Pistols

Smith & Wesson M&P FPC .40 Magblock 10 & 15 Round Limiter

- Fits 20 round .40S&W M&P FPC (Folding Pistol Caliber Carbine) magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Attention: This block has only been tested on the factory Smith & Wesson FPC .40 20-round magazine and might need to be modified to work in other aftermarket magazines. 

Mecgar Beretta 92FS Compact - M9 Magblock 10/18 (9mm) 10 & 15 Round Limiter

This Magblock fits the Mecgar made Beretta 92FS Compact/M9 18 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/18 Mecgar Beretta 92FS Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on Mecgar made Beretta 92FS Compact - M9 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ProMag SIG P320 Magblock (9mm)

- Fits 32 round 9mm Sig P320 magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter Kimber Mako CDS9 (9mm) 13 Round Magazines

- Fits 13 round 9mm CDS9 magazines
- Easy installation under the follower.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako CDS9 13 round magazine.

Magblock 10 Round Limiter For Kimber 2K11 13 Round .45 Magazines

- Fits 13 round .45 Factory Kimber 2K11 magazines. 
- Easy installation into the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Magblock 10 Round Limiter for FN Reflex 18 Round Magazines

- Fits 18 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock For Staccato HD P4 18 Round 9mm Magazines

- Fits 18 round 9mm Staccato - Mecgar HD P4  magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Grand Power Stribog 10/20 Magblock (10mm)

This block will work with 20 round 10mm Grand Power Stribog magazines to make a 10 round magazine. This block will replace the factory retaining plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

SAR-9 Magblock 10 Round Limiter For 21 Round Magazine

- Fits 21 round 9mm Factory Sarsilmaz SAR-9, SAR-9 Socom magazines as shown.
- Tested in SAR9 21 round magazine.
- Easy installation under the follower as seen in the photos.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Beretta 92 Series 170mm Magblock 10/26 (9mm) 10 & 15 Round Limiter

This Magblock fits the factory Beretta 92 Series 170mm 26 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/26 Beretta 92 Series 170mm magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Beretta 92 series 170mm magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Taran Tactical +5/6 Extension Glock 17 and Glock 34 (9mm) Magblock

- Fits 23 round 9mm Glock 17 and Glock 34 Magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for Canik METE MC9L, MC9LS, MC9 PRIME, MC9 Radiant 17 Round Magazines

- Fits 17 round 9mm Factory Canik Mete MC9L, MC9LS and MC9 Prime magazines. 
- Easy installation under the follower with the spring keeping it in place.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik Mete MC9L & MC9LS 17-round magazines.The block may need to be modified to work with magazines from other manufactures.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

 Magblock 10 Round Limiter for Heckler & Koch CC9 9mm

- Fits 12 round 9mm H&K CC9 magazines. 
- Limits the magazine to 10 rounds of 9 mm
- Easy installation on top of the locking plate as shown in the photos.
- New, Improved design.
- Lightweight, efficient design. 

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter for Bul Armory SASII 2011 126mm 18 Round 9mm Magazines

- Fits 18 round 9mm Factory Bul Armory SASII Tac+ and Tac Light 126mm magazines. 
- Easy installation at the base of the magazine. (See pictures for details)
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.