Pistols

Magblock 10 Round Limiter for Mec-Gaer Glock 17 18 +2  Round 9mm Magazines

- Fits 18 +2 round 9mm Mecgar Glock 17 magazines. 

- Easy installation into the base of the magazine (See pictures).

- Limits the magazine to 10, 15 or 17 rounds of 9mm. 

- Held in place with spring tension or can be epoxied for a permanent modification. 

- Lightweight, efficient design. 

- This block is designed for the Mecgar made Glock 17 18-round magazines that have the +2 extension.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter for Sig Sauer P365 Fuse, Flux, DH3 AXG-Legion, XF-DH3, X, XL 25 Round Magazines

- Fits 25 round 9mm Factory Sig P365 Flux magazines. 
- Save time and money with a simple install.
- Easy installation under the follower with the spring keeping it in place.
- Limits the magazine to 10, 15 and now 17 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification where required to be legal. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer. 

-This block will works in the New P365 Flux 25-round magazines.

Magblock Limiter For MAGPUL AMAG 15 SIG P365 15 Round Magazines

- Fits 15 round 9mm MAGPUL AMAG 15 SG9 SIG P365 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer. This block is made from our Universal Pistol Limiter Kit.

*This block is designed for the New MAGPUL AMAG 15 SG9 P365 15-round magazines. This block won't work in factory Sig Sauer P365 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

TruGlo Mag-Wrench Glock Magazine Take-down Tool

- For removing Glock factory magazine base plates

- Easily change base plates and replace springs

- Made from machined aircraft aluminum 

- Makes breaking down your factory Glock magazines much easier

USPS EXPRESS PRIORITY SHIPPING  Add On Charge (1 - 2 Business Day)

Priority Mail Express is the fastest domestic service offered by USPS, providing 1–3 day delivery (typically 1–2 days) for most U.S. addresses and PO Boxes™. It offers guaranteed overnight to 2-day delivery by 6 PM, with a money-back guarantee if it arrives late.

- This add on charge doesn't include the intial shipping charge and acts as an upgrade to your standard shipping rate.

- Shipping time doesn't include processing time. If you are in a major rush and need this order processed right away, please contact us via email or through our text message line. 

- If you place an order late Friday or on the weekend, your order won't be processed until the next business day, excluding national holidays, as USPS is closed then.

Grand Power Stribog Curved 10 and 15 Round Limiter for 30 Round Magazine

- This block will work with 30 round 9mm Grand Power Stribog curved magazine to make a 10 or 15 round magazine

- This block allows you to use the factory stock locking plate

- This block is designed for the Curved Magazine only. If you need a block for the straight check the links below.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter Mec-Gaer 2011, Prodigy, Tisas Duty DS 22 Round 9mm Magazines

- Fits 22 round 9mm Mecgar 2011 - Prodigy 2011 magazines. 
- Easy installation into the base of the magazine (See pictures).
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik Taran Tactical Combat 18 Round Magazines

- Fits 18 round 9mm Factory Canik w/ +0 TTI extension series magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik magazines with a Taran Tactical +0 extension. The block may need to be modified to work with magazines from other manufactures.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag Beretta 92F Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the Promag Beretta 92F 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Promag Beretta 92F magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Will only work on Promag Beretta 92F (PM Part# BER-A12) magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag Beretta PX4 Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the Promag Beretta PX4 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Promag Beretta PX4 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Will only work on Promag Beretta PX4 (PM Part# BER-A14) magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all. 

Magblock for ACT-MAG Rock Island Armory/Armscor A2 1911 Double Stack 17 Round 9mm Magazines

- Fits 17 round (See pictures for details) 9mm ACT-Mag RIA A2 1911 Double Stack magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Glock 19, Factory G43X and 48 Magblock Retail Ready 3 Packs (9mm) 

- Retail Ready 3 Packs of our popular Glock 19 Magblock Fits 15 round 9mm Factory Glock 19 magazines.  *See details on correct follower types below. 
-Will also fit Korean Glock Magazines.  
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures. If you have older followers we offer a different product. 

-These will work in the SGM Tactical Glock19 magazine.

-Will work in the "Gen5 Magazines"

-Block is cut slighly short to accomdate Gen5 Glock 19 followers. 

Charles Daly PAK-9 GLOCK 9mm Magblock for 33 Round (9mm) Magazines

- Fits 33 round 9mm Charles Daly PAK-9 33 round magazines manufacture magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This block will only work in the Charles Daly PAK-9 9mm 33-round magazines, and will not work in factory Glock 33-round magaiznes without modifcation.

Magblock 10 Round Limiter for Kimber KDS9c (9mm) 18 Round Magazines

- Fits 18 round Kimber KDS9C 9mm magazines
- Easy installation under the follower of the magazine - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber KDS9c 18 round magazine.