Pistols

Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFx, Mete SFX, Mete SFT, Rival 18 Round Magazines

- Fits 18 round 9mm Factory Canik TP9 series magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.

-We now offer a Canik Rival option. If you're running the Canik Rival aluminum +0 base plates, please select the Canik Rival option. If you choose this option, you will have to run the +0 plates only. 

Beretta 92, 92FS, M9A1 Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the factory Beretta 92 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/15 Beretta 92, 92FS, M9A1, 92G, 92G Elite LTT II 15-round magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" Beretta 92 magazines as seen in the photos.

*** If you have M9 / Mec-Gar marked magazines made by Mec-Gar you must select the option below for a longer limiter. These magazines are marked "M9" on the side or have the dimple in beaded into the magazine. 

NOTE: Multiple variations of this magazine may exist. Consider ordering the "Do not glue" option below.  Another option is the Universal Kit below which you can start with the block cut to around 12 and test the fit. Most need to be cut around 10, but the Universal Limiter gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link:  http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Smith & Wesson M&P22 (.22LR) Magblock 10 Round Limiter New Improved Fit

- Fits 12 round .22 M&P-22 magazines. 
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*Please click on photos for installation instructions. 

Magblock 10 Round Limiter for Sig Sauer P320 Factory 17 Round Magazines

- Fits 17 round 9mm Factory Sig P320 and P250 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

-This block will work in the 17rd X-Carry, M18, M17, X-Legion magazines. It will also work in the P250 16-round magazines too.

Sig Sauer P320 and P250 Compact Magblock 10 Round Limiter for Factory 15 Round Magazines

This Magblock fits the Sig P320 and P250 Compact 15 round 9 mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/15 Sig Sauer P320 and P250 compact magazines. 
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Tested on factory Sig P320/P250 compact, XCompact, Xcompct Pro magazines. The block may need to be modified to work with magazines from other manufactures.

Options: See attached photos and video. Sig has changed their locking plate/retaining plate on the Sig P320 15 round magazine recently. They now use a thinner locking plate on the newer magazines. It's important to watch the whole video to determine which size retaining plate you have in your magazine.

Magblock 10 Round Limiter for Sig P320 (.40) 13 Round Magazines

- Fits 13 round .40 Sig P320 factory magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
  *** *Compatibility Note: This is the same block as a Sig P228 9mm 10/13 Limiter and may be marked as such***

Magblock 10 Round Limiter for CZ 2075 RAMI (9mm) 14 Round Magazines

- Fits 14 round 9mm CZ 2075 RAMI magazines.
- Easy installation at the base of the magazine. - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on factory CZ 2075 RAMI magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures.

FYI: This block is made using out Universal limiter. It is cut flush at the bottom with the number 11-12 shown in the indicator notch. 

Taurus PT92, PT99, PT917, and PT917C Magblock 10/17 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus PT92, PT99, PT917, and PT917C 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/17 Taurus PT92, PT99, PT917 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92, PT99, PT917, PT917C magazines as shown in the photos. Other types of magazines may require modification of the limiter.

Please click on photos for installation instructions.

Magblock 10 Round Limiter for PMAG17 GL9 & Ruger RXM 17 Round Magazines.

- Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.

Magblock 10 Round Limiter for Pmag 15 GL9 Magazines.

- Fits 15 round Magpul Pmag GL9 magazines for Glock 19.

- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits Magpul Pmag 15 GL9 Magazines Only. Will not fit standard Glock type Magazines.

Universal Limiter Instructions: To make this limiter using the universal pistol limiter, cut the base flush with #8 showing in the indicator notch. Then cement base and slide in place. The bottom lock is not used. 

Note: This block will fit the New Shadow Systems MR920 15 round magazine and the New Ruger RXM 15-round magaizne.

.

Magblock 10 &15 Round Limiter for Factory Sig P320 21 Round Magazines

- Fits 21 round 9mm Factory Sig P320 and P250 magazines. 
- Also works in factory Sig X-Five 21 round magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

- This is also the same product as the Sig X-Five limiter for 21 round and "new" P211-GTO magazines.

-NOTE: Universal Limiter Instructions: Use at maximum length with 25 showing in the indicator notch. Use the locking tab, but cut off the lock button for a flat base. Cement Together.

Magblock 10 Round Limiter for Para Ordnance P14 .45 magazines

- Fits 14 round .45 Para Ordnance P14 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on factory Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 30 Round Magazines

- Fits 30 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *This block is designed for the CZ factory Smoke Gray 30 Round magazines only. It will not work in the CZ factory Window magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines. 

CZ Evo Factory Window 10/30 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-evo-10-30-window-magblock-10-and-15-round-limiter-9mm.html

Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 20 Round Magazines

- Fits 20 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*This block is designed for the CZ factory Smoke Gray magazines only. It will not work in the CZ Window magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles. 

CZ Evo Window 10/20 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-evo-window-magblock-10-20-9mm.html