Pistols

Taran Tactical +1 Extension for Sig Sauer P320 10/18 (9mm) Magblock

- Fits 17 round 9mm Sig P320 with the TTI (Taran Tactical Innovations) +1 Magazine Extension.  *See Pictures For Details
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

-This block is designed to work with the +1 TTI Extension for the Sig P320 Full-size 17-round magaiznes.

Smith & Wesson SD40 VE .40 Magblock 10 Round Limiters

- Fits 15 round Promag .40 SD40 magazines. 
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of .40 cal. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Tested with Promag S&W 15 Round Magazines. 
- Save time and money, easier than pinning a magazine. Easily Block Magazines. 

*Universal Pistol Limiter Instructions: Cut to #12 and glue flush at the bottom for 10/14 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #12 will show in the limiter window notch like in the photos.  (Block purchased here already has this done).

This block is design for Promag S&W SD40 magazine only.

Promag Sig Sauer P226 Magblock 10 Round Limiter for 15 Round Magazines

This Magblock fits the Promag Sig P226 (Only) 15 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.

- Simple install to make 10/15 Promag Sig Sauer P226 magazines. 
- No modification to the magazine is required.
-  Lightweight and will not interfere with magazine reliability.
- Tested on Promag Sig P226 magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures. 

Note: This block is designed for the Promag Sig P226 15-Round Magazines only.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Promag Taurus PT111 G2 Magblock 10/15 (9mm) 10 Round Limiter

This Magblock fits the Promag Taurus PT111 G2 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your Promag Taurus PT111 G2 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on Promag magazines only.

Magblock 10 Round Limiter for Promag Browning Hi Power 13 Round Magazines

- Fits 13 round 9mm Promag Hi Power magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

 Note: This block is designed for the Promag Browning Hi Power 13-round Magazine only

Magblock 10 Round Limiter for Grand Power CP380 12 Round Magazines

- Fits 12 round .380 Factory Grand Power CP380 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .380. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

-Tested on factory Grand Power CP380 magazines.The block may need to be modified to work with magazines from other manufactures.

.* Universal limiter can be cut to #8 showing in the notch to make this limiter. 

Magblock 10 Round Limiter for ETS CZ Scorpion Evo & ETS HK MP5 (9mm) 30 Round Magazines

- Fits 30 round 9mm ETS CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

 *This block is designed for the ETS (Elite Tactical Systems) CZ 30 Round magazines only. It will not work in the CZ factory magazines and factory HK MP5. Look at the picture below to determine which magazine you have. We carry blocks for factory and aftermarket CZ style of magazines. 

Magblock 10 Round Limiter Kimber Mako R7, CDS9 and Carbon Compact (9mm) 15 Round Magazines

- Fits 15 round 9mm magazines
- Easy installation under the follower.- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Kimber Mako R7 & CDS9 15 round magazine.

KCI Beretta 92FS Magblock 10/30 (9mm) 10 Round Limiter

This Magblock fits the KCI Beretta 92FS 30 round 9mm magazines and will limit them to 10 rounds.  Easily installed at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/30 KCI Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original KCI Beretta 92 magazines as seen in the photos. Other types of magazines will likely require modification of the limiter. 

*Please click on photos for installation instructions. 

Magblock 10 Round Limiter for Sig P226 20 Round X-Five/Legion Mec-Gar Magazines

This Magblock fits the Sig P226 X-Five Mec-Gar and US Made 20 round magazines (With aluminum addition as shown) made by Mec-Gar and will limit them to 10 rounds.

- Easy installation at the base of the spring.

- Limits the magazine to 10 rounds of 9mm.

- Held in place with spring tension or can be epoxied for a permanent modification.

- Lightweight, efficient design.

- Made of a super strong, heat resistant, fiber reinforced polymer.

Block used is a Universal Pistol Limiter cut to #23.

Magblock 10 Round Limiter for FN Reflex 15 Round Magazines

- Fits 15 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

Magblock 10 Round Limiter for THRIL GEN 2 SM9 MPX 9mm 35 Round Magazines

- Fits 35 round 9mm MPX THRIL GEN 2 magazines.
- Easy installation by inserting the block at the base. This block replaces the factory locking plate.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

 

SAR-9 Magblock 10 Round Limiter For 19 Round Magazine

- Fits 19 round 9mm Factory Sarsilmaz SAR-9 magazines as shown.
- Tested in SAR9 19 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Universal Limiter Instructions:  To make this limiter out of the Universal  just cut flush at the base with number 23 shown in the indicator notch. Cement together after testing fit. 

PSA Dagger Micro (9mm) Magblock

- Fits PSA Dagger Micro 15 round 9mm.
- Easy installation under the follower of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.