Pistols

Magblock 10 Round Limiter for Sig 550 / PE90 30 Round Magazines

- Fits 30 round 5.56mm Sig 550, PE90, SG 550 factory 30 round magazines.
- Easy installation. limiter replaces the original locking plate.
- Limits the magazine to 10 rounds of 5.56mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. 
- Made of strong, lightweight polymer. 
 

Magblock 10 Round Limiter for Sig MPX 9mm 30 Round Magazines

- Fits 30 round 9mm Sig MPX factory magazines.
- Easy installation.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.
 

ATTENTION: This block will not work on the new Sig MPX magazines. See picture #2 for an example of the new style Sig MPX magazine.

AREX Zero S1 Compact Magblock 10 Round Limiters 

- Fits 15 round 9mm Factory AREX Zero Compact S1 magazines as shown.
- Tested in AREX Zero S1 Compact 15 round magazine.
- Easy installation at the base of the spring as shown.
- Limits the magazine to 10 rounds of 9mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Mecgar Smith & Wesson 5900 Series Magblock 10/17 (9mm)

This Magblock fits the Mecgar Smith & Wesson 5900 Series 17 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine, and It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/17 Mecgar S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Mecgar Smith & Wesson 5900 Series Magblock 10/20 (9mm)

This Magblock fits the Mecgar Smith & Wesson 5900 Series 20 round 9mm magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine, and It is held in place with spring tension alone or can be glued or epoxied if desired.

-Simple install to make 10/20 Mecgar S&W 5900 Series magazines.

-No modification to the magazine is required.

-Lightweight and will not interfere with magazine reliability.

Glock 32 (.357) Magblock

- Fits 13 round .357 Sig caliber Glock 32.  *See details on correct follower types below. 

- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .357 Sig caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures. 

Glock 31, 32, and 33 (.40) Magblock

- Fits 15 round .357 Sig caliber Glock 31, Glock 32 and Glock 33 magazines.  *See details on correct follower types below. 

- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .357 Sig caliber ammunition. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures. 

SAR USA CM9 (9mm) Magblock

- Fits 17 round 9mm SAR USA CM9, B6, 2000, P8L, P8S magazines.  
- Easy installation at the base of the magazine.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

Tisas Fatih 13 B380 Magblock 10/13 (.380) 10 Round Limiter

This Magblock fits the factory Tisas Fatih 13 round .380 magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.

- Simple install to make 10/13 Tisas Fatih .380 magazines.
- No modification to the magazine is required.
- Lightweight, efficient design. This is a great way to take your Tisas Fatih 13 B380 magazine down to 10-rounds for state compliance.
- Works on Mecgar Tisas Faith .380 magazines as shown in the photos. Other types of magazines may require modification of the limiter. 
*Please click on photos for installation instructions. 

If using the Universal Limiter: Cut the universal limiter to between numbers 4 to 5 showing in the indicator notch. Glue flush with the base. The front and back of the base will need to be sanded to better fit into the magazine. *The limiter sold here comes with all of this done. 

Magblock 10 Round Limiter for FN Reflex 11 Round Magazines

- Fits 11 round 9mm FN Reflex magazines.
- Easy installation under the follower.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.

MecGar Tanfoglio Witness Magblock Round Limiter for 17 Round Magazines Chambered in .38 Super

This Magblock fits the Mecgar Tanfoglio Stock Master 9mm, 17 round magazines and will limit them to 10 rounds.  Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
-Simple install to make 10 round Tanfoglio Witness Magazines.
-No modification to the magazine is required.
-Lightweight and will not interfere with magazine reliability.

"Universal Limiter Instuctions: To make this limiter from a universal cut the base flush with "13" showing in the indicator notch. Cement the base and slide together. Limiters ordered on this listing come Premade to these specifications. 

Walther .40 P99 Magblock 10 Round Limiters

- Fits 11 round .40 Factory Walther P99 magazines as shown.
- Easy installation under the follower as shown.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.

Stoeger STR-9 Compact 9mm Magblock 10 Round Limiter for 13 Round Magazine

- Fits 13 round 9mm Stoeger STR-9C magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. This is a great way to take your Stoeger STR-9 compact magazine down to 10-rounds for compliance. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Stoeger STR-9 Combat 9mm Magblock 10 Round Limiter for 20 Round Magazine

- Fits 20 round 9mm Stoeger STR-9 Combat magazines. 
- Easy installation under the follower and is held in place with spring tension.
- Limits the magazine to 10 rounds of 9 mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. This is a great way to take your Stoeger STR-9 Combat magazine down to 10-rounds for compliance. 

 *ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.