Pistols

Taurus PT24/7 Magblock 10/15 (.40) 10 Round Limiter

This Magblock fits the factory Taurus PT24/7 15 round .40 magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Taurus PT24/7 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT24/7 magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

EAA Girsan MC14T Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the EAA Girsan MC14T 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 EAA Girsan MC14T magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original EAA Girsan MC14T magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P FPC, 2.0 9mm Magblock 10 Round Limiters

- Fits 23 round 9mm M&P FPC (Folding Pistol Caliber Carbine) magazines. 
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory S&W Magazines.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*Attention: This block has only been tested on the factory Smith & Wesson FPC 2.0 23-round magazine and might need to be modified to work in other aftermarket magazines. This block won't work in the new Italian made Xtech M&P FPC 22-round magazines.

 * This block will work in the new S&W M&P Spec Series 23-round magazines.

IWI Jericho 941 Magblock 10 Round Limiter

- Fits 16 round 9 mm US Made IWI Jericho magazines. 
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block is designed to work in the magazine that is shown in the photos only.

Magblock 10 Round Limiter for STI Staccato CS and C 16 Round 9mm Magazines

- Fits 16 round 9mm Factory Staccato STI CS  magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Attention: Staccato has recently started offering the 16-round CS/C magazine with with a new spring and retaining plate. If you have them on your magazine, make sure to choose the correct option below. You will need a shorter block. See Pictures 

Type A Option: The spring is a silver color and the retaining plate doesn't have the raised cross inside of it.

Type B Option: The spring has a black tint to it and the retaining plate has a raised cross.

SAR USA K12 Sport (9mm) Magblock

- Fits 17 round 9mm SAR USA K12 Sport magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Taurus PT809 Compact Magblock 10/13 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT809 Compact 13 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Taurus PT809 Compact magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT809 Compact magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

FN510 Tactical 10mm Magblock 10 Round Limiters for 22 Round Magazine

- Fits 22 round 10mm FN510 Tactical 10mm magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory FN510 10mm 22 round magazine

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

FN510 Tactical 10mm Magblock Limiter

- Fits 15 round 10mm FN510 10mm magazines. 
- Limits the magazine to 10 rounds of 10mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with factory FN510 10mm 15 round magazine

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock 10 Round Limiter for STI Staccato 120mm 15 Round 9mm Magazines

- Fits 15 round 9mm Factory Staccato STI C2 120 mm magazines. 
- Easy installation into the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Only fits the floor plates shown. May need sanding shorter if your magazines have a floorplate locking plate.

Magblock 10 Round Limiter for B&T USW-A1 Full-Size 19 Round Magazines

- Fits 19 round 9mm Brugger and Thomet factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #22 and glue flush at the bottom for 10/19 limiter. Slide lock is not used. When epoxy cures assemble magazine. #18 will show in the limiter window notch like in the photos.  

Magblock 10 Round Limiter for MecGar Sig P228 15 Round Magazines

- Fits 15 round 9mm MecGar Sig P228 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

MecGar Tanfoglio Witness 9mm Magblock Round Limiter for 17 Round Magazines

This Magblock fits the Mecgar Tanfoglio Witness 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Stock Master and  Italia Defiant Stock Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "15" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Magblock 10 Round Limiter for Canik TP9SF Elite Compact 15 + 3 Round Magazines

- Fits 15 + 3 round 9mm Factory Canik TP9SF Elite, Combat, Mete SF, SF Pro Compact magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9SF Elite, Combat, Mete SF, SF Pro Compact magazines that have the +3 adapter.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #18 showing in the notch to make this limiter.