Magblocks

Bulgarian AK-74 Magblock for 5.56x45mm 45 round magazine

• This AK-74 block and adapter fits the Bulgarian Smoothside 45 round polymer 5.56x45 mm magazines and will convert them to hold only 10 rounds.
• The new design features a spring catch which will allow an easy attachment point to the spring.
• This prevents the block making noise and epoxy can be added at this point to make it permanent.
• This block will replace the original magazine locking plate.
• This block won't work in the Circle 10 Bulgarian AK-74 chambered in 5.45x39. We sell a block just for that magazine. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

ASC 450 Bushmaster 2 Round Blocked Magazine (2 Round Blocked Magazine)

• This listing is for a ASC 450 Bushmaster magazine blocked to 2-rounds for hunting.
• Magaizne will come block, ready to go, with the Magblock limiter installed and blocking the magazine to 2-rounds for hunting.
• Magazine is made by ASC and blocked by us. Magazine is not pinned and cannot be converted into a standard capacity magazine.
• All factory parts including ASC limiter along with the Magblock limiter installed. 
• Magazine will come with a 5-round limiter and the Magblock branded 2-round limiter. 
• Magazine can be converted back to a 5-round magazine or 7-round magazine in the off hunting season.

This listing is for the sale of a blocked 2-round ASC magazine chambered in 450 Bushmaster. Limited supplies on hand.

Ruger LCP Max MAGPUL EHG (.380 ) 10 Round Magblock Limiter

• Fits 13 round Ruger LCP Max Magpul EHG .380 magazines
• Easy installation at the base of the spring.- Limits the magazine to 10 rounds of .380
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. - Made of a super strong, heat resistant, fiber reinforced polymer. - Tested on Ruger Magpul LCP Max EHG

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Magblock Limiter for Mecgar Para Ordnance P18 (9mm/.38Super) magazines

• Fits 20 round 9mm Mecgar Para Ordnance P18 Competition magazines. 
• Easy installation at the base of the spring.
• Limits the magazine to 10 or 15 rounds of 9mm/.38 super. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 
• Made of a super strong, heat resistant, fiber reinforced polymer.

*** Tested on Mecgar Para Ordnance P18 Competition 9mm/.38 Super magazines which use a locking plate at the base. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Rost Martin RM1S 9mm Magblock 10 Round Limiters

• Fits 14 round 9mm Rost Martin RM1S Magazine
• New design installs under the frollower and is held in place with spring tension.
• Limits the magazine to 10 rounds of 9mm. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design.

*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.

*This posting is for the magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Grand Power Stribog Curved 10 and 15 Round Limiter for 20 Round Magazine

- This block will work with 20 round 9mm Grand Power Stribog curved magazine to make a 10 or 15 round magazine

- This block allows you to use the factory stock locking plate

- This block is designed for the Curved Magazine only. If you need a block for the straight check the links below.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Glock 22, 35 (.40) Magblock (For Older Style Followers Only)

• Fits 15 round .40 Glock 22, 35 magazines.  *See details on correct follower types below. 
• Easy installation at the base of the magazine.
• Limits the magazine to 10 rounds of .40. 
• Held in place with spring tension or can be epoxied for a permanent modification. 
• Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures along with the 2-prong style.

Magblock 10 Round Limiter for Mec-Gaer Glock 17 18 +2  Round 9mm Magazines

- Fits 18 +2 round 9mm Mecgar Glock 17 magazines. 

- Easy installation into the base of the magazine (See pictures).

- Limits the magazine to 10, 15 or 17 rounds of 9mm. 

- Held in place with spring tension or can be epoxied for a permanent modification. 

- Lightweight, efficient design. 

- This block is designed for the Mecgar made Glock 17 18-round magazines that have the +2 extension.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Shield Arms Plus 5 Glock 19 (9mm) Magblock 

- Fits 20 round 9mm Shield Arms +5 basepad extension for Factory Glock 19 magazines.  *See details on correct follower types below.  (Gen3 thru Gen6 mags)

- Easy installation under the magazine follower.
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatible with the follower type shown in the pictures (Gen3 thru Gen6 Magazines). 

Patent Pending

*This block is intended for the +5 Shield Arms basepad extensions attached to a factory Glock 19 magazine, and will limit a 20 round magazinedown to 10 rounds. *See pictures of Shield Arms +5 Extension. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield XDM-XD Pistol Limiter 3 Pack Kit

Save time and money by making your magazines legal. 

- This Springfield XDM-XD Magblock fits most magazines from Springfield XDM series and XD series in 9mm, .40, .45 up to 19- round capacity magazines.

- Easily installs into the follower (For Factory Springfield XDM-XD Magazines Only). It is held in place with spring tension alone or can be epoxied if desired.

- No modification to the magazine is required.

- Lightweight and will not interfere with magazine reliability.

-Now offering Hellcat and Hellcat Pro Cut Blocks (Choose 1 or up to 3) to be cut to fit Hellcat 11, 13, 15 or 17 round magazines. If you choose only 1 then all 3 will be cut to that lenght. 

-If you have a Hellcat/Hellcat Pro with different capacity magazines you can now let us know and we will send the 3-pack cut to size and ready to go for the Hellcat-Hellcat Pro magazines. 

Magblock Limiter For MAGPUL AMAG 17 SIG P365 17 Round Magazines

- Fits 17 round 9mm Magpul Amag 17 SG9 Sig P365 magazines. 
- Easy installation under the follower.
- Limits the magazine to 10 or 15 rounds of 9mm. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 
- Made of a super strong, heat resistant polymer.

*ATTENTION: This block is designed for the New MAGPUL AMAG 17 SG9 P365 17-round magazines. This block won't work in factory Sig Sauer P365 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

M&P 22X Magblock 10 and 15 Round Limiter 

- This block will convert 20 round M&P 22X magazines into a 10 or 15 round magazine.

- Easy to install without damage to your magazines.

- You will have to use your factory retaining plate with our block.

- This block is a cut down version of the M&P15 .22 10/25 magblock and will be marked 10/25.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

AMEND2 SCAR 17 MAGBLOCK  

- New and Improved Easy Install Design.

- This block will fit the Amend2 (Only) 7.62x51mm NATO/.308 for the SCAR 17 Magazines made by Amend2.

- The block installs at the bottom of the magazine spring and will convert 20 round magazines to hold only 10 rounds.

- No modifications to your Amend2 SCAR 17 polymer magazines are needed to install.

- The block can be epoxied to the spring for a permanent modification.

- This block is designed and tested for the Amend2 SCAR 17 magazine only and won't work in factory FN SCAR 17 magazines.

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.

Springfield Hellcat .380 10/13 Magblock

- Fits 13 round .380 Hellcat magazines. 
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .380. 
- Held in place with spring tension or can be epoxied for a permanent modification. 
- Lightweight, efficient design. 

*ATTENTION: This posting is for the Magblock (only) and not for the magazine. We don't currently sell any magazines at all.