Pistols
-
Beretta 92 Magblock 10/15 (9mm)
Beretta 92 Magblock 10/15 (9mm) 10 Round Limiter
This Magblock fits the factory Beretta 92 15 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. The factory locking plate is installed under the block. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/15 Beretta 92 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory "Made in Italy" Beretta 92 magazines as seen in the photos.
*** If you have M9 magazines made by Mec-Gar you must select the option below for a longer limiter. These magazines are marked "M9" on the side.NOTE: Multiple variations of this magazine may exist. Consider ordering the "Do not glue" option below. Another option is the Universal Kit below which you can start with the block cut to around 12 and test the fit. Most need to be cut around 10, but the Universal Limiter gives you the option to custom fit to your magazine and tension on the last round. Order the Universal at this link: http://www.magazineblocks.com/magento/magblock-universal-pistol-limiter.html
*If using our Universal Limiter for this magazine: Cut to #9-10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #9-10 will show in the limiter window notch like in the photos. The M9 magazine uses the universal limiter cut to #15.
$6.59 As low as: $5.95 -
Sig P320, M17, M18, X-Five Legion, X-VTAC, Carry, MAX 10/21 Magblock (9mm)
Magblock 10 Round Limiter for Factory Sig P320 21 Round Magazines
- Fits 21 round 9mm Factory Sig P320 and P250 magazines.
- Also works in factory Sig X-Five 21 round magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.- This is also the same product as the Sig X-Five limiter for 21 round magazines.
-NOTE: Universal Limiter Instructions: Use at maximum length with 25 showing in the indicator notch. Use the locking tab, but cut off the lock button for a flat base. Cement Together.
$6.59 As low as: $5.95 -
Smith & Wesson M&P22 Magblock 10/12 (.22LR)
Smith & Wesson M&P22 (.22LR) Magblock 10 Round Limiter New Improved Fit
- Fits 12 round .22 M&P-22 magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
Sig P320, M17, M18, Legion, AXG, X-VTAC, Carry 10/17 Magblock (9mm)
Magblock 10 Round Limiter for Sig Sauer P320 Factory 17 Round Magazines
- Fits 17 round 9mm Factory Sig P320 and P250 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant polymer.-This block will work in the 17rd X-Carry, M18, M17, X-Legion magazines.
$6.59 As low as: $3.49 -
Sig P320 Compact, XCompact, XCompact Pro Magblock 10/15 (9mm)
Magblock 10 Round Limiter for Sig Sauer P320 and P250 Compact Factory 15 Round Magazines
- Fits 15 round 9mm Factory Sig P320/P250 Compact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.*If using our Universal Limiter for this magazine: Cut to #10 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #10 will show in the limiter window notch like in the photos.
-will work in the new Sig P320 RXP XCompact 15 round magazines.
$6.59 As low as: $5.95 -
Sig Sauer P320 Magblock 10/13 (.40)
Magblock 10 Round Limiter for Sig P320 (.40) 13 Round Magazines
- Fits 13 round .40 Sig P320 factory magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
*** *Compatibility Note: This is the same block as a Sig P228 9mm 10/13 Limiter and may be marked as such***$6.59 As low as: $5.95 -
Canik TP9, TP9SA, TP9SF, TP9SFx, Mete SFX, SFT 10/18 Magblock (9mm)
Magblock 10 Round Limiter for Canik TP9, TP9SA, TP9SF, TP9SFx, Mete SFX, Mete SFT 18 Round Magazines
- Fits 18 round 9mm Factory Canik TP9 series magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.-Tested on factory Canik TP9 magazines.The block may need to be modified to work with magazines from other manufactures.
.* Universal limiter can be cut to #16 showing in the notch to make this limiter.
$6.59 As low as: $5.95 -
CZ 2075 RAMI Magblock 10/14 Limiter (9mm)
Magblock 10 Round Limiter for CZ 2075 RAMI (9mm) 14 Round Magazines
- Fits 14 round 9mm CZ 2075 RAMI magazines.
- Easy installation at the base of the magazine. - Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on factory CZ 2075 RAMI magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures.FYI: This block is made using out Universal limiter. It is cut flush at the bottom with the number 11-12 shown in the indicator notch.
$6.59 As low as: $5.95 -
Taurus PT92, PT99, PT917 Magblock 10/17 (9mm)
Taurus PT92, PT99, PT917, and PT917C Magblock 10/17 (9mm) 10 Round Limiter
This Magblock fits the factory Taurus PT92, PT99, PT917, and PT917C 17 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired.
- Simple install to make 10/17 Taurus PT92, PT99, PT917 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Works on original factory Taurus PT92, PT99, PT917, PT917C magazines as shown in the photos. Other types of magazines may require modification of the limiter.Please click on photos for installation instructions.
$6.59 As low as: $5.95 -
PMAG 17 GL9 Glock Magblock 10/17 (9mm)
Magblock 10 Round Limiter for Pmag 17 GL9 Magazines.
- Fits 17 round Magpul Pmag GL9 magazines for Glock 17 and Glock 34
- Easy installation at the base of the magazine and sits on top of the locking plate.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.* Please click the photos for installation instructions. Fits Magpul Pmag 17 GL9 Magazines Only. Will not fit Glock Brand Magazines.
$6.59 As low as: $5.95 -
Para Ordnance P14 .45 Magblock 10/14
Magblock 10 Round Limiter for Para Ordnance P14 .45 magazines
- Fits 14 round .45 Para Ordnance P14 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*** Tested on factory Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work.
WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES$6.50 As low as: $5.95 -
CZ Scorpion Evo Magblock 10/30 (9mm)
Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 30 Round Magazines
- Fits 30 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*This block is designed for the CZ factory Smoke Gray 30 Round magazines only. It will not work in the CZ factory Window magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles of magazines.
CZ Evo Factory Window 10/30 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-evo-10-30-window-magblock-10-and-15-round-limiter-9mm.html
$6.95 As low as: $5.95 -
CZ Scorpion Evo Magblock 10/20 (9mm)
Magblock 10 Round Limiter for CZ Scorpion Evo (9mm) 20 Round Magazines
- Fits 20 round 9mm CZ Scorpion Evo magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.*This block is designed for the CZ factory Smoke Gray magazines only. It will not work in the CZ Window magazines. Look at the picture below to determine which magazine you have. We carry blocks for both styles.
CZ Evo Window 10/20 Magblock: https://www.magazineblocks.com/magento/cz-scorpion-evo-window-magblock-10-20-9mm.html
$6.95 As low as: $5.95 -
Sig P320/P250 Subcompact Magblock 10/12 (9mm)
Magblock 10 Round Limiter for Sig P320 and P250 Subcompact 12 Round Magazines
- Fits 12 round 9mm Factory Sig P320/P250 Subcompact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.$6.59 As low as: $5.95 -
Sig Sauer 550 Magblock 10/30
Magblock 10 Round Limiter for Sig 550 / PE90 30 Round Magazines
- Fits 30 round 5.56mm Sig 550, PE90, SG 550 factory 30 round magazines.
- Easy installation. limiter replaces the original locking plate.
- Limits the magazine to 10 rounds of 5.56mm
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of strong, lightweight polymer.
$6.95 As low as: $5.95