm Training Classes

Magblock 10 Round Limiter for ProMag Para Ordnance P14 .45 magazines

- Fits 14 round .45 ProMag Para Ordnance P14 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on Promag Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. 

** This block won't work in Mecgar or factory Para magazines. 

ProMag Springfield XD-9 9mm Magblock

- Fits 15 round 9mm XD-9 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

ProMag Springfield XD-9 9mm Magblock

Magblock 10 Round Limiter Girsan Witness2311 17 Round 9mm Magazines

- Fits 17 round 9mm Girsan Witness2311 marked Checkmate 2011 126 mm magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*Note: This block will work in Staccato 126mm-17rd G3 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.