Magblocks

Magblock 10 and 15 Round Limiter for EAA Girsan MC28 17 Round Magazines

- Fits 17 round 9mm EAA Girsan MC28 factory magazines
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*If using our Universal Limiter for this magazine: Cut to #11.5 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. #11 with the top part of #12 will show in the limiter window notch like in the photos.  

Taurus GX4 Magblock 10/11 (9mm) 10 Round Limiter

This Magblock fits the factory Taurus GX4 11 round 9mm magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the magazine. It is held in place with spring tension alone or can be glued or epoxied if desired or required. This provides an easy method to convert your factory Taurus GX4 magazines to 10 rounds. No external modification to the magazine is required

Has been tested on original factory magazines.

Fits Browning BAR .30-06 20 round magazines.

- Easiest and quickest way to make a 5 round Browning BAR Magazine perfect for hunting.

- Can be permanently attached to the spring with epoxy.

- The block attaches to the spring to prevent noise and movement.

- No magazine modifications required.

-Allows loading on a closed bolt with 10 rounds installed.

-New light weight design.

Magblock for Panzer Arms MKA1919 AR-12 5 Round Limiter for 10 Round Magazines (12ga)

• Fits Panzer Arms 10 round magazines and will limit them to 5 rounds. 
• Fits at the base of the magazine. This block will replace the factory locking plate.

Magblock for Rock Island Armory 5 Round Limiter for 9 Round Magazines (12ga)

• Fits Rock Island Armory/Armscor VR60, VR80 9 round magazines and will limit them to 5 rounds. 
• Fits at the base of the magazine. This block will replace the factory locking plate.

Magblock 10 Round Limiter for CZ-82, CZ-83 (.380 and 9x18) 12 Round Magazines

- Fits 12 round .380, 9x18 CZ-82, CZ-83 magazines
- Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380 and 9x18.
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on CZ55 - CZ-82, CZ-83 factory magazines

Hexmag AR-10/SR25 Magblock 5/20

- Magblock 5/20 MCL block for use in polymer Hexmag AR-10/SR25 magazines.

- This block will convert a 7.62x51/.308 20 round magazine to hold only 5 rounds. 

- Uses the original Hexmag locking plates.

Magblock for Catamount Fury 2 Round Limiter for 5 Round Magazines (12ga)

• Fits Catamount Fury 5 round magazines and will limit them to 2 rounds. 
• Fits at the base of the magazine. This block will replace the factory locking plate.

Accuracy International .300 Norma Mag - .338Lupa Mag Magblock 5/10 Limiter

- For use in Accuracy International 10 round magazines as pictured.

- These blocks will convert a 10 round magazine to hold only 5 rounds.

Glock 23 (9mm) Magblock (For Older Style Followers Only)

- Fits 13 round .40 Foctory Glock 23 magazines.  *See details on correct follower types below. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures. 

Magblock 10 Round Limiter for MecGar Para Ordnance P14 .45 magazines

- Fits 14 round .45 MecGar Para Ordnance P14 magazines. 
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .45. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on MecGar Para Ordnance P14 .45 magazines which use a locking plate at the base. The block may need to be modified to work with magazines from other manufactures or sizes. If your magazines do not have a plastic locking plate that sits on top ot the floor plater then they will not work. 

WILL NOT WORK WITH PRO-MAG PARA14 MAGAZINES

H&K Promag USC .45 Magazine Magblock 10/15 Limiter

- For use in H&K Promag USC .45 15 round polymer magazines as pictured.

- These blocks will convert a 15 round magazine to hold only 10 rounds.

PIONEER ARMS AK47 (7.62x39mm) Magazines.

- This block fits the 30 round AK47 magazines in 7.62x39mm made by Pioneer Arms and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

-This block installs at the base.

Magblock for Zastava Z-Mag Polymer ZPAP85 AK74 (5.56x45) Magazines.

- This block fits the Zastava ZPAP85 30 round AK47 magazines in 5.56x45 and will convert them to a 10 round magazine.

- Replaces the lower locking plate for an easy and secure install.

Want to upgrade to the best stainless steel AK replacement springs available? See our upgrade springs here: LINK